Purchasing a new vehicle

Assignment Help Mechanical Engineering
Reference no: EM13859402

The code enforcement unit of a public safety department has two options for purchasing a new vehicle: a $23,000 four-cylinder sedan that averages 26 mpg or a $28,000 hybrid that averages 47 mpg. Assuming that gasoline will cost $4.00 per gallon, that the vehicle will be driven for 15,000 miles per year and will incur annual maintenance costs of $200, which vehicle should the unit purchase? Further assume the vehicle will be kept for five years with no salvage value and a discount rate of 5%. Does your recommendation change if the vehicle is kept for six years?

Reference no: EM13859402

Questions Cloud

In new york city in the late 1970s and early 1980s : In New York City in the late 1970s and early 1980s, parking meter collections averaged $1.75 million per month with a standard deviation of $302 thousand per month. Assume that the amount generated per month is Normal with the mean and standard devia..
What is the maximum allowable ampacity : What is the maximum allowable ampacity of a #2 AWG THHN copper conductor connected to a breaker having 60 C termimal ratings
Determine the estimated demand load in va : Determine the estimated demand load in VA and A @ 240 V for an office area containing 6300 sq ft of floor space and the following connected equipment:
Discuss how you will obtain the bode plot : A typical industrial robot has degrees of freedom. A unity feedback position control system for a force -sensing joint has the following transfer function. Discuss how you will obtain the Bode Plot for the above mentioned control system.
Purchasing a new vehicle : The code enforcement unit of a public safety department has two options for purchasing a new vehicle: a $23,000 four-cylinder sedan that averages 26 mpg or a $28,000 hybrid that averages 47 mpg
What is the necessity of forming voltage in rram : How to apply forming voltage and after that how to repeat it. What is the necessity of forming voltage in RRAM.
Whether to purchase new high-speed railcars or not : A public transit authority is evaluating whether to purchase new high-speed railcars from Siemens AG or General Electric. The Siemens AG cars cost $275,000 each, are expected to last ten years and have anticipated annual maintenance costs of $10,0..
Develop a coherently structured paper : Describe the history and status of the issue and provide an overview of the problem(s) that need to be addressed. This should be one or two (1-2) paragraphs.
The four-frame model of diagnosing change stems : The four-frame model of diagnosing change stems from the belief of its inventors that leaders in organizations must ?     A-understand that not everyone in an organization is ready to be asked to step up to the plate as a change agent.       B-review..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Explain what is the efficiency of the machine

Important information about Multipal choice question on mechanics, A machine is supplied energy at a rate of 4,000 W and does useful work at a rate of 3,760 W. What is the efficiency of the machine?

  What is the mass flow rate of the refrigerant in the cycle

A heat pump uses r134a as the refrigerant to keep a heated space at 20°c by pumping from a geothermal water source. Water from the geothermal source enters the evaporator (a heat exchanger) at 50°c and leaves at 40°c at a rate of 0.08 kg/s. The re..

  Yield strength for alloy that has average grain diameter

The yield strength for an alloy that has an average grain diameter of 4.4 x 10-2 mm is 115 MPa. At a grain diameter of 7.1 x 10-3 mm, the yield strength increases to 258 MPa. At what grain diameter, in mm, will the yield strength be 237 MPa?

  The cost of electricity is 10 cents per kwh what is the

a refrigerator consumes 280 w of electric power when it is running. the cost of electricity is 10 cents per kwh. what

  The acceleration of a particle is defined by the relation

the acceleration of a particle is defined by the relation a25-3x2 where a is expressed in ms2 and x in meters. the

  Based of thermodynamic considerations does this system work

one of your classmates claims to have invented a flow device to increase the superheat of steam. his claim is that he

  Find the force required to pull the block assume the

a block weighing 10 lbf and having dimensions 10 in. on each edge is pulled up an inclined surface on which there is a

  What is the secondary side voltage and current

A single phase step up transformer is used to transform 240VRMS to 2400VRMS. The transformer is operating at its rated power of 1kW (with purely resistive load), with transformer Reqp = 5, and a Xeqp = 4j, ignore the magnetising branch.

  A 132 kg axial load is uniformly carried by an aluminum

a 13.2 kg axial load is uniformly carried by an aluminum pipe with an outside diameter of 10.0000 cm and an inside

  The clearance between the members is 14 in determine the

two wooden members shown which support a 3.6 kip load are joined by plywood splices fully glued on the surfaces in

  Mixture-averaged mass specific gibbs free energy of mixture

Using the thermodata computed from the matlab functions to compute the mixture-averaged mass specific Gibbs free energy of the final mixture, as a function of the progress variable (normalized as: 0 for no dissociation, and 1 for complete dissociatio..

  The boxs surface is the 12x36 side and the 2x2 surface is

a 12x36 and 9 high empty prism composed of a material with an elastic modulus of 345000 psi 9000 psi yield stress the

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd