What will be the new exponent of the blasius equation

Assignment Help Civil Engineering
Reference no: EM13559020

1.the amplitude and the period of y=2cos(-/pi/4x) and sketch the graph of this function. Make sure to indicate key points on your graph.

2.As the Venturi coeffecient increases with increasing Reynolds number of flow in the throat. The reason for this is

1 the friction loss in the throat decreases with in erasing renolds number

2 friction Los in throat increases with decreasing reynolds number

3 the friction Los in throat increases with increasing Reynolds number

3.The pressure difference between a pitot tube reading and a piezo meter reading taken at the same location Ina venturimeter is equivalent to

1. The stagnation pressure head

2. The dynamic pressure head

3. The total pressure head

4.the potential head

4.The relative roughness ofa pipe is 0.0005, if the blasius equation is applicable for Thecflow Reynolds number above 2700 rather then 3000<Re<10^5 what will be the new exponent of the blasius equation?

1. 0.223

2. 0.250

3. 1.786

4. 1.750

Reference no: EM13559020

Questions Cloud

What should be the temperature of the water before mixing : On a soup production line, 100L of concentrated broth(c=1cal/g C) at 90 C will be mixed wth 200L of water. What should be the temperature of the water before mixing
Evaluate the angle between the two halves of the string : An archer's bow is drawn at its midpoint until the tension inthe string is 1.20 times the force exerted by the archer. What is the angle between the two halves of the string
Calculate the expected production and unit cost of loading : A hydraulic shovel will be used to excavate sandy clay and load into a 12 BCY dump trucks. The shovel's production at a 100% efficiency is estimated to be 300 BCY/h. and efficiency is 0.80. Truck travel time is estimated to be 8.0 minutes
Compute the surface area of the filament : The filament of a light bulb has a temperature of 2.90 103 °C and radiates 66 watts of power. Find the surface area of the filament
What will be the new exponent of the blasius equation : The pressure difference between a pitot tube reading and a piezo meter reading taken at the same location Ina venturimeter is equivalent to
What is the temperature of the newly painted radiator : In an old house, the heating system uses radiators, which arehollow metal devices through which hot water or steam circulates. what is the temperature of the newly painted radiator
How much should the company be willing to spend now : Atlas Long-Haul Transportation is considering installing Valutemp temperature loggers in all of its refrigerated trucks for monitoring temperatures during transit. If the systems will reduce insurance claims by $100,000 two years from now
Evaluate the length of the bar : The ends of a thin bar are maintained at differenttemperatures. The temperature of the cooler end is 13°C, find the length of the bar
What is the total equivalent future amount of the company : Vision Technologies Inc., is a small company that uses ultra-wideband technology to develop devices that can detect objects (including people) inside of buildings, behind walls, or below ground.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate total mass emissions of particulates out of steck

The temperature in the stack is 300 F and the pressure is 725 mm Hg. If the total flow rate of gas out of the stack is 190 standard cubic meters per second, calculate the total mass emissions of particulates out of the stack in kg/day.

  Provide the engineering judgement to justify the shipment

The pressure inside the cylinder is 50 atm and temperature is 298o K. Provide your engineering judgement (with calculations) to justify or not justify the shipment of the cylinder.

  Calculate and plot the distribution of total and stresses

A borehole at a site reveals a soil profile comprising 6 m deep fine sand layer overlying a 9 m thick clay layer, which in turn overlies weathered bedrock. The groundwater table is located at a depth of 4 m from the ground surface.

  Determine the maximum displacement of the plate

Determine the maximum displacement of the plate A if the billet strikes the plate with a speed of 8 . Neglect the mass of the springs, rollers and the plates A and B. Take = 4000 , = 40000 .

  If the heading of a member function of a class ends

If the heading of a member function of a class ends with the word const, then the function members cannot modify the private member variables, but can modify the public member variables. the function members cannot modify the public member variables,..

  Determine the coefficient of friction

a mass of 2kilogram is projected with a speed of 3m/s.if a plane inclined 20 degrees with the horizontal.after travelling travelling 0.8meters, the mass comes to rest. determine the coefficient of friction and also the speed as the black returns t..

  Find the partial pressures of the air and water vapor

A space is at a temperature of 75 F, and the relative humidity is 45 percent. find the partial pressures of the air and water vapor

  Find fuel consumption miles per liter for city driving cycle

A car has the following characteristics: weight = 18000 N; cross-sectional area = 2.5 m^2, drag coefficient = 0.5; rolling friction coefficient = 0.02. The energy content of gasoline is 3.5E10^7 Joules/Liter.

  Estimate the maximum risk of cancer due to the exposure

Suppose 2.3 g/day of vinyl chloride, with a half-life of 1 day, leaks into a 20,000 m3 pond. Suppose an adult obtains his drinking water from the pond and consumes the water daily for 7 years

  Estimate the excess pore pressure distribution in clay layer

The project involved rapidly placing 5 m of fill over a large area that applied a stress of 100 kPa to the underlying soil. It was initially expected that after 2 years consolidation would be complete.

  Determine what is the submerged discharge head loss

What is the submerged discharge head loss. By what percentage is this loss reduced if the provision of a draft tube increases the discharge flow area to six times the size.

  Calculate the torque and torsional shearing at the wall

a 31' solid circular bar of 2" diameter is fixed to a wall. it is made of aluminum of E=10*10^6. a 30" circular solid 1" diameter aluminum bar is welded to the 2" bar at a 30" centerline perpendicular relative to the other bar per the diagram.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd