Calculate the hardness of lime water as mg per l as caco3

Assignment Help Civil Engineering
Reference no: EM13305108

38 mL of 0.02 N HCl is added to neutralize 50.0 mL of lime water (Ca(OH)2). Calculate the hardness of lime water as mg/L as CaCO3 and mg/L as Ca(OH)2.

Reference no: EM13305108

Questions Cloud

How much heat in kj is exchanged during each of processes : One kilogram of air (which behaves as an ideal gas) in a piston-­cylinder assembly is subjected to two separate processes from the same initial to the same final state: at the initial state the air has a volume of 1,000 L, a pressure of 10^5 N/m2,
Determine the minimum do concentration in the stream : A municipal WWTP discharges 22.5 MGD of secondary effluent containing 45 mg/L of ultimate BOD at 26.7 C with 1.3 mg/L of dissovled oxygen. The stream flow is 237 ft^3/s at an average velocity of 2.1 ft/s and an average depth of 7ft.
Calculate valuation for the estate total holdings of stock : Additionally, the total return on the stock is evenly divided between capital gains yield and a dividend yield. If the company's policy is to always maintain a constant growth rate in its dividend, what is the current dividend per share?
Calculate carbonate-noncarbonate and total hardness : Calculate carbonate, noncarbonate, and total hardness Na+ = 27.8 mg/L Cl- = 35.6 mg/L Ca+2 = 48mg/L CO3-2 = 30 mg/L Mg+2 = 12mg/L HCO3- = 61 mg/L K+ = 12 mg/L SO4-2 = 48 mg/L
Calculate the hardness of lime water as mg per l as caco3 : 38 mL of 0.02 N HCl is added to neutralize 50.0 mL of lime water (Ca(OH)2). Calculate the hardness of lime water as mg/L as CaCO3 and mg/L as Ca(OH)2.
Cybersecurity research paper : Identifying and explaining how the breach occurred and identifying and discussing known or suspected losses of confidentiality, integrity, and availability for information and/or information systems
Obtain the sound intensity level : A loud speaker is playing rock music. Consider the sound from it as a spherical wave. what is the sound intensity level
Determine the initial and final sound intensities : Suppose that the sound level of a conversation is initially at an angry 72 dB and then drops to a soothing 50 dB. determine the initial and final sound intensities
Determine the moment of the forces around point a : The frame ACD is hinged at A and D and is supported by a cable that passes through a ring at B and is attached to hooks at G and H. If the tension in the cable is 1125 N (thus 1125 N in section BG and 1125 N in section BH)

Reviews

Write a Review

Civil Engineering Questions & Answers

  At what temperature change delta t does the wire go slack

a brass wire of diameter d=1/6 in is stretched between rigid supports with an initial tension T of 37lb. assume the coefficient of thermal expansion is 10.6X10^-6 / F and the modulus of elasticity is 15X10^6 psi.

  Define mechanical engineering dynamics

Important information about Mechanical engineering dynamics, A 3000 lb car rests on a horizontal street out of gas with its brakes locked.

  Calculate the maximum rod diameter

If the tensil testing machine can apply no more than 925 lbs. of force to the specimen, calculate the maximum rod diameter that should be used. (precision 0.000)?

  Calculate the total axial deformation in the aluminum rods

A rigid rectangular shelf is suspended from a rigid ceiling by mean of four rods of diameter .505 inches. The two rods to the left L1 and L2, are made of steel. The two rods to the right R1 and R2 are made of aluminum.

  Calculate the ifov corresponding to the spatial resolution

LANDSAT as a spatial resolution of 15m and an altitude of 700km. IKONOS has a spatial resolution of 1m and an altitude of 680km. Calculate the IFOV corresponding to the spatial resolution for sensor.

  Determine the exit velocity and the ratio of the exit area

Air (an ideal gas) enters an adiabatic nozzle at 3 bar and 38 C and exits at 1 bar and -0.78 C. The process is steady. If the velocity at the inlet is 1 m/s, determine the exit velocity and the ratio of the exit area to the inlet area.

  Write mass balance equation for an ideal 1d plug-flow stream

Assume the rate constant for BOD decay is 0.2 d^-1, the mean velocity of the stream is 0.5 m s^-1, and the initial concentration is 100 mg L^-1 at x=0. Plot the resulting concentration with downstream distance x in km.

  What is the ratio of the magnitude of e2 to the magnitude

What is the ratio of the magnitude of E2 to the magnitude of E1? You may neglect the effects of gravity on the proton.

  Determine the velocity v2 of the particle

The motion occurs in the horizontal x-y plane. Determine the velocity V2 of the particle at the end of the 3-s interval.

  Determine the amount of oil and money saved per year

The maximum flow rate of a standard shower head is about 3.5 gpm and can be reduced to 2.75 gpm by switching to a low-flow shower head that is equipped with flow controllers. Consider a fam- ily of four, with each person taking a 6-minute shower e..

  Find difference in mercury levels inside and outside tube

A glass tube with inside diameter of 2-mm is inserted vertically into a dish of mercury at 20°C. Determine the difference in mercury levels inside and outside the tube.

  Determine how much soil must be removed from the site

The minimum safe side slope for an excavation in a certain type of soil is 3 horizontal to 1 vertical. If a foundation excavation must be 40 ft wide x 60 ft long x 20 ft deep, How much soil must be removed from the site

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd