All rivets are to be of the same size. load on the bracket

Assignment Help Mechanical Engineering

Reference no: EM13714109

The bracket plate is 25 mm thick. All rivets are to be of the same size. Load on the bracket, P = 50 kN ; rivet spacing, C = 100 mm; load arm, e = 400 mm. Permissible shear stress is 65 MPa and crushing stress is 120 MPa. Determine the size of the rivets to be used for the joint.

Reference no: EM13714109

Questions Cloud

Determine the power required to run the heat pump : A heat pump operating at steady state provides 36,000 kJ/hr to maintain the temperature in a building at 22C. The heat pump operates with a coefficient of performance 75% that of a reversible cycle operating between the same thermal reservoirs.

Determine the size of the rivets to be used for the joint : The bracket plate is 25 mm thick. All rivets are to be of the same size. Load on the bracket, P = 50 kN ; rivet spacing, C = 100 mm; load arm, e = 400 mm. Permissible shear stress is 65 MPa and crushing stress is 120 MPa. Determine the size of the ri..

Determine the volume of metal removed in an iron sheet : Determine the amount of energy (Joules) and the power (Watts) required drilling a hole of 0.2 (5.08 mm) inches in diameter in a Titanium sheet 0.2 (5.08 mm) inches thick. Determine the volume of metal removed in an iron sheet if the power required fo..

Isentropic ally through a convergent-divergent nozzle : Air at a stagnation pressure 700kPa flows isentropic ally through a convergent-divergent nozzle. The design pressure at the nozzle exit is 56 kPa. If the back pressure is raised gradually, thereby creating a shock in the divergent portion of the nozz..

All rivets are to be of the same size. load on the bracket : The bracket plate is 25 mm thick. All rivets are to be of the same size. Load on the bracket, P = 50 kN ; rivet spacing, C = 100 mm; load arm, e = 400 mm. Permissible shear stress is 65 MPa and crushing stress is 120 MPa. Determine the size of the ri..

Calculate the magnitude and phase by hand : For the following system, G(s) = (s + 50)/ (s + 5) Calculate the magnitude and phase by hand for w = 1, 5, 10, 20, 50, 100 rad/s. Sketch the Bode plot via asymptotes, and compare it to the values from (a).

Determine the amount of energy and the power : Determine the amount of energy (Joules) and the power (Watts) required drilling a hole of 0.2 (5.08 mm) inches in diameter in a Titanium sheet 0.2 (5.08 mm) inches thick.

Consider a friction less fluid with a density : Consider a frictionless fluid with a density of 65 lbm/ft3. We describe this fluid as:

Meteorologist is studying hurricanes and tornadoes : A meteorologist is studying hurricanes and tornadoes. She determines that a particular historic tornado can be described by phi7. At a distance 1 km from the eye of the tornado (the eye is at the origin of the coordinate system) the radial velocity i..

User Account

All Pages