Is inventor claim valid to have an invented adiabatic flow

Assignment Help Civil Engineering
Reference no: EM13321464

An inventor claims to have invented an adiabatic steady-flow device with a single inlet-outlet that produces 100 kW when expanding 1 kg/s of air from 900 kPa and 300 degrees C to 100 kPa. Is this claim valid?

Reference no: EM13321464

Questions Cloud

Determine what is the effective theoretical detention time : Determine the surface area of a primary settling tank sized to be handle a maximum hourly flow of 0.570 m3/s at an overflow rate of 60 m/day.If the effective tank depth is 3.0 m
Do you think bridget and erin have the same preferences : With food on the horizontal axis and clothing on the vertical axis, identify on a graph the set of points that give Bridget the same level of utility as the bundle (10,5). Do the same for Erin on a separate graph.
Estimate the steady state concentration in the airshed : Consider a box model for an air shed over a city that is 1 X 105 m on a side, with a height of 1200 m induced by a temperature inversion. Winds with no SO2 blow at 4 m/s agains one side of the box.
Janelle does not care at all about styling and wants : If Jane is currently willing to trade 4 movie tickets for 1 basketball ticket, then she must like basketball better than movies. True or false? Explain.
Is inventor claim valid to have an invented adiabatic flow : An inventor claims to have invented an adiabatic steady-flow device with a single inlet-outlet that produces 100 kW when expanding 1 kg/s of air from 900 kPa and 300 degrees C to 100 kPa.
Discuss why and how preferences might change over time : Consumer preferences for various commodities did not change during the analysis. In some situations, however, preferences do change as consumption occurs.
What is the difference between ordinal utility and cardinal : What is the difference between ordinal utility and cardinal utility? Explain why the assumption of cardinal utility is not needed in order to rank consumer choices.
Determine the horizontal and vertical components at pin c : the jib crane is supported by a pin at c and a rod at ab if the load has a mass of 2Mg with its com located at g determine the horizontal and vertical components of the reaction at the pin c
Calculate the position of the image formed by the lens : A small object is placed to the left of a convex lens and on the optical axis. What is the position of the image formed by the lens

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the linear interpolation function of displacement

Consider a 2D triangular element with the three vertices at 1[1,1], 2[1,2] and 3[2,2]. the displacements at these t hree points are [0.1,0.1], [0.3,0.2] and [0.4, 0.3] mm for point 1,2,and 3 respectively

  Determine the nominal flextural strength of the section

a rectangular beam with a width of a 8 in. an effective depth of 10 in., and a total depth of 12 in., is reinforced with a single fiberglass reinforcing bar that has a cross sectional area of 0.45 in^2.

  Determine the produce of inertia for the shaded area

Determine the produce of Inertia, Ixy, for the shaded area to the right using integration. Use the parallel axis theorem to find Ibarxy, the product of inertia with respect to the centroidal axes.

  Convert the formula so that q is in gallons per minute

The flow of water over a weir, can be computed by Q=5.35LH^(3/2), where Q is the volume low rate of water in cubic feet per second, L is the length of weir in feet, and H is the height of water over the weir in feet.

  Queue problem of vehicles

There are 10 vehicles in a queue when an attendant opens a toll booth. Vehicles arrive at the booth at a rate of 4 per minute. The attendant opens the booth and improves the service rate over time following the function u(t) = 1.1 + .30t, where u(..

  Determine the relative humidity using psychrometric chart

The wet bulb and dry bulb temperatures for humid atmospheric air (at 100 kPa) are measured to be 20 C and 25C respectively. Determine: a. using the psychrometric chart, the relative humidity  b. using the psychrometric chart, the humidity ratio

  Design a column base plate

Design a column base plate for a W10 x 33 column supporting a service dead load of 20 kips and a service live load of 50 kips. The column is supported by a 12-inch x 12-inch concrete pier. Use A36 steel and f 'c = 3 ksi. Answer 12 x 12 x 5/8

  What was the shear stress on the failure plane at failure

At a confining pressure of 2000 psi, the first sample failed at 9000 psi. Then at a confining pressure of 5000 psi, the other sample failed at 21000 psi. (a) plot the 2 test results on a shear stress-nomal stress diagram and draw in the Mohr envel..

  How many days will contractor require to complete the work

A contractor has both a 3-cy and a 5-cy shovel in the equipment fleet. Select the minimum-size shovel that will excavate 400,000 bcy of common earth in a minimum of 130 working days of 8 hr each.

  Compute the horizontal and vertical forces on curved panel

the contractor ran out of gunite mixture and finished the deep corner of a 5-m-wide swimming pool, with a quarter circle pipe of PVC pipe. compute the horizontal and vertical forces on the curved panel AB.

  What would be the void ratio of the clay at the point

At a point in a saturated normally consolidated clay layer the soil is subject to an in-situ vertical effective stress of 50kPa. The soil at the point has a moisture content of 44% and a compression index of 0.45.

  What will the lowest dissolved oxygen concentration

A wastewater is discharged to a stream with a reoxygenation constant of 0.5 day-1 and a velocity of 1 m/sec. The oxygen saturation concentration in the stream is 11 mg/L.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd