Calculate what is the magnetic declination of true bearing

Assignment Help Civil Engineering
Reference no: EM13306016

The true bearing of the line a-b is S 88*50' W, the magnetic bearing of the line d-c is N 89*45' E. What is the magnetic declination?

Reference no: EM13306016

Questions Cloud

What is the moment of inertia before and after : Four 25 kg children are sitting on the edge of a 3 m radius 80kg merry go round that is shaped like a disk. Its frequency is 1/3 Hz, What is the moment of inertia before and after
Determine the required length of splice to be lap spliced : number 9 compression bars in a column are to be lap spliced. there is no excess steel, and the bars are enclosed by a spiral of 3/8 inch diameter wire having a pitch of 3 inch.
Ridiculous price : 2 page executive summary for the attached case, answering the questions listed below.Spoke to Mark, and understand that it's $20 per page making this assignment $40 so please do not ask for some ridiculous price.
Determine angular velocity of sprinkler about the bearing : Water enters a two-armed lawn sprinkler along the vertical axis (normal to the page) at a rate of 80 L/s and leaves the sprinkler nozzles as 1.5-cm diameter jets at an angle of from the tangential direction.
Calculate what is the magnetic declination of true bearing : The true bearing of the line a-b is S 88*50' W, the magnetic bearing of the line d-c is N 89*45' E. What is the magnetic declination
Estimate the time when the temperature at geometric centre : Estimate the time when the temperature at the geometric center of a 6 cm diameter apple held in 2`C water stream reaches 3oC. The initial uniform temperature of the apple is 15`C.
Determine temperature when thermal equilibrium is reached : A 50-kg iron block at 80C os dropped into an insulated tank that contains 0.5m^3 of liquid water at 25C. determine the temperature when thermal equilibrium is reached.
Determine the room temperature when the student comes back : A NCSU student turned on his/her 150 W fan inside his/her room, 4m * 6m * 6m, before going to class in the morning of a summer day, excepting to find his/her room cooler when he/she returns at night.
Determine the tensions in the cables and the reactions at a : The force F is acting on the boom ABC at C points in the direction of the unit vector 0.7071i-0.7071j and its magnitude is 10kN. The boom is supported by a ball and socket at A and cables BD and BE.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Behaviour of structural material using comparative statement

The behaviour of structural materials using comparative statement when they are formed into structural member

  Force on block problem

The block is acted by its weight W=200 lb, a horizontal force Q=600 lb, and the pressure P exerted by the inclined plane. The resultant R of these forces is up and parallel to the inclined thereby sliding the block up it. Determine P and R.

  Determine the volume flow rate

Water with a static pressure of 1.96kN/M2 flows through an 800 mm diameter pipe. A pitot tube pressure gage in this pipe reads a pressure of 5.88 kN/M2. How do you determine the volume flow rate (Q) of the water? (Q = 1.40 M^3/sec, V=2.79 M/sec)

  Calculate uniform load

Calculate uniform load (in addition to self wt.) which will cause the section to begin cracking

  Will the population reach 10000 before the year 2100

A very small country has just gained independence in the year 2000, at which time its population was 1,000. The new country has a birth rate of 0.02 yr-1, death rate of 0.004 yr-1, immigration rate of 0.01 yr-1, and emigration rate of 0.005 yr-1.

  Calculate the elavations at vpc-vpt-high point and station

A 2000 ft vertical curve connects to a +3% grade to a -5% grade. If the vertical tangents intersect at station 52+60.55 and elevation 877.62 ft, calculate the elavations at the VPC, VPT, high point and station 54+00.

  Determine the heat transfer rate from the compressor

In a refrigeration system Refrigerant 22 enters the compressor at 150 kPa and -10 C. It leaves the compressor at 1.0 MPa and 90 C. Assume the mass rate of flow through the compressor is 0.016 kg/s

  Probability of pulling out vehicle at oncoming traffic

Assuming a standard driver reaction time of 2.5 seconds, what is the probability that the vehicle pulling out will get in an accident with oncoming traffic?

  Define the grade of the highway

The grade of the highway, Suppose that a highway rises a distance of 269 feet in a horizontal distance of 2647 feet.

  What are the concentrations of h2po4- and hpo42-

The total phosphate concentration (TOTPO4) in a river is 3.2 mg/L as P. The pH of the river is 7.8. What are the concentrations of H2PO4- and HPO42-

  Design square column footing for in square tied interior

Design a square column footing for a 18-in square tied interior column that supports a dead load D= 220 k and a live load L=180 k. The column isreinforced with eight bars, the base of the footing is 4 ft below grade

  Design a logic circuit

Design a logic circuit that, when enabled with an active-high signal named en, will detect four different ranges of values for a 5-bit input number.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd