What would be the void ratio of the clay at the point

Assignment Help Civil Engineering
Reference no: EM13310277

At a point in a saturated normally consolidated clay layer the soil is subject to an in-situ vertical effective stress of 50kPa. The soil at the point has a moisture content of 44% and a compression index of 0.45. The effective stress at the point is to be rapidly increased to 120kPa.

a) What would be the void ratio of the clay at the point immediately after increasing the stress?

b) What would be the void ratio at the point a long time after increasing the stress?

Reference no: EM13310277

Questions Cloud

Determine the compression index of the clay : A layer of normally consolidated clay has been filled with 2m of gravel at a unit weight of 17kN/m3 for a long period of time and the settlement of the clay layer monitored giving a total final settlement of 330mm.
How tall is the column of gas that is supporting the piston : A vertical cylindrical tank contains 1.80 mol of an ideal gas under a pressure of 1.00 atm at 20.0oC. how tall is the column of gas that is supporting the piston
Explain expansion process may be assumed to be isenthalpic : Wet steam flows in a pipe at a pressure of 700 kPa. To check the steam quality, the wet steam is expanded to pressure of 100 kPa. The expansion process may be assumed to be isenthalpic
Compute the heat that must be supplied to carry out : Ten kg of steam at 500 bar is expanded at constant pressure until its pressure increases to seven times its initial value of 0.01 m^3. (a) Determine the initial and final temperature of the steam. (b) Calculate the heat that must be supplied to ca..
What would be the void ratio of the clay at the point : At a point in a saturated normally consolidated clay layer the soil is subject to an in-situ vertical effective stress of 50kPa. The soil at the point has a moisture content of 44% and a compression index of 0.45.
What would be the power dissipated by the lamp : Bob connects a lamp of 34 Ohms resistance across a car battery of 12 volts. what would be the power dissipated by the lamp
The alkenes can be converted into alcohols by acid-catalyzed : Alkenes can be converted into alcohols by acid-catalyzed addition of water. Assuming that Markovnikov's rule is valid, predict the major alcohol product from 2-methylbut-2-ene
With what initial velocity must he have thrown the ball : Billy throws a ball straight up and it rises 22 meters into the sky. With what initial velocity must he have thrown the ball
Explain how many hydrogens are in c13h?n : How many hydrogens are in C6H?NO3, which has 1 ring and 4 double bonds? How many hydrogens are in C13H?N, which has 4 rings and 6 double bonds?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the values of s and z and the shape factor

Determine the values of S and Z and the shape factor about the horizontal x axes. Use the web and flange dimensions given in the AISC Manual for making these calculations.

  Determine at which of the two points the elevation is higher

At point 2, the velocity and pressure are 14 ft/s and 23 psi. Determine at which of these two points the elevation is higher. Calculate the height difference. (Assume the sp ecific gravity of butane is 0.6 and that the butane is at a temperature o..

  Find the force ratio equation

How do you find the force ratio equation to determine the maximum total load that can be applied to a truss?

  Magnitude of force to produce pure shear in cylindrical wall

A thin-walled cylindrical tank of radius r is subjected simultaneously to internal pressure p and a compressive force P through rigid end plates. Determine the magnitude of force P to produce pure shear in the cylindrical wall.

  Determine ft and fn

for this purpose replace this force by its equivalent of two forces at At Ft parallel and Fn perpendicular to the beam. Determine Ft and Fn.

  Determine the magnitude of force p acting on the crate

If the 50-kg crate starts from rest and travels a distance of 6m up the palne in 4s, determine the magnitude of force P acting on the crate. The coefficient of kinetic friction between the crate and the ground is \mu_k=.25

  Compute the shear modulus for the aluminum

The elastic portion of the tension stress-strain diagram for an aluminum alloy. The specimen used for the test has a gauge length of 2 in and a diameter of 0.5 in. When the applied load is 9 kips, the new diameter of the specimen is 0.49935 in.

  Determine which method of extraction should be used

Ocean water contains 0.9 ounce of gold per ton. Method A costs $220 per ton of water processed and will recover 85% of the metal. Method B costs $160 per ton of water processed and will recover e of the metal.

  Determine economical number of trucks and direct cost

A project involves transporting iron pipe to a jobsite that is 43 miles from the supplier. The pipe will be hauled in trucks that can carry 16 pipes per load. Each pipe is 20 ft in length. The average haul speed of a truck will be 50 mi./hr and re..

  Determine the dead load per unit of length on a beam

A floor system consists of wide flange steel beams (W18 x 60) equally spaced at 8ft center to center. A 6inch reinforced concrete slab spans between beams. The bottom of the slab is coated with plaster and the top of the slab has ¾inch hardwood fl..

  Find the conductive heat loss through the furnace wall

Assuming unit surface area, find the conductive heat loss through the furnace wall and the temperature at the interface of the fire clay and red brick.

  Calculating largest tolerable internal crack length

Calculate the largest tolerable internal crack length for a 7075-T651 aluminum alloy component that is loaded to a stress one-half of its yield strength without catastrophic fracture.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd