Which chemical will be transported the farthest downgradient

Assignment Help Civil Engineering
Reference no: EM13550431

Groundwater has been contaminated with three chemicals: benzene (log Kow 2.13), pentachlorobenzene (log Kow 5.03), and naphthalene (log Kow 3.36). The aquifer (rs = 2.3 g/cm3; h = 0.4; foc = 0.02) has a gradient of 0.004 and hydraulic conductivity of 500 m/day.

a. Which chemical will be transported the farthest downgradient? Draw an overhead snapshot (planar view) of the plume(s) at a representative time.

b. Calculate the retardation coefficient for the three chemicals.

c. Find the Darcy velocity and the average linear groundwater velocity.

d. Ignoring dispersion and the other chemicals, how long will it take the benzene plume to reach a drinking water well 1000 m downgradient?

e. Given an initial benzene concentration of 20 ?g/L and degradation constant in the aquifer of 0.25 yr-1, assess the lifetime cancer risk to an adult of drinking 2 L/day of benzene-contaminated well water for 30 yrs. Assume residential setting

Reference no: EM13550431

Questions Cloud

Determine the required cstr volume v (gallons) : Determine the required CSTR volume, V (gallons), and hydraulic residence time, t = V/Q (hours), to comply with the current industrial pre-treatment permit limitation for phenol.
Calculate the speed of the water relative to the hydrofoil : A two dimensional flow field is defined by u = x^2 - y^2 and v = -2xy. Is the flow rotational or irrotational?A speedboat on hydrofoils is moving at 20 m/s in a freshwater lake
What is the significance of the compresive strength : If the pulleys are fixed to the shaft, determine the magnitude of the tension T and the x,y,z componenet sof reaction at the smooth thrust bearing A and smooth journal bearing B.
Calculate the hydraulic conductivity k of the soil sample : A falling head permeability test was carried out on a 15 cm long sample of silty clay. The diameter of the sample and the standpipe were 9.8 cm and 0.75 cm, respectively. The water level in the standpipe was observed to fall from 60 cm to 45 cm in 12..
Which chemical will be transported the farthest downgradient : Groundwater has been contaminated with three chemicals: benzene (log Kow 2.13), pentachlorobenzene (log Kow 5.03), and naphthalene (log Kow 3.36). The aquifer (rs = 2.3 g/cm3; h = 0.4; foc = 0.02)
Determine the mass flow rate of the cooling water : Refrigerant 134a is compressed at steady state from 2.4 bar, 0 degrees celcius, to 12 bar, 50 degrees celcius. Refrigerant enters the compressor with a volumetric flow rate of 0.38m^3/min, and the power input to the compressor is 2.6 kW.
Nighttime traffic on a single lane of rural highway is light : Nighttime traffic on a single lane of rural highway is light, with a flow of 40 vehicles/hour , and is well described by a Poisson arrival process.
Determine the worked deeloped : Air enters a turbine operating at steady state at 8 bar, 1127 C and exits at 1.5 bar, 347 C. The heat transfer from the turbine to its surroundings is 10 kJ/kg of air flowing through the turbine. Neglecting kinetic and potential energy changes and as..
Water is observed to be seeped through this slope at a rate : The relative density of a sloped sand deposit is known to be 75%. Water is observed to be seeped through this slope at a rate such that the discharge velocity is 0.6 m/day.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the definition of a customer what are some examples

what is the definition of a customer? what are some examples of internal and external customers? is the measurement of

  Determine what is the effluent concentration at the rate

A first order reaction occurs in a PFR at the rate of 2.1 hr^-1. The reactor volume is 1400L and flow is 15 gpm. If the influent concentration is 200 mg/L, then what is the effluent concentration

  What is the ratio of night to day accidents for fatalities

What would the B/C ratio be if the light poles were twice as far apart as assumed above?

  Estimate the weight of concrete in four-lane highway segment

Estimate the weight of concrete in a four-lane highway segment that begins as a 3% grade climb from 1000 feet altitude to 4000 feet and then a 6% downgrade to 2500 feet

  Calculate the rate of removal and the rate constant

A toxic compound being is removed from solution in a CSTR at Steady State according to a first order reaction rate. The upstream concentration of the pollutant is 14 mg/L and the downstream concentration is 1.7 mg/L.

  Calculate void ratio and degree of saturation of the soil

The value of Gs is 2.70. Calculate the void ratio and degree of saturation of the soil. What would be the values of density and water content if the soil were fully saturated at the same void ratio

  Scale of a spring balance problem

The scale of a spring balance reading from 0 to 235 N has a length of 13.0 cm. A fish hanging from the bottom of the spring oscillates....

  Determine what error results from curvature and refraction

Successive plus and minus sights taken on a downhil line of levels are listed below. the values represent the horizontal distances between the instrument and either the plus or minus sights.

  What is the deflection on a mercury manometer connected

A pitot-static tube is used to measure the velocity at the center of the pipe. If the fluid velocity is 10 ft/s, what is the deflection on a mercury manometer connected to the pitot-static tube

  Determine the magnitude of the forces and acting at c

The tube supports the four parallel forces. Determine the magnitude of the forces and acting at C and D so that the equivalent resultant force of the four forces acts at point O.

  Find the pressure head just upstream of c and just down

A pipeline 900 ft long discharges freely at a point 200 ft lower than the water surface at intake. The pipe intake projects into the reservoir. The first 600 ft is of 10-in diameter, and the remaining 300 ft is of 6-in diameter. Find the rate of disc..

  Concrete dam retaining water

A concrete dam retaining water has a specific weight of concrete of 23.5kn/m3, what is the factor of safety against sliding & overturning and pressure intensity on the base if coefficient of friction is 0.45

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd