What is the total time spent in the system by all vehicles

Assignment Help Civil Engineering
Reference no: EM13313501

Vehicles arrive at a toll bridge at a rate of 430 veh/hr (the time between arrivals is exponentially distributed) Two toll booths are open and each can process arrivals (collect tolls) at a mean rate of 10 seconds per vehicle ( the processing time is also exponentially distributed) What is the total time spent in the system by all vehicles in a 1 hour period?

Reference no: EM13313501

Questions Cloud

How much information is available to potential hackers : Maintaining a proactive approach on security requires that an organization perform its own hacking footprinting to see how much information is available to potential hackers
Calculate the youngs modulus of this tendon : A 14.4 cm long tendon was found to stretch 3.79 mm by a force of 11.1 N. Calculate the Young's modulus of this tendon
Find the final speed of both vehicles after the collision : A 650-kg car stopped at an intersection is rear-ended by a 1720-kg truck moving with a speed of 22 m/s. find the final speed of both vehicles after the collision
Company called aphrodite it staffing solution : Based on a company called Aphrodite IT staffing solution,
What is the total time spent in the system by all vehicles : Vehicles arrive at a toll bridge at a rate of 430 veh/hr (the time between arrivals is exponentially distributed) Two toll booths are open and each can process arrivals (collect tolls) at a mean rate of 10 seconds per vehicle
Describe what actions you would take and in what sequence : Describe what actions you would take and in what sequence. How would your adjustment actions differ if the person were the lead tester?
What is the acceleration of the particle : A particle moving along a 2-d x-y plane has its velocity described by the functions: Vx=2t^2, what is the acceleration of the particle
Determine the flow rate per unit width of the auquifer : The potentiometric surface elevations at two observation wells 1000 m apart are 52.35 m and 56.90 m. If the horizontal hydraulic conductivity of the auquifer is 25 m/ day determine the flow rate per unit width of the auquifer.
Write a program that reads a number in feet : Write a program that reads a number in feet, converts it to meters, and displays the result. One foot is 0.305 meters.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What would side slope of cut be if catch point is located

A backsight reading of 2.56 was obtained with rod at A and a foresight reading of 7.45 was obtained with the rod at the trial point B. If B is located 37.00 feet from the center line of a planned 50-foot wide road, is the catch point located uphi..

  What is limiting depth of the exacavation to avoid heaving

An excavation is proposed for a site consisting of a homogenous, isotropic later of silt clay, 14.24 m thick, above a deep deposit of sand. The groundwater is 2m below ground level outside the excavation. The groundwater level inside the excavatio..

  Determine what is the pressure in the pipe at floor level

A water storage tank is on the roof of a factory building & the surface of the water is 50 ft above the floor of the factory. if a pipe connects the storage tank to the floor level & the pipe is full of static water

  What is the level of service on a km long percent upgrade

A rural freeway has an ideal free-flow speed of 120 km/h and two 3.6 m lanes in each direction, with right shoulder lateral clearance of 1.2 m. Interchanges are spaced approximately 5 km apart. Traffic consists of 10 percent trucks and buses and 8..

  Determine the flow area

A rectangular concrete channel is 3 m wide and 2 m high. The water 20 deg Celsius in the main channel is 1.5 m deep and is flowing at a rate of 30 m^3/s. determine the flow area, wetted perimeter, and hydraulic radius. is the flow laminar or turbu..

  Compute how many grams of water must be added to soil

it has been calculated that the maximum density for the soil will be obtained when the water content reaches 21.5%. Compute how many grams of water must be added to each 1000g of soil( in its natural state) in order to increase the water content 2..

  Find the required minimum area for the heat transfer

Assume that the wall separating the steam and seawater is 4 mm of steel, with con- ductivity of 15 W/m K, and that a maximum 5oC difference between the two fluids is allowed in the design.

  Determine thickness of viscous sublayer in a smooth pipe

Determine the thickness of the viscous sublayer in a smooth 20 cm diameter pipe, if the Reynolds number is 25000.

  What return period must an engineer use in the bridge

What return period must an engineer use in the design of a bridge opening for 50% risk that flooding will occur at least once in two successive years

  Determine ratio of heat supplied to engine to heat removed

a reversible refrigerator removesm heat from sink at 8c and rejects heat to the atmosphere at 15c the refrigerator is coubled to the outputnof a reversible heat engine which receives heat at 577c and reject to the atmosphere at 15c

  Determine the weight of bar for distance between two base

The bar is 1m long and its weight, W, acts at its midpoint. The angle is a=30 degrees, and the the spring constant k= 100N/m. The spring in its current position is 1.52m long, and its unstretched length of 1.25 m occurs when the bar is vertical a=..

  Find ratio of he volume in colorado over that in new york

In New york you had a balloon inflated with helium (He) and you measured its temperature, which was 89.6 degree F, and its pressure, which was 100,000 N/m^2. In Colorado, however, you noticed that the temperature of the He was 69.8 degree F and th..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd