What operating gear and speed do you estimate

Reference no: EM13561590

Stripping overburden in the Illinois coal belt, the Dusty Coal Company uses 270-horsepower, track-type tractors (with direct-drive transmissions) and drawn scrapers. The overburden is a very soft loam that weighs 2,800 lb/yd (loose). Estimated RR factor for the haul road is 300 lb/ton. If the scraper weighs 35,000 lb (empty) and carries 25 loose cubic yards per trip, what is the RR of the loaded unit? What operating gear and speed do you estimate for the loaded machines on level ground?

Reference no: EM13561590

Questions Cloud

Compute the least-squares line for predicting vertical : An article reports measurements of expansion for several concrete bridges in the area of Quebec City. Following are measurements of horizontal and vertical expansion (in parts per hundred thousand) for several locations on the Pere-Lelievre Bridge.

Determine force acting on the sluice gate : The flow rate of water through a 8 meter wide channel is controlled by a sluice gate. The flow depths are measured to be 1.3 and 0.45 meters upstream and downstream from the gates. Determine force acting on the sluice gate

What are some of the properties that make aluminum : What are some of the properties that make aluminum an extremely useful engineering material?

Estimate how fast the solvent volatilizes : Use the same conditions as (a), except a rainstorm covers the TCE with 1 cm of water. Assume TCE dissolves into water and quickly reaches equilibrium with the water.

What operating gear and speed do you estimate : Stripping overburden in the Illinois coal belt, the Dusty Coal Company uses 270-horsepower, track-type tractors (with direct-drive transmissions) and drawn scrapers. The overburden is a very soft loam that weighs 2,800 lb/yd (loose). Estimated RR fac..

What is the equation for the applied load : The vertical deflection in a simply supported beam follows the following equation: v = -[(w_0*x)/(360LEI)](7L^4 - 10*L^2*x^2 + 3*x^4) What is the equation for the applied load w(x)? Note that wo is a constant value.

A plume of bromoform dissolved in grounwater originates : A plume of bromoform dissolved in grounwater originates from two storage ponds with a total length of 150 m. The ponds penetrate the unconfined aquifer to a depth of 5 m.

How much does the aggregate in the wheelbarrow weight : You fill a 2-cubic wheelbarrow to the top with aggregate. if the specific gravity of the aggregate is 2.548, and 18% of the aggregate is void spaces, how much does the aggregate in the wheelbarrow weight?

Determine the pi terms suitable to describe this problem : The drag force (Fd) acting on a spherical particle that falls very slowly though a viscous fluid is a function of a particle diameter, d, the particle velocity, V, and the fluid viscosity, u. Using dimensional analysis determine the Pi term(s) suitab..

User Account

All Pages