A cylindrical soil sample 73 cm in diameter and 168 cm long

Assignment Help Civil Engineering
Reference no: EM13383450

A cylindrical soil sample, 7.3 cm in diameter and 16.8 cm long, is tested in a Constant Head Permeability Apparatus. A constant head of 75 cm is maintained during the test. After 1 min of testing, a total of 945.7 g of water was collected. The temperature was 200C, and the void ratio (e) of the soil was 0.43. Calculate the "Coefficient of Permeability" in "centimeters per second" (Given, k = (QL)÷(A Δh t)).

Reference no: EM13383450

Questions Cloud

Shown in the figure are a mast and a portion of the rigging : shown in the figure are a mast and a portion of the rigging of a schooner. members cd and ef lie in the same plane.
Design a silicon rectifier diode that will have a reverse : design a silicon rectifier diode that will have a reverse breakdown voltage of 250v and conduct a forward current of
After falling from rest from a height of 32 m a 045 kg ball : after falling from rest from a height of 32 m a 0.45 kg ball rebounds upward reaching a height of 22 m. if the contact
Assume a transducer with a thevenin unloaded voltage of : assume a transducer with a thevenin unloaded voltage of 5.0mv and a thevenin resistance of 20kilo ohms is connected
A cylindrical soil sample 73 cm in diameter and 168 cm long : a cylindrical soil sample 7.3 cm in diameter and 16.8 cm long is tested in a constant head permeability apparatus. a
Assume that the primary hdlc station in normal response : assume that the primary hdlc station in normal response mode has sent six i-frames to a sencondary station. the
A cylindrical specimen of a brass alloy 100 mm 039 in in : a cylindrical specimen of a brass alloy 10.0 mm 0.39 in. in diameter and 120.0 mm 4.72 in. long is pulled in tension
If a rod of brass 035 m long is heated from 150 to 850c : if a rod of brass 0.35 m long is heated from 150 to 850c while its ends are maintained rigid determine the type and
A ball is thrown with a velocity of 25ms at a building the : a ball is thrown with a velocity of 25ms at a building. the building is 20m high the man throwing the ball is 40m from

Reviews

Write a Review

Civil Engineering Questions & Answers

  Is crack width permissible assuming the exposure is dry air

Determine the estimated width of flexural cracks that will occur in the 8" (total depth) one-way slab shown in the figure below. Assume bottom clear cover is3/4". is the crack width permissible assuming the exposure is dry air

  Determine the moment of the l6-n force about point b

A foot valve for a pneumatic systemis hinged at B. Knowing that a=28degrees, determine the moment of the l6-N force about point B by resolving the force into horizontal and vertical components

  How much water do produce for the municipality per day

A municipal water plant has four filters that are each 20 ft long by 15 ft wide by 5 ft deep. The demand for water requires that they only operate, on average, three filters per day at a loading of 3 gallons per min / ft^2.

  How many rapid sand filters are needed for the plant

A water treatment plant is being designed for a flow of 1.6 m^3/s. How many rapid sand filters, using only sand as the medium, are needed for this plant if cross-sectional area of each filter is 10 m x 20 m

  What is the maximum distance away for the navigation lights

An offshore drilling rig is being towed out to sea. What is the maximum distance away that the navigation lights can still be seen by an observer standing at the shoreline

  Compare prismoidal volume to the corrected end area volume

Calculate the prismoidal correction and compare the prismoidal volume to the corrected end area volume. Station Left Center Right Area (sq. ft.) 1+00 C7.0/ C8.2/ C8.5/ 256.90 31.3 0.0 24.5 1+50 C5.3/ C5.0/ C3.5/ 207.62 29.5 0.0 21.8 2+00

  Determine the normal stress in the rails at a temperature

Determine the normal stress in the rails when the temperature reaches 48oC assuming that the rails (a) are welded to form a continuous track (b) are 10m long with 3 mm gaps between them.

  Determine annual volume of solid waste produce by source

the bailey stone works employs six people. assumming that the density of uncompacted waste is 480 kg/m^3, determine the annual volume of solid waste produce by the stone works assumming a waste generation rate of 1 kg/cap*d.

  What is the maximum grade the vehicle could ascend

A 2500-lb car (CD = 0.35, Af = 25 ft^2, and ? = 0.002378 slugs/ft^3) has 14-inch-radius wheels, a drivetrain efficiency of 90%, an overall gear reduction ratio of 3.2 to 1, and drive axle slippage of 3.5%.

  Determine what is the turbidity of the original sample

A wastewater sample was diluted by turbidity free water; 5ml was diluted to 250 ml. Turbidity of the diluted sample was 2.3 NTU, what is the turbidity of the original sample

  Determine the arrival rate assuming that it is unchanged

Determine the arrival rate assuming that it is unchanged over the duration of the observation period. An approach to a pretimed signal with a 60second cycle has nine vehicles in the queue at the beginning of the effective green.

  Determine the torque required to rotate the cylinder

A 25-mm-diameter shaft .5 m long is pulled through a cylindrical bearing. The lubricant that fills the 0.3-mm gap between the shaft and bearing is an oil having a kinematic viscosity of 8.0 × 10-4 m2/s and a specific gravity of 0.91.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd