What percentage savings is achieved by replacing single pane

Assignment Help Civil Engineering
Reference no: EM13297979

Consider an old house(1858) constructed of 2-in hardwood planks plus 1/2 in of lapped wood siding, sheetrock(1/2 in) covers the inside of the dwelling. The size of the house is 28ftx40ftx10ft. For simplicity, assume the roof is flat, covered with 1-in plywood plus asbestos shingles and has 3 1/2 in of fiberglass insulation. There is a wood subfloor (25/32 in) in the attic and a ahrdwood floor (3/4 in over an unheated crawl space. Assume 25% of the wall areas are single paned windows. The outside is 40oF colder than the inside.

a)Now, consider only conductive heat losses, calculate the heating needs in Btu/h

b) what will be the percent savings in heating needs of this house is insulated with a total of 6-in of fiberglass in the attic

c) What will be the percent savings in heating needs be if this house is insulated with 3 1/2 in of fiberglass in the walls (ceiling is 3 1/2 in of insulation)

d)What percentage savings is achieved by replacing single pane windows with double paned windows (1/2 in in airspace)

Reference no: EM13297979

Questions Cloud

Develop a resume for the position identified : The three companies researched and develop a resume for the position identified in the case summary
Explain balanced formation equations at standard conditions : Use Table 6.3 or Appendix B to write balanced formation equations at standard conditions for each of the following compounds. (Type your answer using the format O3 for O3. Write all coefficients, even if they are fractions or 1.)
What is the initial voltage across the capacitor : A 2.70 uF capacitor is charged to 80 uC and then placed in series with a 6.4 M ohms resistor and an open switch. What is the initial voltage across the capacitor
What will is the value of your transaction today : You represent a US based business involved in an international (cross-border) purchase. In order to complete your purchase you will need one million in foreign currency (UK Pounds/Brazilian Real/Thailand Bhat)
What percentage savings is achieved by replacing single pane : The size of the house is 28ftx40ftx10ft. For simplicity, assume the roof is flat, covered with 1-in plywood plus asbestos shingles and has 3 1/2 in of fiberglass insulation. There is a wood subfloor (25/32 in) in the attic and a ahrdwood floor (3/..
Find the linear acceleration of the bicycle : A bicycle has wheels with a diameter (DIAMETER, not radius) of 0.620 m. Find the linear acceleration of the bicycle
The negotiation in collective bargaining : The negotiation in collective bargaining.
Determine the pressure within the tank using psf as unit : A water-filled U-tube manometer is used to measure the pressure inside a tank that contains air. The water level in the U-tube on the side that connects to the tank is 5 ft above the base of the tank.
What is variable cost of goods sold : During the year ROA produces 40,000 skis and sells 37,000.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the factor of safety and deformation

A 1 cm diameter, 0.4 m long steel rod is to be used in an application where it will be subjected to an axial tensile force of 15kN. The factor of safety based on yield stress must be at least 1.5, and the axial deformation must not exceed 2 cm.

  Average waiting time in the queue

What is the average length of queue, the average time spent in the system, and the average waiting time in the queue?

  The development of complex algorithms that can mine mounds

The development of complex algorithms that can mine mounds of data that have been collected from people and digital devices have led to the adoption of data mining by most businesses as a means of understanding their customers better than before

  Horizontal and vertical component from this acting force

What would be the Horizontal and vertical component from this acting force see diagram

  Determine how large must the reactor be

A CMFR is to be designed to remove contaminant A from water with a steady-state efficiency of 95 percent. The decay reaction is zeroth order, with a rate constant of 0.1M/h. The inlet concentration of A is 0.5 M.

  Determine the reaction forces at points b and c

The fixture AC is designed with a screw adjustment to regulate the height of the 900 N load supported by the roller at A. The screw bears against a smooth surface at B. Determine the reaction forces at points B and C. Neglect the weight of the fix..

  How fast will it be going when it hits the ground

How fast will it be going when it hits the ground?

  Find what is the outflow effluent g-loop concentration

A completely mixed continous bioreactor used for growing oenicilin operates at a zero orer system. The input glucose is converted into various organic yeats. the flow rate ti this system is 20 liters per minute and the conversin rate is 4 mg/(min-..

  What is the factor of safety against sliding

a concrete dam retaining water has a specific weight of concrete of 23.5kn/m3, what is the factor of safety against sliding & overturning and pressure intensity on the base if coefficient of friction is 0.45.

  Regenerative thermal oxidizers

A company that manufactures regenerative thermal oxidizers made an investment 10 years ago that is now worth $1,300,000.

  Coefficient of static friction between pacakges

The belt starts from rest at time t=0 and its speed increases at a constant rate of 150mm/s^2. Knowing that the coefficient of static friction between the pacakges..

  Existing equal tangent sag curve

An overpass is being built over the PVI of an existing equal tangent sag curve. The sag curve has a 70 mi/h design speed, and G1 = -6%, G2 = +3%.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd