Calculate the molar composition of the stack gas

Assignment Help Chemical Engineering
Reference no: EM131401153

A fuel oil is analyzed and found to contain 85.0 wt% carbon, 12.0% elemental hydrogen (H), 1.7% sulfur, and the remainder noncombustible matter. The oil is burned with 20.0% excess air, based on complete combustion of the carbon to CO2, the hydrogen to H2O, and the sulfur to SO2. The oil is burned completely, but 8% of the carbon forms CO. Calculate the molar composition of the stack gas.

Reference no: EM131401153

Questions Cloud

Common forms of retaliation : What are some of the more common forms of retaliation that has been addressed in recent court decisions? What do you think accounts for the increase in retaliation claims? A lack of training?
What will be the work time needed to paint your bedroom : MATH125 Individual Project. Describe and discuss how you will use Polya's problem-solving techniques to determine how much it will cost to paint this room with two coats of paint (on both walls and ceiling). Assuming you can paint 100 sq. ft. per h..
Panera breads staffing ratio : What are Panera Breads staffing ratio's compared to Starbucks and how do these ratio affect customer service.  Does  Panera bread  have better employees or the same type of employees as starbucks
Information about the supply chain : Describe the strategy and why you believe it is most appropriate in this situation. Next, describe the type of retailing operation, as described in Chapter 12, that you will use to sell your shoes. Be sure to include information about the supply c..
Calculate the molar composition of the stack gas : The oil is burned completely, but 8% of the carbon forms CO. Calculate the molar composition of the stack gas.
What interventions would you make to reduce management : In a well-written paper, answer the following questions:On the basis of what you learned in this chapter, what interventions would you make to reduce management turnover?How would these interventions be different if you were trying to reduce non-mana..
Experience or research a global organization : Take a global organization from your experience or research a global organization. Explain how anti-trust polices affect their global operations. Describe how they must change their operations in order to comply with internal laws as well as domes..
What do you think might be major problems in running an ikea : How is the IKEA operations design different from that of most furniture retail operations? What do you think might be the major problems in running an operation like IKEA?
National labor relations board : Does the National Labor Relations Board have the authority to dictate where a company may do business? This needs to be written in APA format, and 500 words minimum with scholarly resources

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Calculate the mole fractions of the product

In the Deacon process for the manufacture of chlorine, HC1 and O2 react to form Cl2 and H20. Sufficient air (21 mole% 02, 79% N2) is fed to provide 35% excess oxygen and the fractional conversion of HCI is 85%.

  Determine the speed at which the machine runs as a motor

Determine the speed at which the machine runs as a motor.

  What is the total filtering area required to deliver 30 ft3

what is the total filtering area required to deliver 30 ft3 of filtrate in 1/2 h?

  Prepare journal entries for the preceding information

Assuming that the company pays income tax a the 40 percent rate, prepare an income statement for Jackson Construction Company.

  What is the area of a metal base for the water heater

A hot water heater measures 20" in diameter. What is the area of a metal base for the water heater, assuming a four-inch overhang for the base beyond the edge of the heater? (Round to the nearest tenth.)

  Develop the designed circuit using breadboard

Develop the designed circuit using breadboard in the laboratory and discuss the effect of resistors on calibration of the sensor with specific emphasis on the sensitivity of the instrument.

  What volumetric flow rate of air into the cooler

In a device to produce potable water, humid air at 90°F, 29.7 in Hg, and 95% relative humidity iscooled to 40°F at constant pressure. What volumetric flow rate of air into the cooler (ft3/min) isrequired to provide 10.0 gal/min of condensed water?

  Calculate the feed rate to the crystallizer in kmol/h

The product is an equilibrium mixture of crystals and a saturated aqueous solution containing 15.4 mole% NaC2H3O2. The effluents (crystals, solution, and water vapour) are all at 50°C.4.2.1 Calculate the feed rate to the crystallizer in kmol/h. (4..

  Hierarchy of control measures used in industrial hygiene

Elaborate on the hierarchy of control measures used in Industrial Hygiene How would you calculate the noise problem at the factory and what control measures would you consider before you recommend the supply of hearing protection to personnel ex..

  At what rates are the steam and water fed to the mixer

A stream of water at 358.15 K (85"C), flowing at the rate of 5 kg s-1 is formed by mixing water at 297.15 K (24°C) with saturated steam at 400 kPa. Assuming adiabatic operation, at what rates are the steam and water fed to the mixer?

  How many electrons are freed at the first dynode

The average energy required to free an electron from the dynode surface is 10 eV. For each incident ectron released from rest, how many electrons are freed at the first dynode? At the last dynode?

  Determining the atmospheric carbon dioxide

A living plant contains approximately the same fraction of carbon- 14 as in atmospheric carbon dioxide. Assuming that the observed rate of decay of carbon-14 from a living plant is 13.6 counts per minute per gram of carbon

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd