User Account

All Pages

Blast fume clearance time

Assignment Help Other Engineering
Reference no: EM13318835

Blast fume clearance time

For the following

Face dimensions 5 m high by 5 m wide

Face advance 4 m

Length of development before blast 700m

Rock density 2.7 tonnes/m3

ANFO factor 2 kg/m3 rock broken

Face ventilation 22 m3/s

NO2­­ gas production rate 3.5 kg per tonne of ANFO

NO2 TWA is 3 ppm

Determine

  1. Volume of rock to be blasted
  2. Tonnes of rock to be blasted
  3. ANFO used
  4. Fume throw back distance
  5. Volume of fumes immediately after the blast
  6. Volume of NO2 gas produced
  7. Concentration of NO2 in fume throw back zone immediately after the blast
  8. Concentration of fumes after they have spread throughout the drive but before they have entered the decline
  9. Time for diluted fumes to fill the drive
  10. Time for fumes to be diluted below TWA concentration
  11. Total time for fumes to clear

Reference no: EM13318835

Questions Cloud

Calculate the maximum height reached by the ball : A ball is thrown initial 10m/s at 30 degree above horizon from a platform of 20 meter above the ground. calculate the maximum height reached by the ball
Determine what is the torque of shaft be : if shaft A have 1200N.m torque with 25cm diameter and the shaft B have diameter of 52cm what is the torque of shaft be
Determine the total magnification : The focal length of the objective and eyepiece in a compound microscope are 0.8 cm and 2.5 cm, respectively. What is the total magnification
The e-health model of health delivery : How should information from the e-Health model of health delivery be presented to patients without needlessly alarming them? Should health information from providers and the consumer be co-mingled? Why or why not?
Blast fume clearance time : Determine concentration of fumes after they have spread throughout the drive but before they have entered the decline
What is the amplitude of the oscillations : A simple harmonic oscillator consists of a block of mass 1.70 kg attached to a spring of spring constant 144 N/m. What is the amplitude of the oscillations
Explain a sample of ideal gas is in a sealed container : A sample of ideal gas is in a sealed container. The pressure of the gas is 695 torr, and the temperature is 27 degrees celsius. If the temperature changes to 84 degrees celsius with no change in volume or amount of gas, what is the new pressure,P2..
Find the magnitude of the magnetic field within the solenoid : A long solenoid has a length of 0.72 m and contains 1395 turns of wire. find the magnitude of the magnetic field within the solenoid
Asian foreign policy : Asian Foreign Policy

Reviews

Write a Review

Other Engineering Questions & Answers

  How to prevent type of corrosion

Offer an explanation for why cracking might have occurred and provide at least three suggestion on how to prevent this type of corrosion.

  Methods of methane drainage

Describe the various methods of methane drainage available to drain gas for longwall mining operations and methane drainage of longwall operations what factors influence the spacing of drainage boreholes?

  Configurations for controlled and uncontrolled rectification

Understand common configurations for controlled and uncontrolled rectification and understand common configurations for controlled and uncontrolled rectification

  Plot the bod remaining in the water

CEE 357 Winter 2014, HW#5, How much HOCl is needed to react with each mg/L of S in the latter reaction? Plot the BOD remaining in the water

  Determination of a sized design layout

Determination of a sized design layout of an aircraft concept to meet a given mission specification.

  Find concentrate of solution

Environmental engineering, CEE 357 Win 2014 HW#3,  A solution contains 3 x 10 -4  M H 2 CO 3  and 1.5 x 10 -3  M HCO 3  - . How much CO 3  2-  is in the solution?

  Determine the minimum acceptable wall thickness

Determine the minimum acceptable wall thickness using thin cylinder theory and determine the minimum acceptable wall thickness using thick cylinder simulation software.

  Make a program that will determine the number of terms

write a program that will determine the number of terms in the series that are needed to approximate the function to a specified accuracy. Prompt the user to enter values for x and for an epsilon, where epsilon is the accuracy desired. Use a funct..

  Define kirchoffs first and second laws

Determine the characteristic curves for the fan and define Kirchoffs first and second laws - determine the pressure to be developed by a single mine fan to ventilate the workings.

  Analyze a drier that reduces the moisture content

Analyze a drier that reduces the moisture content of bentonite from 11% (bone dry basis) to 4% bdb. Assume the plant processes 100 tons/day is a gas fired rotary kiln

  Write a report on environmental companies

Write a report on environmental companies

  Determine the volume of seawater

CEE 357 Win 2014 HW#1:  What volume of seawater would have to be processed to recover one kilogram of silver, assuming an extraction process with 100% efficiency?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd