What was the intensity of the erthquaker

Assignment Help Civil Engineering
Reference no: EM13562715

A city near the epicenter of an earthquake sustains major damage to poorly constructed building, althought hospital and schools designed to resist dmage from ground motion sustsain only minor damage.  Tall, thin structure as chmney and towers topple throuhgout the city, and nwely deposited mounds of sands are found on th ground surface near the river.  What was the intensity of the erthquaker?

Reference no: EM13562715

Questions Cloud

Determine the magnitude and location of the resultant force : An open rectangular tanks is 3m wide and 4m long. The tank contains water to depth of 2m and oil (SG=0.8) on top of the water to a depth of 1m. Determine the magnitude and location of the resultant force acting on one end of the tank (i.e. 3m high by..
Calculate the difference in elevation from a to b : In trigonometric leveling from point A to point B, the slope distance and the zenith angle measured in A were 2504.897 m and 85o08’54”. At B, these measurements were 2504.891 m and 94o52’10” respectively
Compute a satisfactory curve length : A highway reconstruction project is being undertaken to reduce crash rates. the reconstruction project involves a major realignment of the highway such that a 60mi/h design speed is attained.
Determine the pressure at b in psig : Oil (specific gravity 0.752) flows through a 6" horizontal pipe under a pressure of 60 psi. Assuming no losses, what is the flow in cfs if the pressure at a 3" diameter reduction is 20 psi?
What was the intensity of the erthquaker : A city near the epicenter of an earthquake sustains major damage to poorly constructed building, althought hospital and schools designed to resist dmage from ground motion sustsain only minor damage.
What is the value of the kinetic coefficient of friction : A 2kg moves down a 45 degree incline at a constant velocity of .1m/s. What is the value of the kinetic coefficient of friction between the object and the incline?
Compute the effective normal stress and the shear stress : The water table is at a depth of 1 m. Compute the effective normal stress and the shear stress acting on a plane rotated 60 degrees clockwise from the horizontal at a depth of 2.5 m in this deposit.
What is the current rate at which water enters and leaves : Assuming that minimal water is lost due to evaporation and the total volume remains constant, what is the current rate at which water enters and leaves the San Vicente reservoir?
Do theses waters exceed the critical : Infants drinking baby formula prepared with water containing nitrate concentrations exceeding 10.0 mg NO3- N/L (nitrate as nitrogen per litre)

Reviews

Write a Review

Civil Engineering Questions & Answers

  If the bearing stress on the concrete pedestal must not

If the allowable stress in the cylinder is 55 MPa, what is the maximum internal diameter (nearest integer, such as 10, 11, 12, …., in units of millimetres) of the cylinder?

  Determine soils angle of internal friction under pressure

A triaxial test was performed on a dry, cohesionless soil under confining pressure of 144 kN/m^2. If the sample failed when the deviator stress reached 395.8 kN/m^2, determine the soil's angle of internal friction.

  Calculate an estimate of the friction coefficient of steel

A fellow I know wanted to know the coefficient of friction between steel and commercial carpet. The value was not in the tables of any textbook he had, so he devised an experiment.

  What fraction of the flue gas stream would need to be bypass

An electrostatic precipitator for a coal-fired power plant has an overall particulate recovery of 95%. The company engineer decides that this is too good, that it is not necessary to be this efficient

  Determine the largest load p that can be supported

A log that is 2 ft in diameter is to be cut into a rectangular section for use as a simply supported beam. The material is wood select structural grade (Douglas Fir) with a specific gravity of 0.017 lb/in3.

  What is min required heat transfer rate from heat source

A waste heat source is available at 400°C. A heat engine operates using heat from this source. It rejects heat to the surroundings at 38°C. The power from the engine runs an air conditioner to keep the air inside a building at 25°C

  Design a spreadsheet to estimate the dimensions of a tank

Design a spreadsheet to estimate the dimensions of a tank for holding water. The spreadsheet should use input values from the user to return the height and diameter for a tank that will use the smallest amount of steel and therefore cost the least to..

  Calculate the weight of the waste gas processed per min

A gas containing 80% CH4 and 20% (by mole) He is sent through a quartz diffusion tube to recover the He. 20% by weight of the original gas is recovered and its composition is 50% He.

  Describe what is the natural water content of the clay

a 110 cubic centimeter volume of clay weighs 145 g in its undisturbed state. when the clay specimen is dried it weighs 110.5g. what is the natural water content of the clay, and what is the degree of saturation Assume Gs=2.70

  What is force of water on spillway whose upstream is given

What is the force of the water on a spillway whose upstream depth is 1.2m and whose downstream depth is 0.2m. The width of the spillway is 3m.

  Determine the maximum shear stress for the shape

The shape below has a cut along the entire length of the member thus making it an open section. The uniform thickness is 0.125in. Determine the maximum shear stress for the shape. Compare the stress for this open shape to a shape without a cut.

  Determine the maximum bending stress that will occur

Determine the maximum bending stress that will occur in a timber beam of rectangular section 250mm x 80mm when a bending movement of 500N is applied about the x-x axis

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd