### Whether you have met your goals and objectives

Assignment Help Civil Engineering
##### Reference no: EM131031828

Project Criteria: How will you assess whether you have met your goals and objectives?

Project Description, Alternatives, including No Action.

### Write a Review

#### Explain break even stripping ratio

Break Even Stripping Ratio (BESR), Given an underground total mining cost of \$8.85 per tonne, surface mining costs of \$2.95 per tonne of ore, and surface mining stripping costs of \$1.75 per tonne of waste

#### Maximum height of its centre of gravity

If a mass of 500kg is placed centrally on the top face of the buoy, find the maximum height of its centre of gravity above the bottom of the buoy so that the buoy may remain in stable equilibrium.

#### Design the pins so that ledge can support doug and jeremy

Assume the ledge has the dimensions shown and is attached to the building with a series of equally spaved pins around the circumference of the building.

#### Determine the values of theta dot and theta dot at instant

The plate OAB forms an equilateral triangle which rotates counterclockwise with increasing speed about point O. If the normal and tangential components of acceleration of the centroid C

#### Compute the stations of the pc and pt for each curve

An 1100 ft. straight line route survey, which had PI's at3+81.27 (I = 12o30') and 5+42.30 (I = 10o56'), laterhad 600 ft radius simple curves inserted at each PI. Computethe following: a)Curve data for each curve: Da, T, L, LC, E, and MO

#### Calculate as accurately as you can the height of the airplan

On a certain day, the barometric pressure at sea level is 30.0 inHg and the temperature is 60 deg. Fahrenheit.  The pressure gage on an airplane flying overhead indicates that the atmospheric pressure at that point is 9.7 psia and that the air temper..

#### Design the traffic pole only vertical element

The maximum wind pressure on the traffic sign is 200 kg/m2. The maximum allowable shear stress is 350 kg/cm2. Design the traffic pole (only vertical element) against torsion knowing that angle of twist at the base

#### Identify the forces that work against success of cladding

Identify the forces that work against the success of cladding systems in keeping the elements out.

#### Find what is the gage pressureat the bottom of the tank

Water occupies the bottom 0.8 m of a cylindrical tank.On top of the water is 0.3 m of kerosene, which is open to the atmosphere. If the temperature is 20 degrees C, what is the gage pressureat the bottom of the tank

#### What is the value of m2 that could be carried by column

The column is braced. The column is required to carry N*=0.75phiNuo kN. What is the value of M2* that could be carried by column considering the slenderness effect. M1*= 0.8M2* Nuo=1000kN r=120mm

#### What is the draft h of the barge when floating in sea water

A barge has the trapeziodal shape and is 22 m long into the paper. If the total weight of barge and cargo is 350 tons, what is the draft H of the barge when floating in sea water

#### Determine the net power delivered and the cycle efficiency

Determine the net power delivered and the cycle efficiency. What is the percent increase in the efficiency compared to an otherwise identical system with no regeneration. Assume “cold air-standard cycle” for both systems above. 