### What is the true settling velocity for such a particle

Assignment Help Civil Engineering
##### Reference no: EM13312695

An old occupational hygiene rule of thumb is that a 10 micrometer (micron) silica particle settles at a rare of 1 ft/min (0.5 cm/s). What is the true settling velocity for such a particle? The density of silica is 2600 kg/cubic meter (2.6 g/cubic centimeter).

#### Questions Cloud

 Determine cunningham correction factor at standard condition : For a .15 micrometer diameter spherical particle (density of particle = 2500 kg/cubic meter) determine the Cunningham correction factor at standard conditions. Explain the box length to decrease the transition energy : For a particle in a box system, by what factor do you need to change the box length to decrease the transition energy by a factor 5 for a fixed value of mass Define why does bromine add faster to a disubstituted double : Why does bromine add faster to a disubstituted double bond than a monosubstituted double bond to produce dibromides Depict a mechanism for the reaction of cyclohexene : If one reacts bromine in water with a double bond a vicinal halohydrin is formed. Provide an explanation for this result and show a mechanism for the reaction of cyclohexene with bromine in water. What is the true settling velocity for such a particle : An old occupational hygiene rule of thumb is that a 10 micrometer (micron) silica particle settles at a rare of 1 ft/min (0.5 cm/s). What is the true settling velocity for such a particle? The density of silica is 2600 kg/cubic meter (2.6 g/cubic .. Explain ionization involves completely removing an electron : Ionization involves completely removing an electron from an atom. What wavelength of light contains enough energy in a single photon to ionize a hydrogen atom What is the magnitude of the acceleration of the proton : A proton accelerates from rest in a uniform electric field of 524 N/C. What is the magnitude of the acceleration of the proton Explain the silver-silver chloride electrode : Suppose that the silver-silver chloride electrode in the figure is replaced by a saturated calomel electrode. Calculate the cell voltage if [Fe2+]/[Fe3+] = 5.0 10-3. V What would you consider some of the key considerations : Explain your choices. Is the organization you work for (or one that you are familiar with) meeting these key considerations?

### Write a Review

#### Determine the cost of capital for the company

a new space age development corporation in wichita kansas has borrowed a sum of \$4M from a friendly bank at an interest rate of 9%. the company has also borrowed another \$1M from other sources at an interest rate of 8%.

determine the total dead load, per foot of length, each beam must support.

#### Calculate the work done by gases with constant specific heat

The gases are expanded to 140 kPa with a reversible adiabatic process. Calculate the work done by the gases, assuming they can be approximated by air with constant specific heats.

#### At which the driver could apply the brakes and still stop

The road is in good, dry conditions until 160 ft before the stalled car where it is wet and stays wet for the remaining length. What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitt..

#### Determine is the flow rate typical for a bathroom faucet

Water in a household plumbing system originates at the neighborhood water main where the pressure is 480kPa, the velocity is 5m/s, and the elevation is 2.44 m. A 19 mm (3/4-in) copper service line supplies water to a two-story residence

#### What kind of soil labs are good for the construction

What kind of soil labs are good for the construction which is underlying the wet clay is dense sand. For example, compaction, and so on.

#### What was the probable classification of the soil tested

The specimen was 8 cm in diameter and had a length of 85 mm. The area of the standpipe was 0.45 cm^2. Compute the coefficient of permeability of the soil in cm/s, m/s, and ft/d. What was the probable classification of the soil tested

#### Determine which motor should be installed based on the pw

At the end of 15 years, the first motor will have a salvage value of \$50 and the second motor will have a salvage value of \$100. consider the MARR to be 8%. (note : 1HP=0.7457 kw). Determine which motor should be installed based on the PW criterio..

#### Determine the change in the bar thickness of axial load

At an axial load of 23 kN, a 40-mm-wide by 10-mm-thick polyimide polymer bar elongates 2.7 mm while the bar width contracts 0.17 mm. The bar is 240 mm long. At the 23-kN load, the stress in the polymer bar is less than its proportional limit.

#### Freeways density and level of service

What will the freeway's density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are unchanged).

#### Determine the storage content at the end of 30 days

During a particular 30-day period, the streamflow flowing into a reservoir averaged 5.0 m3/s. Water supply withdrawals from the reservoir averaged 136 mgd. The only other outflow from the reservoir was 9.4 cm of evaporation from the water surface.

#### Determine the control efficiency needed to meet the criteria

A Chemical manufacturer emits air with 250 PPM of toluene at 1 atm and 30 degrees C at a flow rate of 10,000 cubic meters per minute.The air is routed to a biofilter to control total emissions to less than 110 kg/day of toluene.