Calculate how much bod is remaining after 12 days

Assignment Help Civil Engineering
Reference no: EM13313648

A 250 cubic meter reaction tank contains a waste water having an ultimate BOD concentration of 755 mg/L. If the BOD reaction rate constant is -0.352/day, how much BOD is remaining after 12.0 days?

Reference no: EM13313648

Questions Cloud

Calculate the area of reinforcement required : A short Reinforced Concrete column is 300mm x 400mm. It is required to carry an ultimate load of 1500kN and an ultimate major axis bending moment of 300kNm. Calculate the area of reinforcement required.
Find the batterys internal resistance : A battery has an emf and an internal resistance . When the battery is connected to a 25 ohm resistor, the current through the battery is 0.65 A. Find the battery's internal resistance
What is the longest amount of time that particle can take : If the tank is 2 meters deep and the particle enters the tank at the surface of the water, what is the longest amount of time that the particle can take to settle, if it is to be removed
Explain what is the ph of the resulting solution : A solution was prepared by mixing 0.01150 HA and 0.01150 mol of NaA in a 500 ml Volumetric flask and diluting to mark. What is the pH of the resulting solution
Calculate how much bod is remaining after 12 days : A 250 cubic meter reaction tank contains a waste water having an ultimate BOD concentration of 755 mg/L. If the BOD reaction rate constant is -0.352/day, how much BOD is remaining after 12.0 days
Compute the new partial pressures after equilibrium : After a quantity of NO2(g) is injected into the mixture, the total pressure jumps to 812 torr. Calculate the new partial pressures after equilibrium is re- established.
What is the work done by this force on the truck : The brakes of a truck cause it to slow down by applying a retarding force of 7710 N to the truck over a distance of 1050 m. What is the work done by this force on the truck
Explain equilibrium mixture of no2(g) and n2o4(g) : At 320.0 K, an equilibrium mixture of NO2(g) and N2O4(g) has partial pressures of 393 torr and 292 torr, respectively. After a quantity of NO2(g) is injected into the mixture, the total pressure jumps to 812 torr.
What is the sky divers speed when parachute opens : A skydiver jumps out of a plane and fall 7.7 seconds before opening the parachute. What is the sky diver's speed when parachute opens

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the maximum stress and strain in the ball

A rubber ball is inflated to a pressure of 65 kPa .At that pressure the diameter of the ball is 240mm and the wall thickness is 1.25 mm.The rubber has a modulus of elasticity E of 3.6 Mpa and a poisoon'd ratio of 0.48.

  Determine the concentration of ubod in the effluent

If the length of the river connection between the two lakes is equal to 3km and the velocity in the river is equal to 0.4 m/s, determine the concentration of UBOD in the effluent from the second lake.

  Calculate the axial stress in the copper and the steel

A steel flat bar of dimensions 4x1x12 inches is PINNED between two copper bars of dimensions 4x2x12 inches at room temp. The PINNED assembly is then cooled by 200 degrees fahrenheit.

  Determine the pressure head at the top of the dome

A closed cylindrical tank filled with water has a hemispherical dome and is connected to an inverted piping system. The liquid in the top part of the piping system has a specific gravity of 0.68.

  How much will be in a high-yield account at national bank

How much will be in a high-yield account at the National Bank of Arizona 12 years from now if you deposit $5000 now and $7000 fi ve years from now. The account earns interest at a rate of 8% per year, compounded quarterly

  Determine the angle of twist

A beryllium copper wire having diameter of 1-50 mm and length of 40mm is used as a small torsion bar in an instrument. determine what angle of twist would result in the wire when it is stressed to 250 mpa.

  Latent heat of fusion problem

What mass (in grams) of steam at 100°C must be mixed with 387 g of ice at its melting point, in a thermally insulated container, to produce liquid water at 26.0°C? The specific heat of water is 4186 J/kg·K. The latent heat of fusion is 333 kJ/kg, ..

  Find the magnitude and location of the resultant force

You are to assume that seawater at 77oF will be used in the tank and the curved portion forms a quarter of a circle. The tank is open to the atmosphere. The overall height, h2, is 20ft deep. The radius of the curve, R, is 5ft. The width of the..

  Two immiscible fluids are in contact

Two immiscible fluids are in contact. Fluid I is denser and is also well mixed. The concentration of species a is cao everywhere within this fluid and the temperature in fluid I is held constant at To.

  Compute the max acceptable tensile service load for angle

The service live load is three times the dead load. The 4-in leg contains a single line of 7/8 inch diameter bolts, and the 6 inch leg contains a double gage line of 7/8 inch diameter bolts.

  What is the water-balance estimate of the lake evaporation

Measurements of water-balance components have been made for a one-year period on a lake with an area of 4.4 km2 with the following results: P = 350 mm, Qsi = 2.33 x 107 m3, Qgi = 2.2 x 105 m3, Qgo = 0.6 x 105 m3, and Qso = .10 x 107 m3.

  Determine the strains in each of the transveral axes

A 12inx1inx3in ASTM 36 steel bar is loaded with an axial load of 90,000lbs and a transversal load of 288,000lbs (force applied perpendicular to the 1in side) The proportionality limit is 34,000psi.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd