Calculate change in internal energy of the gas, Mechanical Engineering

Assignment Help:

(a) Illustrate First Law of Thermodynamics for a Closed System undergoing a change of state and show that ‘Energy' is a property of the system.

(b) A cylinder contains 1 m3 of a gas at 100 KPa and 100oC. The gas is compressed to a volume of 0.25m3, the final pressure being 600 KPa.

Calculate :

(i) Change in internal energy of the gas.

(ii) The heat transfer by the gas during compression.

Consider γ = .14 and R = 0.287 KJ/Kg


Related Discussions:- Calculate change in internal energy of the gas

When was pddi developed, When was PDDI developed The PDDI interface was...

When was PDDI developed The PDDI interface was developed in connection with the ICAM project which was funded by the Air Force in order to improve the manufacturing methods in

Calculate the tension t in the rope, Calculate the tension T in the rope: ...

Calculate the tension T in the rope: Q: A man raises 10 Kg joist of length 4m by pulling on rope, Find out the tension T in the rope and reaction at point A for the posit

Find out the common velocity, Find out their common velocity: An aerop...

Find out their common velocity: An aeroplane weighing 40 kN horizontally moves with a velocity of 20 m/sec (72 kmph, that means 72 km per hour). A helicopter of weight 20 kN i

Types of lubricant , Types of Lubricant: Lubricant is a material which cir...

Types of Lubricant: Lubricant is a material which circulates through the lubrication network to provide lubrication at various points. Lubricants are classified in three forms: Fl

Piston rings-basic components of engine , Piston Rings: Piston rings (Fig...

Piston Rings: Piston rings (Figure), fitted into the grooves around the piston, provide a tight sealing effect between the piston and the cylinder wall thus preventing leakage of

Describe span of bridge and varying depth, The press tressed bridge structu...

The press tressed bridge structure would look like as shown below,   The following factors influences the decision to select the particular prestressing, 1/Span of br

Laminar flow, Consider fully developed laminar flow with constant propertie...

Consider fully developed laminar flow with constant properties in a circular tube. Let there be heat transfered  to or from  the fluid at a constant rate per unit of tube length.Ad

Alignment of a railway line - railways, Alignment of a Railway Line: ...

Alignment of a Railway Line: Selection of Alignment The following points must be considered in selecting the alignment of a railway line : (a) It should be as direct

Extrusion, Difference between hot extrusion and cold extrusion

Difference between hot extrusion and cold extrusion

Describe polythionic acid corrosion, Q. Describe Polythionic Acid Corrosion...

Q. Describe Polythionic Acid Corrosion? Although it is not typically thought of as high temperature corrosion, polythionic acid stress corrosion cracking occurs in areas where

Write Your Message!

Captcha
Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd