Below are some of the advantages of using precast

Assignment Help Civil Engineering
Reference no: EM13900245

Below are some of the advantages of using precast (precast concrete), except:
A. The timing of the shorter
B. Control of technical quality can be achieved
C. Cost cheaper
D. Not affected by weather
E. The structure is stronger

Reference no: EM13900245

Questions Cloud

The advantages of using precast floor slab half : The advantages of using precast floor slab half is:A. Reducing the volume of concrete
Give atleast three methods : Give atleast three methods that can be use to analyse structures
Problems were found in the use of precast concrete : Problems were found in the use of precast concrete, is:A. Need a larger initial investmentB. Requires fabricating a very wide area
Determine ratio of cash to monthly expenses as of december : Determine the ratio of cash to monthly expenses as of December 31, 2004, 2003, and 2002. Round to one decimal place. Based upon (1) and (2), comment on OccuLogix's ratio of cash to monthly operating expenses for 2004, 2003, and 2002.
Below are some of the advantages of using precast : Below are some of the advantages of using precast (precast concrete), except:A. The timing of the shorterB. Control of technical quality can be achieved
Describe the role of the information technology professional : Describe the role of the information technology professional and develop an information technology strategic plan to address and solve a proposed business problem.
The comments and critique are concise and error-free : Ensure both the comments and critique are concise and error-free.
A metal a is diffusing into another pure metal b : 1. A metal A Is diffusing into another pure metal B to form an alloy. After 30 hours, the concentration of A is 3.2wt% at a distance of 1.5mm from the interface between metals A and B. The diffusion coefficient of A in B corresponding to the reaction..
Find proportions in given question : A recent newspaper article reported the results of a survey of well-educated suburban parents. The re- sponses to one question indicated that by age 2, chil- dren were watching an average of µ 5 60 minutes of television each day. Assuming that the..

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the elongation of a rectangular bar to an axial load

What is the elongation of a rectangular bar (cross section 2 inch * 2 inch length 4 ft) When it is subjected to an axial load of 80,000 lbs. Assume the material of the bar has the following properties G = 7,700 KSI, V =0.30

  What is the expression for that work

A piston cylinder combination contains 2 kg of air at the ambient temperature of 25C and at the unknown ambient pressure. To provide a source of cooling on this hot Florida day

  Design and detail the steel reinforcement for the section

The beam has a rectangular section which is to be singly reinforced. Given pt=1.1% design and detail the steel reinforcement for the section where the moment is maximum

  Determine the magnitude of the forces f1 and f2

The vertical reactions a supports A and B for the feame are 13 kip and 37 kip, respectively. Determine the magnitude of the forces F1 and F2. Also, determine the horizontal reaction at A.

  What flowrate can be expectedthrough the line

An 18 in. newriveted steel pipe 1000 ft long runs from elevation 150 ft toelevation 200 ft. If the pressure at elevation 150 ft is 100 psiand at elevation 200 ft is 72 psi, what flowrate can be expectedthrough the line? (use e = 0.003 ft)

  Find dry unit weight-void ratio and degree of saturation

A soil specimen has a water content of 18% and a wet until weight of 118.5 lb/ft. The specific gravity of solids is found to be 2.72. Find the dry unit weight, void ratio, and degree of saturation.

  When finding the projection of p onto q what to do with 15n

Force P is directed from point A(5,10,3) towards point B(1,-2,5) and has a magnitude of 15N. Vector Q=6i+2j-5k. When finding the projection of P onto Q what do you do with the 15N

  How much energy was supplied by the explosion

A two stage rocket with a total mass of 925kg is traveling at a speed of 6.6 10^3 m/s away from the earth . A predesigned explosion separates into two sections of equal mass that move with a speed of 2800m/s relative to each other along the original ..

  Calculate minimum-sized sand particle that would be removed

Calculate the minimum-sized sand particle that would be removed in the chamber. To be removed, the particles must settle the depth of 2 m during the period the wastewater spends in the chamber (dT=V/Q).

  Determine time of queue dissipation

An incident occurs on a freeway that has a capacity in the northbound direction, before the incident, of 4000 veh/h and a constant flow of 2900 veh/h during the morning commute. ( no adjustments to traffic flow result from the incident) at 8:00 am a ..

  Determine velocity after particle has traveled 10 meters

A particle has an initial speed of 27m/s. If it experiences a deceleration of (-6t)m/s^2, where t is in seconds, determine its velocity after it has traveled 10 meters. How much time does this take

  Find horsepower lost to friction between reservoir and jet

water from a reservoir is being supplied to a powerhouse that is located at an elevation 935 ft below that of the reservoir surface. Discharging through a nozzle, the water has a jet velocity of 240 fps and a jet diameter of 6 in.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd