Explain properties and application of aluminium, Electrical Engineering

Assignment Help:

Explain properties and application of Aluminium.

Properties of Aluminium:

1) Pure aluminium in colour is silver white.

2) Aluminium is a ductile metal and can be put to a shape by drawing, forging and rolling.

3) Aluminium melts at 6550C.

4) Aluminium is resistant to corrosion.

5) Its tensile strength is 60MN/m2.

6) Aluminium can be alloyed with the other elements.

7) Annealing can soften Aluminium.

8) Aluminium has a higher thermal conductivity.

Applications of Aluminium:

It is widely used as conductor for power transmission and distribution. Aluminium is used busbars, in overhead transmission lines and ACSR conductors.


Related Discussions:- Explain properties and application of aluminium

Compute the total capacitance with parallel connection, Compute the total c...

Compute the total capacitance with parallel connection: Three capacitors C 1 , C 2 and C 3 contain capacitance 20 μf, 15 μf, 30 μf, respectively. compute: 1. Charge on ea

Explain from the drain characteristics, Q. Explain from the drain character...

Q. Explain from the drain characteristics that a JFET has  infinite resistance? When V GS = 0v when a positive voltage Vds has been applied across the channel and the gate

Carrying out repairs on lt and ht switch gear, Precautions to be taken in c...

Precautions to be taken in carrying out repairs on HT and LT switch gear? Ans: The following precautions to be taken in carrying out repairs on LT and HT switch gears. a

Electrical and electronic principles, 12. A capacitor is to be constructed ...

12. A capacitor is to be constructed so that its capacitance is 0.2µF and to take a p.d. of 1.25kV across its terminals. The dielectric is to be mica which, after allowing a safety

Benefits of digital systems, Q. Show Benefits of digital systems? Ever ...

Q. Show Benefits of digital systems? Ever since most digital systems have only two possible states, there is high degree of accuracy in the transmission of data. With an analog

Explain charge-to-charge amplifier, Q. Explain Charge-to-Charge Amplifier ...

Q. Explain Charge-to-Charge Amplifier A circuit is shown in Figure in which there is a capacitor C1 in the - input line and a capacitor Cf in the feedback loop. KCL at node X g

Determine the value of the capacitance in single phase, Q. Three loads in p...

Q. Three loads in parallel are supplied by a single phase 400-V, 60-Hz supply: Load A: 10 kVA at 0.8 leading power factor Load B: 15 kW at 0.6 lagging power factor Load C:

Determine the actual attenuation , (a) Design a passive high pass filter th...

(a) Design a passive high pass filter that has a maximally flat response with a 50  Ω resistive load. Assume that the cut-off frequency is 40 kHz and that at a frequency of 25 kHz,

Multiplexer, design a 32:1 multiplexer using two 16:1 multiplexer

design a 32:1 multiplexer using two 16:1 multiplexer

Differentiate between an integrator and differentiator, Q . Differentiate b...

Q . Differentiate between an integrator and differentiator? Integrators 1 Integrators are circuits in which output voltage is proportional to the integral of the input.

Write Your Message!

Captcha
Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd