Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A froth flotation process is used to concentrate copper ore. It is a two stage process with a rougher stage followed by a cleaner stage. The cleaner tailings are returned to the rougher flotation. Both stages are non-reactive unit operations and both operate at steady-state. the analytical profile of the entire flotation circuit is:
The rougher flotation feed grade is 0.50%Cu
The rougher concentration grade is 11.9%Cu
The rougher tailings conain 0.10%Cu
The final cleaner concentrate grade is 33.0%Cu
The cleaner tailings contain 4.5%Cu
a. Calculate the overall copper recovery for this process.
b.Calculate the copper recovery inthe cleaner flotation operation.
c. assuming the flotation process treats 75 tons/hr of copper ore, calculate the circulating load (in tons/hr) of cleaner tailings that return to the rougher flotation under steady-state operation.
A storm sewer is carrying snow melt containing 1200 mg/L of NaCl into a small stream. The stream has a naturally occurring NaCl concentration of 20 mg/L. If the storm sewer flow rate is 2000 L/min and the stream flow is 2.0
for the retaining wall shown below determine the followinga whether the wall has adequate sliding resistance b whether
A rectangular channel of width 12 ft has an upstream slope of 0.02 ft/ft and a downstream slope of 0.0005 ft/ft. Both reaches have lengths of 500 ft. The upstream reach has a Manning's roughness of 0.016 and the downstream reach has a roughness of 0...
A series of small packages, each with a mass of 0.5 kg, are discharged from a conveyor belt. Knowing that the coefficient of static friction between each package and the conveyor belt is 0.4, determine (a) the force exerted by the belt on the package
A rectangular channel is 25ft wide and has a flow of 500 cfs at a velocity of 5ft/s. (a) Determine the specifc energy of water in the channel. (b) What is the criticl depth of water in the channel (c) What is the critical velocity
Just below the point where a continuous discharge of pollution mixes with the river, the BOD is 10.9 mg/L and the DO is 7.6 mg/L. The river and waste mixture has a temperature of 20oC, a deoxygentation constant of 0.2/day
A hydraulic shovel will be used to excavate sandy clay and load into a 12 BCY dump trucks. The shovel's production at a 100% efficiency is estimated to be 300 BCY/h. and efficiency is 0.80. Truck travel time is estimated to be 8.0 minutes
For a substance that decays according to first-order kinetics, what is the equivalent PF rate constant that would be used to describe treatment in a series of three CM reactors in terms of flow (Q), the total volume in the system (V),
The boiling water passes through copper pipes that have a wall thickness of 4 millimeters and a surface area of 0.12 square meters per meter length of the pipe. Find the total length of pipe (there are actually many pipes in parallel)
THE VERTICAL ANGLES WERE READ AT BOTH ENDS OF THELINE AND THEN AVERAGED USING A CO-AXIAL THEODOLITE/EDM COMBINATION.IF THE ELEVATION OF THE INSTRUMENT STATION IS 630.15 FT
Knowing that the coefficient of static friction is 0.25 at all surfaces of contact, determine the smallest fprce P that should be applied to one of the wedges.
In an oedometer test, the void ratio of a clay sample changed from 1.62 to 1.41 as the vertical effective stress imposed on the sample was increased from 100 kPa to 200 kPa. Later on, the vertical effective stress on the sample was decreased
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd