What will the ammonia concentration be 10 miles downstream

Assignment Help Civil Engineering
Reference no: EM13317886

A river that behaves as a plug flow reactor has a flow rate of 250 cfs with an average velocity of 1.25 ft/s. The concentration of ammonia is 6 mg/L at one point in the river. If the first - order decay coefficient for the conversion of ammonia to nitrate is 0.05 day-1, what will the ammonia concentration be 10 miles downstream.

Reference no: EM13317886

Questions Cloud

How much work is done by the tension in the cable : A rescue helicopter lifts a 60 kg person straight up by means of a cable. The person has an upward acceleration of 0.70 m/s2, How much work is done by the tension in the cable
Determine what is the volume of the lake in cubic feet : Nitrification, the conversion of ammonia to nitrate (NH3 -> NO3-) occurs in the lake according to first - order kinetics. One stream feeds the lake and one stream empties the lake with the flow rate in both being 8 cfs
What is the flow speed in the narrower section : An ideal fluid flows at 12 m/s in a horizontal pipe. If the pipe narrows to half its original radius, what is the flow speed in the narrower section
Calculate what should the sample volume be : The dissolved oxygen of sample water is 1.5 mg/L. At 25 C, the dissolved oxygen of the dilution water is 8.25 mg/L. You are told the BOD5 of the sample is 130 mg/L. You have a target final dissolved oxygen of 3.0 mg/L
What will the ammonia concentration be 10 miles downstream : The concentration of ammonia is 6 mg/L at one point in the river. If the first - order decay coefficient for the conversion of ammonia to nitrate is 0.05 day-1, what will the ammonia concentration be 10 miles downstream.
Approximate the change in length of the cable : When loaded, the beam carries a 10-kN/m uniformly distributed load. Neglecting the weight of the cable, approximate the following: (a) The change in length of the cable when the beam is under load
Determine the torque that develops in the rod in in-lb : The end of a 0.75-in-diameter rod is fixed to an immovable plate. The length of the rod is 18.0 in. A 50-lb weight is attached to a 16.0-in lever at the end of the Rod so that the weight is hanging perpendicular to the longitudinal axis of the rod..
Bank or use the manufacturer''s payment plan to pay for the : Amos Excavating Inc. is purchasing a bulldozer. The equipment has a price of $100,000. The manufacturer has offered a payment plan that would allow Amos to make 10 equal annual payments of $15,582, with the first payment due one year after the purcha..
How much work is done on the ball by its weight : A 0.621-kg basketball is dropped out of a window that is 5.26 m above the ground. How much work is done on the ball by its weight

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the magnitude of the total force supported

The uniform 4 meter boom has a mass of 60 kg and is pivoted to the back of the truck at A and secured by a cable at C. Calculate the magnitude of the total force supported by the connection at A

  Determine the intensity of w1 and w2 for the resultant force

The post is embedded into a concrete footing so that it is fixed supported. If the reaction of the concrete on the post can be approximated by the distributed loading, determine the intensity of w1 and w2

  Determine horizontal force between the tires and the ground

A 5000 lb truck is being used to lift a 1000 lb boulder B that is on a 200lb pallet A. Knowing the acceleration of the truck is 1ft/s^2, determine a) the horizontal force between the tires and the ground, b) the force between the boulder and the p..

  Related geotechnical engineering

This material is related Geotechnical Engineering, please only answer if you are certain and sure of your answer. An undisturbed soil sample has a dry unit weight of 112 pcf with a specific gravity of solids equals to 2.68.

  Write program that outputs the tuition of four universities

study the sources for current tuition rates and historical trends of tuition. assume that in the next 20 years tuition will change with a similar trend for all universities .

  Estimate the min do and the critical location in river

After initial mixing, the DO concentration in the river is 9.5mg/L and the temperature is 15ºC. If the ultimate BOD of the mixed river water is 30mg/L,

  Estimate the cost of a similar ethanol unit with a capacity

The cost of a 100,000 bbl/d ethanol unit is $40,000,000. From historical records, the capacity exponent ratio for CCR is 0.75. Estimate the cost of a similar ethanol unit with a capacity of 135,000 bbl/d.

  Find the moment of inertia and natural frequency of pipe

Find the moment of inertia and natural frequency of a vertical cantilever pipe 12 feet tall with outer diameter of 4.5 inches and an inner diameter of 4.25 inches. Modulus of Elasticity = 10*10^6 Mass = 50 lbs.

  Determine required diameter of each rod by the concrete

The column is constructed from high-strength concrete and four A-36 steel reinforcing rods. If it is subjected to an axial force of 37.5 kN , determine the required diameter of each rod so that one-fourth of the load is carried by the concrete

  How fast is the water level rising in the reservoir per day

A reservoir with a length of 20 km and width of 3 km has a flood inflow of 1000 m^3/s. (a) If exit flow is restricted to 500 m^3/s, how fast is the water level rising in the reservoir per day

  Explain about atterberg limits and cohesion for shear test

What relationship between Atterberg limits and cohesion for Shear test

  Regenerative thermal oxidizers

A company that manufactures regenerative thermal oxidizers made an investment 10 years ago that is now worth $1,300,000.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd