Calculate the maximum weight that can be sustained

Assignment Help Civil Engineering
Reference no: EM13319507

A heavy Machine is lowered into a pt by means of a rope wrapped around an 8" diameter stationary pole placed horizontally across the top of the pit. The coefficient of static friction for the rope on the pole is 0.35. The rope maked 1.5 turns around the pole. Calculate the Maximum weight that can be sustained if a person exerts a force a force of 50lb on the end of the rope?

Reference no: EM13319507

Questions Cloud

Does this present a problem for the economy : If you assume that wealth (W) and investment (I) remain constant (we are ignoring the fact that saving adds to the stock of wealth), what are the equilibrium levels of GDP (Y), consumption (C), and saving (S)?
Explain the ph rise after addition of sodium acetate : Why could you have predicted that the pH would rise after addition of sodium acetate to pure 0.40 M acetic acid from part (a) by applying Le Chatelier's principle
How large could the plant be without having the ground level : A 35 percent-efficient coal-fired power plant with effective height of 100 m emits SO2 at a rate of 0.6 lb/10^6 Btu into the plant. If winds are assumed to be 4 m/s at the stack height and just over 3 m/s at 10 m
Determine the volume of the piece of material : An unknown piece of material with a mass of 5.1 kg and density of 1422 kg/m^3 is suspended from a string and then completely immersed in a container of water. Determine the volume of the piece of material
Calculate the maximum weight that can be sustained : A heavy Machine is lowered into a pt by means of a rope wrapped around an 8" diameter stationary pole placed horizontally across the top of the pit. The coefficient of static friction for the rope on the pole is 0.35.
Explain how much naoh in grams is needed to prepare solution : How much NaOH in grams is needed to prepare 546 mL of solution with a pH of 10.00? The molecular weight of NaOH is 40.0 g/mol. Hint: Since NaOH is a strong base it ionizes (disassociates) completely. The OH- concentration equals the initial concen..
Calculate the work produced and heat rejected by the engine : A completely reversible heat engine uses a solar receiver for a hightemperature reservoir and a lake for a low temperature reservoir. The sun maintains the receiver surface at 290 ° F while the lake remains at 40 °F.
The application of the concepts and techniques : Prepare an Outline for your Final Project based on your approved Project Proposal  The Outline must be structured on the Proposal to ensure the application of the concepts and techniques learnt in this module.
Show that the expenditure approach and the income approach : In a simple economy, suppose that all income is either compensation of employees or profits. Suppose also that there are no indirect taxes. Calculate gross domestic product from the following set of numbers. Show that the expenditure approach and the..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what will be the percent conversion

A plug-flow reactor has a conversion of A of 90%, and the reaction is first order. If a dispersed plug-flow reactor has the same volume and has a dispersion number, D/vL of 1.0

  Find the horizontal and vertical components of reaction at a

The three hinged arch is composed of segments of a circle. Support points A and D are not at the same level. Determine (a) the horizontal and vertical components of reaction at A and D. (b) the shear, thrust, and moment in the arch at point C.

  Determine the horizontal distance that the tile will travel

A tiler is removing broken tiles from the roof of a house, and throws a tile with a velocity of 8 m/s at an angle of 20 degrees above horizontal. At the point of release the tile is 5.2 m above the ground surface.

  Determine what is the normal depth laid on a slope

For a 42-inch concrete stormwater pipe (n = 0.014), laid on a slope of 0.025%, carrying a flow rate of 10 cfs, what is the normal depth

  Describe electron and hole motions in a p-n junction

Briefly describe electron and hole motions in a p-n junction for forward and reverse biases;

  Determine annual volume of lanfill comsumed in meter

A MSW landfill is being designed to handle solid waste generated by Binford at a rate of 50 Mg/d. It is expected that the waste will be delivered by compactor truck on a 5d/week basis.

  Determine the elastic elongation that would be expected

determine the elastic elongation that would be expected for a 16-mm-diameter rod of the same material if the rod were 1.6 m long and subjected to a tension force of 3.3 kN.

  Draw the bending moment and shear force diagrams

Draw the Bending Moment and Shear Force diagrams for the girder and calculate the maximum tension in the cable.

  Scale of a spring balance problem

The scale of a spring balance reading from 0 to 235 N has a length of 13.0 cm. A fish hanging from the bottom of the spring oscillates....

  Design continuous slab showin using aci moment coefficients

The slabs are to be built integrally with the end supports, which are spandrel beams. fy = 60,000 psi, fc' = 4000psi normal-weight concrete. Clear spans are 15 feet, 18 feet and 15 feet. with the longitudal span of 38 feet.

  Calculate what is the flow rate of water over a length

The pressure drop in a 10 cm galvanized iron horizontal pipe (ks=.15mm) carrying water over a length of 50 m is 30 kPa. What is the flow rate

  What is turbine work output per kilogram of steam circulated

Steam enters the turbine of a single vapor power plant with a pressure of 10 MPa and a temperature of 580 C and expands adiabatically to 6 kPa. The isentropic turbine efficiency is 85%.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd