User Account

All Pages

Whether proportional limit is exceeding for either material

Assignment Help Civil Engineering
Reference no: EM13299808

A copper pipe with an outside diameter = 4 inch and inside diameter = 2 5/8 inch is used as an electrical conductor in an energy conversion device that is subjected to a high axial compression load of 55 kips. To prevent this high compression load from buckling the copper pipe, a solid steel support of 2 1/2 inch diameter is placed inside the copper pipe. The copper pipe is 8.000 inches long. The steel support is 8.0001 inches (exactly 1 mil = 1/1000 inch longer).

The additional length for the steel is supposed to cause the steel to fully support the compression load. Unfortunately, it appears as if the large 55 kips load is compressing the steel more than 0.001 inch, so that some of the load is falling on the copper pipe as well.

Therefore, it is desired to determine the following:

(1) negative elongation of the steel cylinder, (2) negative elongation of the copper pipe (should be exactly 0.001 inch less than the steel value), (3) axial force on the steel cylinder, (4) axial force on the copper pipe, (5) axial stress on the steel cylinder, (6) axial stress on the copper pipe, (7) whether the proportional limit is exceeding for either material.

The following values are given: Young's modulus (E) for steel = 30000 ksi, Young's modulus (E) for copper = 17000 ksi, Proportional limit for steel (including safety factor) = 30 ksi, Proportional limit for copper (including safety factor) = 17 ksi.

Reference no: EM13299808

Questions Cloud

Revenue-enhancing measure : Beachside City enacts an ordinance that bans the distribution of all printed materials on city streets. Carl opposes the city’s latest “revenue-enhancing” measure and wants to protest by distributing handbills. In his suit against the city, a cour..
Find the power of the starlight the earth intercepts : Consider a bright star in our night sky. Assume its distance from Earth is 45.9 light-years (ly) and its power output is 4.00 multiply.gif 1028 W, Find the power of the starlight the Earth intercepts
Buying imports versus buying domestic products : The purpose of this assignment is to become familiar with the terms import and export, and then discuss advantages or disadvantages of buying imports versus buying domestic products in relation to the fashion industry.
Find the force must you exert on the wrench : Spark plugs should be tightened to a specified torque of 13.64Nm. What force must you exert on the wrench
Whether proportional limit is exceeding for either material : To prevent this high compression load from buckling the copper pipe, a solid steel support of 2 1/2 inch diameter is placed inside the copper pipe. The copper pipe is 8.000 inches long. The steel support is 8.0001 inches (exactly 1 mil = 1/1000 in..
Market activities-production-buying and selling : What two policies could you use to reduce the total amount of emissions? Why do you think they each would work? What would the benefits of each action be (besides emissions reduction)?
Find the magnitude of the average induced emf in wire : A closed loop of wire is given the shape of a circle with a radius of 0.483 m. find the magnitude of the average induced emf in the wire during this time
Determine what uniformly distributed load can be carried : A simple supported beam 6m long is composed of two C200x28 channel RIVETED FRONT TO FRONT . What uniformly distributed load can be carried in addition to the weight of the beam w/o exceeding a flexural stress of 125MN/m^2
What are the maximum speed and acceleration of the particle : A 2.5-kg particle oscillates on a spring with spring constant 85 N/m. At time t = 1.0s, What are the maximum speed and acceleration of the particle

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the net change in storage during the year

Determine the net change in storage during the year if local municipality is allowed to take 100 MGD from the reservoir. You may neglect infiltration and seepage from the reservoir. Sketch a mas blance of the reservoir.

  What is the pressure difference between two ends of pipe

The pipe contains two 6 in steel elbows, two fully open gate valves, a fully open 90o angle valve, and a swing check valve. If the discharge end of the pipe is located 20 ft higher than the entrance, what is the pressure difference between the two..

  What must be the standard deviation

A distance of 1000 feet is to be taped in a manner to ensure a standard deviation smaller than ±0.06 feet. What must be the standard deviation per 100-ft tape length to achieve the desired precision?

  Determine what should the sample volume be

The dissolved oxygen of sample water is 1.5 mg/L. At 25 C, the dissolved oxygen of the dilution water is 8.25 mg/L. You are told the BOD5 of the sample is 130 mg/L. You have a target final dissolved oxygen of 3.0 mg/L (give yourself some leeway).

  What is the amplitude of the vertical vibration

if the enginer is mounted floatiing on very weak spring, what is the amplitude of the vertical vibration of the engine? (b) if the engine is mounted solidly on a rigid foundation, what is the alternating force amplitude transmitted? Assume the con..

  Determine the quality of the initial state

A two-phase liquid-vapor mixture of water is initially at a pressure of 10 bars. If on heating at fixed volume, the critical point is attained, determine the quality of the initial state.

  Define what must the drivers eye height in the van be

A civil engineering student contends that 60 mph is safe in a van because of the higher driver's eye height. If all other design inputs are standard, what must the driver's eye height in the van be for the student's claim to be valid

  What is the pressure head

Water in a pip has a pressure of 22.1 lb/ft2. What is the pressure head?

  Estimate the et losses for the area in inches and centimeter

The discharge of the river at the basin outlet is measured at an avarage of 650 cfs. assuming that the charge in storage for the system is essentially zero, estimate the ET losses for the area in inches and centimeters for the year

  Determine minimum diameter required for a solid drive shaft

The engine of an automobile supplies 180 hp at 2500 rpm to the drive shaft. If the maximum shearing stress in the drive shaft must be limited to 6 ksi, determine the minimum diameter required (in inches) for a solid drive shaft.

  Draw all aldehyde and ketone isomers of c6h12o

What is the reaction that occurs with hexanal and propanol (give both the hemiacetal and acetal products)?

  Determine economical number of trucks and direct cost

A project involves transporting iron pipe to a jobsite that is 43 miles from the supplier. The pipe will be hauled in trucks that can carry 16 pipes per load. Each pipe is 20 ft in length. The average haul speed of a truck will be 50 mi./hr and re..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd