Compute the magnitudes of the normal stresses

Assignment Help Civil Engineering
Reference no: EM13561448

The parameter K in Equations 9.7a, 9.7b, and 9.7c is a function of the applied nominal stress (sigma) and crack length (a) as K=sigma(sqrt(pi*a).

Compute the magnitudes of the normal stresses (sigma,x) and (sigma,y) in front of a surface crack of length 2.0 mm in response to a nominal tensile stress of 100 MPa at the following positions:

a) r= 0.1mm, theta= 0?

b) r= 0.1mm, theta= 45?

c) r= 0.5mm, theta= 0?

d) r= 0.5mm, theta= 45?

Reference no: EM13561448

Questions Cloud

Compute what buoyant force acts on the object : A spring has a spring constant of 578N/m. When used tosuspend an object in the air, the spring stretches by0.0640m. What buoyant force acts on the object
Compute the rate of return and express the answer : An investor buys 50 of these bonds at face value, and keeps them for the full 10 years.  Compute the rate of return and express the answer to the nearest 0.01%.
Solve to find volume and diameter : Your home town is growing so rapidly that another water tower is necessary to meet the needs of the community. Civil and environmental engineers predict that the water tower will need to hold 1.00 X 10.0^6 kilograms of water.
Calculate what is the mass of the second ball : A ball of mass m makes a head-on elastic collision with asecond ball (at rest) and rebounds with a speed equal toone-fifth its original speed. What is the mass of the second ball
Compute the magnitudes of the normal stresses : Compute the magnitudes of the normal stresses (sigma,x) and (sigma,y) in front of a surface crack of length 2.0 mm in response to a nominal tensile stress of 100 MPa at the following positions:
Calculate what was the muzzle speed of the bullet : A 25 g bullet strikes and becomes embedded in a 1.35 kg block of wood placed on a horizontalsurface just in front of the gun. what was the muzzle speed of the bullet
How was the amount in cell e22 determined : Assume the data above was a pre-tax cash flow what would be the effect on the cash flow data ONLY as a result of the depreciation only: if you were allowed to use the SL depreciation method for 50 years?
Study of african-american literature : In the study of African-American literature, why is it important to pay close attention to the vernacular tradition of spirituals, songs, and folktales?
What is a trajectory diagram : A Carnot heat engine is supplied with a high temperature heat source at a rate of 200 kW. If the power output of the heat engine is 120 kW, determine the required source temperature if the heat sink temperature is 20 °C.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the time needed for the particles to set

For a temperature of 10 degree C, calculate the time needed for the following particles to settle 0.3m: a) a 20um mineral particle with a specific gravity of 2.1, and b) a 2 um organic particle with a specific gravity of 1.2

  Determine how much the boiling temperatures of water

As the weather forecasters frequently state, the atmospheric pressure drops during stormy weather and it rises during clear and sunny days.

  Determine the actual field weight required to mix a 4 bag

Determine the actual field weight required to mix a 4 bag mix using the mix proportions given below. The excess moisture contet of the sand is 6% and that of the gravel is 2% Component Weight ..

  Determine what is the acceleration of diatomic oxygen gas

2 kilomoles of diatomic oxygen gas are enclosed in a 10-kg steel container. A force of 2kN now accelerates this system. What is the acceleration

  Tackling the problem of making tunnel

You are a Project Manager on site where work for 3K.m. long Tunnel has been undertaken. The site is remote and takes about 2 days travel to nearest town. Supervisors, Technicians & Skilled Workers are engaged in dangerous / hazardous work.

  What is the diameter of the hole in the aluminum plate

A hole is drilled in an aluminum plate with a steel drill bit whose diameter is 6.245 cm at 20 degrees Celsius. In the process of drilling, the temperatures of the drill bit and plate rise to 168 degrees Celsius.

  What percentage of water evaporate during throttling process

Saturated liquid water at 1.0 MPa is throttled adiabatically to a pressure of 0.4 MPa. If the change is kinetic energy is negligible, what percentage of the water evaporates during this throttling process

  Determine the normal depth and the froude number for q

A trapezoidal channel lined with d50 = 10 cm has a bottom width of b = 1.2 m, side slopes of m = 3, and a longitudinal bottom slope of S0 = 0.008. Determine the normal depth and the Froude number for Q = 1.4 m3/s.

  Determine deviation at the top of trajectory caused by wind

A fireworks shell is launched vertically from point A with speed sufficient to reach a maximum altitude of 500ft. A steady horizontal wind causes a constant horizontal acceleration of 0.5ft/sec^2, but does not affect the vertical motion.

  Calculate the hardness of lime water as mg per l as caco3

38 mL of 0.02 N HCl is added to neutralize 50.0 mL of lime water (Ca(OH)2). Calculate the hardness of lime water as mg/L as CaCO3 and mg/L as Ca(OH)2.

  Determine the intensity of w1 and w2 for the resultant force

The post is embedded into a concrete footing so that it is fixed supported. If the reaction of the concrete on the post can be approximated by the distributed loading, determine the intensity of w1 and w2

  Explain how these effects were initiated

Is it possible (in this part of the world) for the sun to ever shine directly upon the OUTSIDE of a NORTH-facing wall of a home or other building? If so when?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd