What would be the absolute pressure of carbon dioxiode

Assignment Help Civil Engineering
Reference no: EM13313457

What would be the absolute pressure, P in kPa, of carbon dioxiode at 20 degrees celcious if the specific weight of carbon dioxide at 20 degrees celcious is 18 N/m^3 and the gas constant, R =1.889x10^2 J/kg*K. (Acceleration due to gravity, g =9.81 m/s^2)

Reference no: EM13313457

Questions Cloud

Discuss the various systems and company strategic vision : Discuss the various systems and the company's strategic vision. You also meet with the heads of Marketing, Travel & Tourism, and Technology to gather their initial thoughts for the site improvements.
Determine thickness of viscous sublayer in a smooth pipe : Determine the thickness of the viscous sublayer in a smooth 20 cm diameter pipe, if the Reynolds number is 25000.
Develop algorithms for explicit solution of kinematic eqtns : Develop algorithms for the explicit solution of the Kinematic Equations when applied to a problem of runoff from a plane surface subject to a steady rate of rainfall excess.
What are the ethical issues in case : Case study - "The BP Oil Spill and Mental Health" What are the ethical issues in case and who are the stakeholders and how are they impacted by this situation
What would be the absolute pressure of carbon dioxiode : What would be the absolute pressure, P in kPa, of carbon dioxiode at 20 degrees celcious if the specific weight of carbon dioxide at 20 degrees celcious is 18 N/m^3 and the gas constant, R =1.889x10^2 J/kg*K.
Explain the equilibirum approach to calculate the ph : Need some assistance: 2a) Calculate the pH of a buffer solution that is 0.250 M in HCN and 0.170 M in KCN. For HCN, Ka = 4.9 x 10^-10 (pka = 9.31). Use the equilibirum approach to calculate this pH
What is the concentration of cod in the effluent : The maximum specific growth rate of the organisms driving this reaction is 5.0 days -1 and the growth rate is 0.54 day-1. The activated sludge tank has a volume of 40 m3 and the flow rate into it is 400 m3/day.
Calculate the magnitude of the frictional force : Two blocks with masses M1=7.90kg and M2=1.20kg are attached by a thin string which goes over a frictionless, Calculate the magnitude of the frictional force acting on M1
What is the concentration of mlvss in the activated sludge : The concentration of Chemical Oxygen Demand (COD) in the effluent from this system is 25 mg L-1. The growth rate of the organisms in this case is 0.9 days-1. The activated sludge tank has a volume of 50 m3 and the flow rate through it is 500 m3 da..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Hat is the probability that more than 2.5 inches

what is the probability that less than 0.5 inches of precipitation will occur in any January? What is the probability that more than 2.5 inches wil

  Determine acceleration a of frame which will cause tension

The steel ball is suspended from the accelerating frame by the two cords A and B. Determine the acceleration a of the frame which will cause the tension in A to be twice that in B.

  How much energy do methanogenic bacteria get from h2

How much energy do methanogenic bacteria get from using glucose and hydrogen (H2) to form methane and water as the products. Determine the net reaction (assume methane and water are the only products).

  Compute the distance when the traffic signal turns red

A driver with his passenger vehicle is driving at 35 mph, when the traffic signal in front of him changes to yellow. He is 100 feet from the intersection when he applies the brakes after a 1-second reaction time.

  What will temperature rise of lead be if there is no cooling

Consider the steady-flow energy equation applied to the given extrusion process. Since the die is horizontal then there will be no change in potential energy from inlet to outlet. Hence the potential energy terms can be neglected.

  Discuss energy storage scheme from a conversion efficiency

an electrical-generation utility sometimes pump liquid water into an elevated reservoir during periods of low electrical consumption. this water is used to generate electricity during periods when the demand for electricity exceeds the utilities a..

  Determine what is angular error if the distance to the pole

A 6-ft range pole is set over a station on which a sight is to be made with a the odolite. If the sight is made to the center of the rod 4-ft up from the ground, and the center of the top of the pole is out of plumb 0.12 feet in a direction normal..

  Determine quantity of lime and soda ash required to soften

Determine the quantity of lime and soda ash required to soften 1 mgd of the following water. Plan to achieve a hardness of 40 mg/L as CaCO3. Note that an excess of 35 mg/L of lime (CaO) is required to achieve 40 mg/L as CaCO3.

  What would the aquifer specific storage be for the porosity

A confined aquifer has a specific storage of 2.5 * 10^-6 /m . The porosity is .20 and the water compressibility is 5 * 10-10/Pa.For the aquifer skeleton compressibility you just calculated, what would the aquifer specific storage be if porosity were ..

  What is the net force acting on the body

Starting from rest, a 4.0-kg body reaches a speed of 8.0 m/s in 2.0 s. What is the net force acting on the body?

  What is expected behavior in charpy impact energy testing

Two identical alloy specimens are being evaluated for use in a new fuel rod design. One sample was exposed to a fast neutron flux of 9 X 10^23 neutrons/(cm2*sec) at a temperature of 323°K for six weeks in a test reactor.

  Direction of flow in a conical tube

A conical tube of length 8 m fixed vertically with its smaller end upwards. The velocity head and pressure head at upper ends are 1.27 m and 2.50 m respectively.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd