Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A rectangular block of aluminum 30 mm × 60 mm × 90 mm is placed in a pressure chamber and subjected to a pressure of 100 MPa. If the modulus of elasticity is 70 GPa and Poisson's ratio is 0.333, what will be the decrease in the longest side of the block, assuming that the material remains within the linear elastic region? What will be the decrease in the volume of the block?
The bar under the applied force is now 2.448 meters long. Calculate the following for the bar: a) engineering stress, b) engineering strain, c) true strain, d) Young's modulus, e) What additional information would you need to calculate the true st..
The PI is at station 250+50, the design speed is 65mi/h, and a maximum superelevation of 0.07 ft/ft is to be used. If the central angle of the curve is 38 degrees, design a curve for the highway by computing the radius and stationing of PC and PT.
At a specified point on a highway, vehicles are known to arrive according to a Poisson process. Vehicles are counted in 20-second intervals, and vehicle counts are taken in 120 of these time intervals.
Compute the maximum acceptable service load on an A36 steel plate tension member 1/4in.x12in. having a single line of holes parallel to the direction of loading. The load is 25% dead load and 75% live load, and 7/8in. diameter bolts are used.
If 0.100 mol each of SO2 and NO2 are placed in a 500 mL vessel at this temperature, what are the concentrations of the reactants and products when equilibrium is established for this reaction?
The IIT components of ownership cost based on average annual value are: Tax-3%, Insurance -4%, and Interest-7%. a) What is the average annual value?
A coin is tossed and a single 6-sided die is rolled. Find the probability of landing on the head side of the coin and rolling a 3 on the die.
if you had a choice of three kinds of aggregate--a sandstone,a crushed basalt,and a quartizite,you may select the basalt.Give one possible characteristic or property of sanstone and of the quartzite that made you decide not to select it for your c..
A u-tube manometer is used to measure the pressure of a vessel under vacuum. Assume the manometer is open to atmospheric pressure (101.325 kPa) and the density of the fluid in the manometer is 12 g/cm3.
The "sea-level adjusted" pressure at the airport was about 30.57 inches of mercury. Assuming the density of air is 1.30 kg/m3 and the gas constant for air is 287. J/(kg K), calculate the temperature of the air in Fahrenheit.
Compute the maximum service (unfactored) concentrated live load that can be applied at 1ft from the free end of the cantilever. Use load and strength -reduction factors from ACI Code Sections 9.2 and 9.3. Also check As,min.
A level is set up midway between two wood stakes that are about 300 feet apart. The rod reading on Stake A is 9.65 ft and the reading on stake B is 4.23 ft. The level is then set up 6 feet in front of stake B.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd