What is the major head loss in a coarse concrete pipe with

Assignment Help Civil Engineering
Reference no: EM13560453

1.What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm

2.The power, P, required by an agitator in a tank is a function of the following variables, diameter of the agitator, D, Frequency of the impeller rotation, w (1/s), Viscosity of liquid, u (lbss/ft^2) and the density of the liquid ,p (slugs/ft^3) Determine the appopriate set of Pi terms.

Reference no: EM13560453

Questions Cloud

Find the rate of biological growth : Two identical complete-mix activated sludge units are connected in series; one-half of the sludge recycle flow rate, QR, is recycled to the primary effluent pipeline which handles a flow rate Q, and the other half is recycled to the effluent line fro..
Which alloy and in what condition whould you choose : For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender
For a concrete column that is part of a braced frame : For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender. Assume that at one end of the column a clockwise moment of 100 k-ft is present
Which cross section option will provide the highest flow : Two channel cross sections are proposed. Assume slope, cross sectional area, and surface type are constant for each channel. Which cross section option will provide the highest flow rate? Show calculations.
What is the major head loss in a coarse concrete pipe with : What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm
What is the major head loss in a coarse concrete pipe with : What is the major head loss in a coarse concrete pipe with a diamter of 1ft that is 100 ft long. Water flows at a rate of 20 ft^3/s (viscosity of water = 2.344x10^-5 lbfs/ft^2, density of water = 1.94 slugs/ft^3) 1inch = 25.4mm
Classify the column as slender or non slender : For a concrete column that is part of a braced frame, if the column is square, tied, 18 inches per side, 16 feet long, classify the column as slender or non slender
Calculate the hydraulic loading and the organic loading : A two-stage trickling filter plant treats 291.7 m3/h of municipal wastewater that has a BOD5 of 200 mg/L. The two filters have equal dimensions (depth = 1.68 m; diameter = 21.3 m), and each has a recycle ratio of 1.0. If the primary clarifier removes..
Does the cyclist need to produce to maintain a speed of 20 m : A bicyclist travels on a level path. The frontal area of the cyclist and the bicycle is 2.3 ft^2 and the drag coeffcient is 1.2. The specific weight of the air is .075lb/ft^3. How much horsepower (1hp=550ft*lb/s) does the cyclist need to produce to m..

Reviews

Write a Review

Civil Engineering Questions & Answers

  How many pounds of coal must be burned to keep one 100 watt

How many pounds of coal must be burned to keep one 100 watt light bulb lit for one hour? Assume efficiency of the power plant is 35%, the transmission losses are 10% fo the delivered poer, and the heating value of coal is 12,000 BTU/lb

  The plus sight and minus sight distances were kept approx

A differential leveling loop began and closed on BM bridge (elevation 103.895m). The plus sight and minus sight distances were kept approximately equal

  What is the static pressure of the water at the outlet

A PVC pipe has an inside diameter of 40 mm, is 30 m long and carries 10°C water at a rate of 3.5 m3/hr. At this rate, the friction factor of the pipe is 0.0814.

  Determine the total vertical stress the pore water pressure

A river 5 m deep flows over a sand deposit. The saturated unit weight of the sand is 18 kN/m^3 and the unit weight of water is 9.8 kN/m^3. At a depth of 5 m below the river bed:

  Force that cause stress-free

The rigid bar abcd is supported by a pin at B and restrained by identical steel bars at C and D, each of area 250mm 2 . if the temperature is increased by 8 0 C, find out the force P that will cause the bar at c to be stress-free.

  Determine what is the force in the wire and beam

The 5-m long cantilever beam using a W410 x 67 standard wide flange section has a distributed load of 1200 N/m placed on it. It is also supported by a cable at B, of length 2 m with a 7 mm2 cross sectional area. What is the force in the wire

  What will be the new exponent of the blasius equation

The relative roughness ofa pipe is 0.0005, if the blasius equation is applicable for Thecflow Reynolds number above 2700 rather then 3000

  What is the hydraulic radius of a rectangular channel

What is the Hydraulic Radius of a rectangular channel that has a bottom width of 5 feet and a flow depth is 3.5 feet. Assume the bed slope is 1.5%, and the Manning's roughness coefficient is 0.013.

  Compute the flexural strerangth if the load is fracture

A three point bending test is performed on a glss specimen having a rectangular cross section of hight d =6 mm and width b = 12 mm the distance between support points is 45mm.

  Give beam deflection solution

Beam Deflection Solution, Derive an expression for the deflection due to shear for a cantilever beam of constant rectangular cross section, under action of a point load, P at free end.

  Darcy law and quantity of groundwater

Using Darcy's Law, calculate the quantity of groundwater (L/day), the seepage velocity (m/s), and the contaminant loading (Kg/day) to the river (assuming no retardation) for the following scenario. Be sure to include both a plane view and cross-se..

  What is the step method for drawing raft foundation

A long line of burning agricultural waste emits 0.3 g/m/s of particulate matter on a clear fall afternoon with winds blowing 3 m/s perpendicular to the line. Estimate the ground-level particulate concentration 400 m downwind from the line.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd