What was the specific work done by the fan on the gas for

Assignment Help Mechanical Engineering
Reference no: EM13621351

A wind tunnel draws atmospheric air at 20C and 101.3 kPa by a large fan located at the exit of the tunnel. A) If the air velocity in the tunnel is 80 m/s, determine the pressure in the tunnel. If the velocity remains constant in the tunnel but a storm front comes through such that the atmospheric temperature and pressure drop to 17C and 95 kPa, respectively B) determine the new pressure in the wind tunnel. If the exit velocity (after the fan) is 10 m/s, what was the specific work done by the fan on the gas (for both situations) in J/kg? Does it cost more to run the tunnel before or after the storm front comes through? The fan discharges the air to the atmosphere (at atmospheric temperature and pressure) and the cost to run the tunnel is proportional to the power used by the fan.

Reference no: EM13621351

Questions Cloud

For 40 hardware callers the average was 168 minutes with a : a computer help desk is provided by gregory. some of the callers need assistance with hardware and other with software.
Determine the pressure difference across the pump assume : underground water is to be pumped by a 70 efficient 3-kw submerged pump to a pool whose free surface is 30 m above the
The turners have purchased a house for 160000 they made an : the turners have purchased a house for 160000. they made an initial down payment of 30000 and secured a mortgage with
A corporation creates a sinking fund in order to have : a corporation creates a sinking fund in order to have 980000 to replace some machinery in 9 years. how much should be
What was the specific work done by the fan on the gas for : a wind tunnel draws atmospheric air at 20c and 101.3 kpa by a large fan located at the exit of the tunnel. a if the air
A person is riding merrily along on his road bicycle at v : a person is riding merrily along on his road bicycle at v mph. what is the approximate minimum speed v in mph necessary
Determine the outlet fluid temperatures what is the largest : consider a concentric tube heat exchanger with hot and cold water inlet temperature of 200 and 35c respectively. the
How much interest would they earn over the life of the : a corporation creates a sinking fund in order to have 980000 to replace some machinery in 9 years. how much should be
A research study showed that 50 of workers change jobs : a research study showed that 50 of workers change jobs within 2 years of employment. george took a random sample of 100

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  A tube with elastic modulus of 75 gpa is used to support a

a tube with elastic modulus of 75 gpa is used to support a compressive load. it is required that this tube must not

  A 10 lb bag is pushed off a and swings in a verticle plane

a 10 lb bag is pushed off a and swings in a verticle plane and the end of rope l5. calculate and plot the swing of the

  Consider the equation dydt y2y2-1 a- determine the

consider the equation dydt y2y2-1 a- determine the equilibria and classify each one as asymptotically stable unstable

  How do you calculate the strain of a solid cantilever

how do you calculate the strain of a solid cantilever bending beam fixed at one end if given curvature of 0.0243 m and

  Draw the stress distribution along the walled thickness

Draw the stress distribution along the walled thickness and discuss whether the composite with the applied pressure is safe or not by using von-Mises and Tresca theory.

  Design the pump power and the diameter of brunching pipes

Design the pump power and the diameter of brunching pipes D1, D2, D3, so that the flow rate coming into all buildings are Q1=Q2=Q3=4.5m^3/hr, when all four valves v, V1, V2, V3 are open.

  A cyclist is traveling at 8ms when she encounters a hill

a cyclist is traveling at 8ms when she encounters a hill with 2 grade assume the elevation increases by 2 for every 100

  Draw the projections of a rhombus having diagonals

draw the projections of a rhombus having diagonals 125mm and 50 mm long, the smaller diagonal of which is parallel to both the principal planes, while the other is inclined at 30 to the H.P.

  Determine the phase or phases in a system consisting of h2o

determine the phase or phases in a system consisting of h2o at the following conditions and sketch both the p-v and t-v

  A pressurized water tank is used as a source of water for a

a pressurized water tank is used as a source of water for a fire hose. the pressure of the air in the top of the tank

  During a reversible process where the volume of the

one pound-mass of air at 78 degrees f and 75 psia is contained in a piston-cylinder device. during a reversible process

  A three-point bending test is performed on a spinel mgal2o4

a three-point bending test is performed on a spinel mgal2o4 specimen having a rectangular cross section of height d 3.8

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd