What speed ship will attain in 1day assuming that reflection

Assignment Help Electrical Engineering
Reference no: EM13280400

A small spaceship whose mass is 1500 kg is drifting in outer space with negligible gravitational forces acting on it. A 10 kW laser beam pointing at the ship is turned on at t=0. What speed the ship will attain in 1 day assuming that the surface of the ship is perfectly reflective and perpendicular tot the beam?

Reference no: EM13280400

Questions Cloud

What is the power received by the radio telescope : Frank D. Drake, an investigator in the SETI (Search for Extra-Terrestrial Intelligence) program, once said that the large radio telescope in Arecibo, Puerto Rico, can detect a signal which lays down only a picowatt of power over entire surface of ..
Find impulse does the clay exert on the block : A 50g ball of clay is thrown horizontally at 40m/s toward a 1.5kg block sitting at rest on a frictionless hi surface. The clayts and sticks to the block. What impulse does the clay exert on the block
Explain what is the average cell surface area : Estimate the average area of a cell in square micrometers, and the diameter of a single cell in micrometers, using the data below. Assume the cells are roughly spherical. What is the average cell surface area
How would the required return for equity holders change : If a company increases the ammount of debt financing in the company's capital structure, how would the required return for equity holders change? Expain why in more than 2 sentences.
What speed ship will attain in 1day assuming that reflection : A 10 kW laser beam pointing at the ship is turned on at t=0. What speed the ship will attain in 1 day assuming that the surface of the ship is perfectly reflective and perpendicular tot the beam.
Calculate the speed at which the ball leaves the gun : A gun shoots small plastic balls. The ball falls 1.2 m while traveling horizontally 5.1 m. Calculate the speed the ball leaves the gun
Define what is the final temperature of water : A 23.45g piece of iron and a 29.95g piece of gold at 100.00C were dropped into 530ml of water at 16.05C. The molar heat capacities of iron and gold are 25.19 (j/mol x C) and 25.41 j/(mol x C). respectively. What is the final temperature of water a..
What is the radius of the sphere : A uniformly charged sphere has a potential on its surface of 450 V. What is the radius of the sphere
With what speed does the mass exit the rough region : A spring (k=100N/m) is squished x=.40 m with a mass m=1 kg held against it. With what speed v does the mass exit the rough region

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Explain a first-order circuit

A first-order circuit, having a gain of 10 at dc and a gain of 1 at infinite frequency, has its pole at 20 kHz. Find its transfer function.

  Give calculation to get maximum marks and mention units

Use nodal analysis to find VO in the network given below. Identify and label each node otherwise you will lose your marks. Write each step of the calculation to get maximum marks and also mention the units of each derived value.

  Determine the power factor of the load and the line current

An idustrial plant uses two pieces of equipment. A) A lightining element that comsumes 10 kw when supplied at 100v, 60Hz; and B) A furnance consuming 360 kw and 400 KVAR when supplied at 2000v, 60Hz.

  Calculate the resistance-inductance and capacitance

A series RLC circuit connected to a 100-V 60-Hz source draws a current of 2.5 A. The measured power factor for the circuit is 0.7 leading, and the inductive reactive power is 300VAr. Calculate the resistance, inductance and capacitance.

  Determine the transfer function of this process in the s

Assume the initial state is steady (y = 0 at t = -0) a) Determine the transfer function of this process in the s domain. b) If the input is a ramp change in u(t) = 4t, determine the value of y(t) when t = 10s.

  Find the inductive and capacitive reactance at resonance

in a RLC series circuit R=500Ω L=0.4mH and C=100pF the circuit is connected to the terminals of an ac source with an rms voltage of 1V, and a variable frequency calculate the following A) resonant frequency

  Find the new bit error rate in the presence of the jammer

It is decided to apply a Fast Hopping (FH) scheme on the above ASK system. The hopping is made over 12 channels of 100 kHz; or over 1.2 MHz bandwidth. The ASK signal hops 6 bands per bit period. Now a strong jammer randomly jams one of the 12 FH c..

  Find a voltage waveform and current waveform

The average power is not necessarily equal to the average current times the average voltage. To show this, find a voltage waveform and current waveform where each has a zero average value but their product has a non-zero value.

  Write a matlab script file that uses the function from part

Write a Matlab script file that uses the function from Part 1 to apply "water filling" for distributing total power P = 10 over N = 5 parallel channels with noise levels x = [2, 3, 1, 6, 4] and that plots the noise and power distribution over the ..

  Find line current-power factor and complex power

Three loads 3+4j are connected in delta to a 208-V, three phase line find line current, power factor, real power, reactive power and complex power

  Determine what is the tension level of the transfer line

A windmill park produces energy at a tension level of 11kV. The park is going to be coupled up with a 11kV net not far from the park. To reduce the loss in transer the tension is tranfomred p at the parka nd down again right before coupling to the..

  What is the voltage across an ideal voltmeter

A voltage divider has a 5 V source and two 150 kilo ohm resistors. What is the voltage across(a) an ideal voltmeter  (b) a voltmeter with an input resistance of 10 mega ohms

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd