What must the voltage applied at the armature terminal be

Assignment Help Electrical Engineering

Reference no: EM13289991

A permanent magnet commutator motor produces a torque of8 N. m with armature current = 10A. armature R=.16 ohms. if motordrives a load requiring torque of 20 N. m at speed = 1800rpm, what must the voltage applied at the armature terminal be?

Reference no: EM13289991

Questions Cloud

Determine torque available at maxspeed for armature current : A commutator motor with its armature supplied from variable voltage source. As the voltage is varied from 0 to 600V,the drive speed varies from 0 to 1600rpm, the field flux isconstant, all losses-ignored.

Obtain the speed of the proton : A particle with a charge of -60.0 nC is placed at the center of a nonconducting spherical shell of inner radius 20.0 cm, Calculate the speed of the proton

What are the two possible resistances of the light bulb : A light bulb is wired in series with a 133-? resistor, and they are connected across a 120-V source. What are the two possible resistances of the light bulb

Enter a decimal value : Enter a decimal value

What must the voltage applied at the armature terminal be : A permanent magnet commutator motor produces a torque of8 N. m with armature current = 10A. armature R=.16 ohms. if motordrives a load requiring torque of 20 N. m at speed = 1800rpm

Find the fractions of the cube immersed in water and oil : A large container, open at the top, is half-filled with water (?H2O = 1000 kg/m3). Determine the fractions of the cube immersed in water and oil

Design a passive low-filter using resistors and a capacitor : Design a passive low-filter using resistors and a 100uF capacitor that will have a passband gain of 0.8 and a cutoff frequency of10000 HZ.

Find the components of the displacement vector : Suppose the superhero had flown 145 m at a 125° angle with respect to the positive x-axis

Find must be the length of the wire : A 115-V source of emf is attached to a heating element with is a coil of nichrome wire (r=100*10^-8) of cross section 1.20 mm^2. What must be the length of the wire

User Account

All Pages