Would calcite be over or under-saturated in hot water heater

Assignment Help Civil Engineering
Reference no: EM13300176

If log KSO, calcite (CaCO3(s)) = -8.61 at 50 oC, would calcite be over- or under- saturated in a hot water heater at 50 oC if the water was in equilibrium with calcite at 25 oC (log KSO = -8.30) when it entered the house?

Reference no: EM13300176

Questions Cloud

Calculate concentration of dnapl in the water as function : If clean groundwater flows through an aquifer contaminated with a dense non- aqueous phase liquid (DNAPL), calculate the concentration of DNAPL in the water as a function of time if the DNAPL is dissolving into the water at a rate of k1
How can managers improve their perceptual skills : How can managers improve their perceptual skills?
Explain the concentrations of both no2 and n2o4 : Consider the reversible reaction: 2NO2(g) N2O4(g). If the concentrations of both NO2 and N2O4 are 0.016 mol L-1, what is the value of Qc
What must be the diameter of the aperture of the camera : Rumor has it that a photographic camera on a spy satellite can read the license plate of an automobile on the ground. what must be the diameter of the aperture of the camera
Would calcite be over or under-saturated in hot water heater : If log KSO, calcite (CaCO3(s)) = -8.61 at 50 oC, would calcite be over- or under- saturated in a hot water heater at 50 oC if the water was in equilibrium with calcite at 25 oC (log KSO = -8.30) when it entered the house
How much was the mutual fund worth after 9 year : When the CD matured she invested the full amount in a mutual fund that had an annual growth equivalent to 18% compounded annually. How much was the mutual fund worth after 9 year?
Explain added five drops of disodium hydrogen phosphate : What would happen to the A450 value for a smaple which include : 1mL of 0.0025M Fe(NO3)3 + 1mL of 0.0025M KSCN + 5.0mL of 0.1M HNO3 if you accidentally added 5 drops of disodium hydrogen phosphate
Are each of these expenditures classified as for agi : Do the tax consequences change if Marilyn's assignment is for a period of more than one year and is for an indefinite period rather than a temporary period?
What is good customer service : What is good customer service? Explain in detail

Reviews

Write a Review

Civil Engineering Questions & Answers

  Problem of coefficient of static friction

The machine part ABC is supported by a frictionless hinge at B and a wedge at C. Knowing that the coefficient of static friction is 0.20 at both surfaces of the wedge, determine:

  Design the ramp for the highest horizontal curve

The entrance to Mt. Hood Meadows (elevation 3,075 ft at the point of crossing) is grade separated from Viking highway (elevation 3,050 ft at the point of crossing) and will have to be connected. The two roadways intersect at a right angle.

  What is the average velocity

hydrogen is flowing in a 50 mm diameter pipe at a mass rate of 0.01 kg/s. at section 1 the pressure is 280 kPa abs and t= 25 . what is the average velocity?

  Determine direction of ground water flow through triangle

The depth to water in A is 210 ft, in B is300 ft, and C is 230 ft. Determine the direction of ground water flow through the triangle ABC and calculate the hydraulic gradient. If the aquifer hydraulic conductivity is 30 ft/day, estimate how far gro..

  Force required to hold the pipe

A 0.3-m diameter pipeline terminates in a nozzle of outlet diameter = 0.15 m. When water flows through this pipe at a rate of 0.25 m3/s, the force required to hold the pipe (N) is most nearly.

  Determine probabilities of different events of flood wall

A temporary flood wall has been constructed to protect several homes in the floodplain. the wall was built to withstand any discharge up to the 20-year period after all the homes have been relocated.

  Determine liquid detention time-loading rate and fm ration

Determine the liquid detention time, loading rate, F/M ration (with an MLSS of 2350 mg/l), sludge age (with 5330 lb/day waste sludge Eff. SS= 20 mg/l. Will the sludge settle properly

  Describe electron and hole motions in a p-n junction

Briefly describe electron and hole motions in a p-n junction for forward and reverse biases;

  What must be the standard deviation

A distance of 200 ft must be taped in a manner to ensure a standard deviation smaller than ± 0.03 ft. What must be the standard deviation per 100 ft tape length to achieve the desired precision?

  Power developed by the force for a block

The block has a mass of 150 kg and rests on a surface for which the coefficients of static and kinetic friction are 0.5 and 0.4, respectively. If a force F = (60t^2) N, where t is in seconds, is applied to the cable, determine the power developed ..

  Magnitudes of the additional loads

Determine the magnitudes of the additional loads that must be applied at B and F if the resultant of all six loads is to pass through the center of the mat.

  Chlorination tank for killing microorganisms

You are to design a chlorination tank for killing microorganisms in the effluent from a wastewater treatment plant. It is necessary to remove 99% of active bacteria in a wastewater flow of 120 m 3 /hr.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd