Determine the relative humidity using psychrometric chart

Assignment Help Civil Engineering
Reference no: EM13306361

The wet bulb and dry bulb temperatures for humid atmospheric air (at 100 kPa) are measured to be 20 C and 25C respectively. Determine:
a. using the psychrometric chart, the relative humidity
b. using the psychrometric chart, the humidity ratio
c. the partial pressure of the water vapor in the air
d. the dew point temperature

Reference no: EM13306361

Questions Cloud

Write java program that allows the user to enter wall space : Write a Java program (from scratch) that allows the user to enter the wall space to be painted and the price of paint per gallon.
Covert these equipment designs to normal lab apparatus : Covert these equipment designs to normal lab apparatus - But please draw them beautifully use software.
Determine the minimum uncertainty in the blocks speed : A 0.50 kg block rests on the icy surface of a frozen pond, which you can assume to be frictionless. what is the minimum uncertainty in the block's speed
Create the needed constructors : In this assignment you will be implementing three classes -Date (you would reuse the Date class after implementing toString() and equals() method), Employee and EmployeeTest with main method to test Employee class.
Determine the relative humidity using psychrometric chart : The wet bulb and dry bulb temperatures for humid atmospheric air (at 100 kPa) are measured to be 20 C and 25C respectively. Determine: a. using the psychrometric chart, the relative humidity  b. using the psychrometric chart, the humidity ratio
Prioritise the stakeholders on a project : Question 1.Why is it important to prioritise the stakeholders on a project?
Find the constraint force : A mass m slides in the bottom of a hemispherical bowl of radius R under the influence of gravity. Find the constraint force
Determine what is the adiabatic efficiency of the turbine : At the inlet the steam is at 1 MPa and 320 C, and leaves the turbine at 20 kPa. The work output of the turbine is measured to be 600 kJ/kg (of steam passing through the turbine).
What is the minimum nonzero thickness of the film : A piece of glass has a thin film of gasoline floating on it. A beam of light is shining perpendicular on the film. what is the minimum nonzero thickness of the film

Reviews

Write a Review

Civil Engineering Questions & Answers

  Describe how shear stress due to the applied torque varies

A hollow circular shaft is loaded in pure torsion. Describe how the shear stress due to the applied torque varies on a cross section whose unit normal vector lies parallel to the long axis of the shaft.

  Determine the elevation of the lowest point of the curve

A 400ft equal-tangent sag vertical curve has its PVC at station 200 + 00 and elevation 250ft. The initial grade is -5.0% and the final grade is +2.5%. Determine the elevation of the lowest point of the curve.

  Determine what percent of the hocl is dissociated

A solution of HOCl is prepared in water by adding 15 mg HOCl to a volumetric flask, and adding water to the 1.0 L mark. The final pH is measured to be 7.0. What are the concentrations of HOCl and OCl

  Design a single angle strut connected to a gusset plate

Design a single angle strut connected to a gusset plate to carry 180k n factored load. The length of the strut between center to center intersection is 3m.

  Determine the position of the race car

Starting from x = 0 with no initial velocity, the acceleration of a race car is defined by the relation a = 6.8e-0.00057x, where a and x are expressed in m/s2 and meters, respectively. Determine the position of the race car when v = 30 m/s.

  Behaviour of structural material using comparative statement

The behaviour of structural materials using comparative statement when they are formed into structural member

  What error in pressure drop would ensue if assumptions made

horizontal pipe, and the fanning friction factor is f_F = 0.0060. what error in the pressure drop would ensue if the assumption were made that the flow was laminar, abandoning the previous value of the friction factor.

  Determine the acceleration of each plate with a force

The coefficients of static and kinetic friction are 0.3 and 0.2, respectively, between each of the plates and between plate A and the ground. Determine the acceleration of each plate.

  Determine what is the minimum do in the river

A stream is in equilibrium with atmospheric oxygen upstream of a waste outfall. The waste outfall creates a BODo of 20 mg/L in the stream. The k(BOD) is 0.4 /day and the k(o2) is 1.4 / day. The stream temperature is 15 degrees Celsius.

  Calculating the relative compaction of a dam project

A dam project specifies 97% compaction. Lab tests on the soil being used indicate that it has a maximum dry density of 1900 kg/m 3 at an optimum water content of 13.2%.

  Determine the critical load of a round wooden dowel

Determine the critical load of a round wooden dowel that is 0.9m long and has a diameter of (a) 10mm (b) 15mm. Use E=12GPa

  Determine the velocity and thermal boundary layer thickness

Engine Oil at 60 degrees C flows over a 3m long and 2m wide plate whose temperature is maintained at 20 degrees C with a velocity of 2 m/s. Determine the rate of heat transfer from the entire plate.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd