Calculate for a basis of 1 m3 of gas fed to the condenser

Assignment Help Chemical Engineering
Reference no: EM131134170

A stream of hot dry nitrogen flows through a process Unit that contains liquid acetone. A substantial portion of the acetone vaporizes and is carried off by the nitrogen. The combined gases leave the recovery unit at 205°C and 1.1bar and enter a condenser in which a portion of the acetone is liquefied. The remaining gas leaves the condenser at 10°C and 40bar. The partial pressure of acetone in the feed to the condenser is 0.100bar, and that in the effluent gas from the condenser is 0.379 bar.

Assume ideal gas behavior.

(a) Calculate for a basis of 1 m3 of gas fed to the condenser the mass of acetone condensed (kg) and the volume of gas leaving the condenser (m3).

(b) Suppose the volumetric flow rate of the gas leaving the condenser is 20.0m3/h Calculate the rate (kg/h) at which acetone is vaporized in the solvent recovery unit.

Reference no: EM131134170

Questions Cloud

What makes it a social movement : What is an example of a social problem? What makes it a social problem? What is an example of a social movement? What makes it a social movement? What is the difference between the two?
How many gram-moles of no2 are in the vessel at 473 k : The equilibrium constant should vary with temperature according to the relation Kp = ae-b/T use the results of part (b) to determine the values of a and b by a graphical curve-fitting procedure. [Suggestion: Use the spreadsheet program from part (..
What is the standard time : A time study analyst has measured 20 cycles of a task, and has found that the average time is 16 minutes, and the performance rating is 92%. If the allowance is 17%, what is the standard time?
Conflicting interests of various corporate constituencies : What do you think about the arguments for and against the conflicting interests of various corporate constituencies? In whose interests should the corporation be run? To whom should a company be responsible? Does it matter if the company is a private..
Calculate for a basis of 1 m3 of gas fed to the condenser : Suppose the volumetric flow rate of the gas leaving the condenser is 20.0m3/h Calculate the rate (kg/h) at which acetone is vaporized in the solvent recovery unit.
Specify the key characteristics of social law : Compare and contrast the major characteristics of Social Law with 1 other family of law of your choosing.- specify the key characteristics of Social Law
The reduction of the fixed cost of an alternative : In breakeven analysis, the reduction of the fixed cost of an alternative, while leaving all other costs of alternatives the same. Which of the following is generally not a reason businesses focus on short-term cost reduction instead of long-term cost..
Were you surprised to read about the african lions : Were you surprised to read about the "African Lions"; Algeria, Botswana, Egypt, Libya, Mauritius, Morocco, South Africa, and Tunisia? What surprised you most?
Formulate this case as a spreadsheet model and solve it : Based on your understanding of the Transportation Model, Formulate this case as a spreadsheet model and solve it using SOLVER module on Excel. Comment on the obtained results using your own words

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Isotopic composition as the oxygen in the water

Algae grown in water containing some 18O (in H2 18O) evolve oxygen gas with the same isotopic composition as the oxygen in the water. When algae growing in water containing only 16O were furnished carbon dioxide containing 18O, no 18O was found to..

  Propose a model which will show how temperature

Propose a model which will show how temperature in the tank changes with time. State assumption used. Solve this model to obtain T(t) given that T(t=200s) = 50°C.

  Calculate the magnetic flux in the core

Now suppose a 10-mm air gap is cut across the toroid. Determine the current that must be supplied to the coil to produce the same value of magnetic flux density as in part (a). You may neglect leakage and fringing.

  Find the power factor at the high-voltage terminals

If the transformer is supplying full load at 230 V and 0.8 lagging power factor, determine the voltage regulation of the transformer. Also, find the power factor at the high-voltage terminals.

  What is the range of speed for stable operation of the motor

Find the slip at which the maximum developed torque occurs.

  Determine the output voltage increment

If the output voltage is to indicate increments of 0.1 V, find the bits that must be used.

  Department of chemical engineering

Technical specialists at the company have flagged part of an internal calculation by a junior engineer as potentially erroneous. The excerpt is given below. Please prepare a brief memo for our Quality Assurance department describing the errors and pr..

  Amount of heat is necessary to synthesize

The enthalpy change of reaction for the balanced equation (with lowest whole-number coefficients) is H  67.7 kJ. If 2.50  102 mL of N2(g) at 100.C and 3.50 atm and 4.50  102 mL of O2(g) at 100.C and 3.50 atm are mixed, what amount of heat is..

  A shell and tube heat exchanger

A shell and tube heat exchanger is to be used in a corrosive service. If carbon steel tubes are used, the cost of the exchanger is estimated to be $160,000, and it is expected that the exchanger will need to be replaced after two years.

  Calculate the tower diameter and packing height

Calculate the tower diameter and packing height and calculate NTU - Ammonia in air being absorbed by a pure water stream in a packed tower.

  What is the required volume of the tank

Use the truncated virial equation along with the second virial coefficient calculated above to estimate the volume of water at 200 °C, 14 bar. How does this value compare with the volume obtained from the steam tables? Discuss this comparison.

  What operator response would be required in each case

Which alarms should activate a shutdown trip, and which valves should be closed?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd