What will the volume of the sample be at the water content

Assignment Help Civil Engineering
Reference no: EM13326311

A saturated 100 cm^3 clay sample has a natural water content of30%. It's found that the shrinkage limit occurs when the water content is 19%. If the specific gravity of soil solids is 2.7, what will the volume of the sample be when the water content is 15%?

Reference no: EM13326311

Questions Cloud

Determine the volume of irrigation water needed in ac-ft : A crop has a consumptive use requirement of 1.2 acre-ft of water per acre of crop land. The crop is planted on 780 acres. Precipitation is 3.2 inches. The remainder of the 1.2 ac-ft/ac requirement is met by irrigation.
What would be smallest possible temperature of hot reservoir : An engine does 17200 J of work and rejects 6470 J of heat into a cold reservoir whose temperature is 272 K
Determine the mean stream flow rate in ac-ft per yr : The mean annual precipitation for a 325 mi2 watershed is25 inches. Assume that 20% of the annual precipitation reachesthe watershed outlet as streamflow. Determine the meanstreamflow rate in ac-ft/yr
Determine the speed of the golf ball just after impact : High-speed stroboscopic photographs show that the head of a 250-g golf club is traveling at 52 m/s just before it strikes a 46-g golf ball at rest on a tee. Find the speed of the golf ball just after impact
What will the volume of the sample be at the water content : A saturated 100 cm^3 clay sample has a natural water content of30%. It's found that the shrinkage limit occurs when the water content is 19%. If the specific gravity of soil solids is 2.7,
What is the magnitude of the acceleration a of the chair : Yusef pushes a chair of mass m = 55.0kg across a carpeted floor with a force F? p of magnitude Fp = 148N directed at ? = 35.0degrees below the horizontal, What is the magnitude of the acceleration a of the chair
Estimate the evaporation volume for the month in m3 : Lake Mead has a water surface area of 65,800 hectares. In acertain month the reservoir is full, and the pan evaporation rateis 25 cm. Using a pan coefficient of 0.73, estimate theevaporation volume for the month in m3.
Determine the radial dimension r as a function of z : The pedestal supports a load P at its center. If the material has a mass density p, determine the radial dimension r as a function of z so that the average normal stress in the pedestal remains constant.
What is the angular velocity of the club : A golfer swings his golf club, which is initially at rest, with an average acceleration of 8 rad/s2. What is the angular velocity of the club

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the required area of the members

The truss is to be constructed of members with equal cross-sectional areas and using a material with yield stress 700 MPa. The structure must be designed to support a mass (m) of 3400 kg with a factor of safety of 3.

  Conduiting with a roughness coefficient

Given an 18-in. concrete conduit with a roughness coefficient of n = 0.013, s = 0.02, and a discharge capacity of 15 cfs, what diameter pipe is required to triple the capacity?

  Calculate the forces exerted by the water on the bend

Water flows through a horizotal 45 deg reducing bend with a 36 inch. diameter upstream and a 24 inch diameter downstream, at the rate of 20 cfs under a pressure of 15 psi at the upstream end of the bend. Neglecting head loss in the bend, calculate..

  Will the pce standard of 5 microgram per l be exceeded

If an 18.9 L (5 gallon) bucket of PCE is released (and equally distributed) into a 3.79x10^8 L (100,000,000-gallon) aquifer, will the PCE standard of 5 microgram/L under the Safe Drinking Water Act be exceeded

  Define concept of cstr

Concept of CSTR, A lagoon is to be designed to accommodate an input flow of 0.10 m^3/s of nonconservative pollutant with concentration 30.0mg/L and reaction rate 0.20/day

  What is the diameter of the hole in the aluminum plate

A hole is drilled in an aluminum plate with a steel drill bit whose diameter is 6.245 cm at 20 degrees Celsius. In the process of drilling, the temperatures of the drill bit and plate rise to 168 degrees Celsius.

  Determine the surface at which motion will impend

Two identical uniform boards, each of weight 40lb, are temporarily leaned against each other. Knowing that the coefficient of static friction between all surfaces is 0.40

  Is the head loss too great for the design to work

The design parameters are: • Q = 65 m3/d, • Wetland area (A) = 0.23 hectares (2,300 m2) (including the safety factor), • Aspect ratio = 8:1 • Average water depth (d) = 0.5 m • Bed slope = 1% (0.01 m/m) Given that the Manning's resistance factor

  How many grams of water are in the same solution

How many grams of perchloric acid, HClO4, are contained in 37.6 g of 70.5 wt% aqueous perchloric acid. How many grams of water are in the same solution.

  How long did take for the rocket to reach that max height

At that time, there is no more fuel in the rocket engine and the rocket continues upwards in free fall (g=0 ft/sec/sec). (a) How high will the rocket reach before it begins to fall back to the campus

  What is the static pressure of the water at the outlet

A PVC pipe has an inside diameter of 40 mm, is 30 m long and carries 10°C water at a rate of 3.5 m3/hr. At this rate, the friction factor of the pipe is 0.0814.

  What is the true settling velocity for such a particle

An old occupational hygiene rule of thumb is that a 10 micrometer (micron) silica particle settles at a rare of 1 ft/min (0.5 cm/s). What is the true settling velocity for such a particle? The density of silica is 2600 kg/cubic meter (2.6 g/cubic ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd