What is the station of the pt on a single-lane highway

Assignment Help Civil Engineering
Reference no: EM13310658

A Horizontal curve on a single-lane highway has its PC at station 123+70 and its PI at station 130+90. The curve has a super-elevation of 0.06 ft/ft and is designed for 70 mph. What is the station of the PT?

Reference no: EM13310658

Questions Cloud

Determine the detention time within the tubes in minutes : Consider a high-rate sedimentation basin with tube settlers. The basin is 120 feet long and 30 feet wide. The length of the basin covered by tube settlers is 90 feet. The water depth is 15 feet.
Multinational organizational that engages in the dependent : Atlantis Global Corporation (AGC) is a multinational organveloization that engages in the depment, manufacture, and marketing of electronic circuit boards for use in high-definition TV screens. Although the design centers are located in the United St..
Calculate the compressive strength of the concrete : A concrete cylinder of height 8 inches and diameter of 4 inches was tested in the lab. The maximum compressive force was found to be 150,000 lbs and a tensile force of 25000 lbs.
What would be its final velocity : A fictional spaceship accelerates at a constant rate of 0.107 m/s2. What would be its final velocity
What is the station of the pt on a single-lane highway : A Horizontal curve on a single-lane highway has its PC at station 123+70 and its PI at station 130+90. The curve has a super-elevation of 0.06 ft/ft and is designed for 70 mph. What is the station of the PT
Determine what is the stationing of the pc and pt : A horizontal curve is being designed through mountainous terrain for a four-lane road with lanes 10 ft. wide. The central angle is known to be 40 degrees, the tangent distance is 520 ft., and the stationing of the tangent intersection (PI) is 2600..
What is the gauge pressure : A submarine dives to a depth of 310 feet in the ocean. What is the gauge pressure at this depth? How many atmospheres is this
Describe the leadership styles of john and shawn : How would you describe the leadership styles of John and Shawn?
Explain what design speed was used to design the curve : A freeway exit ramp has a single lane and consists entirely of a horizontal curve with a central angle of 90 degrees and a length of 628 ft. If the distance cleared from the centerline for sight distance is 19.4 ft

Reviews

Write a Review

Civil Engineering Questions & Answers

  Derive the method-of-moments estimators for the parameters

Suppose an expert hypothesizes that the probability of a rainfall event causing a particular stormwater retention pond to overtop can be modeled with a beta (a, B ) distribution. Over n years of data collection, the percentages of rainfall events

  What will be the force in newtons required

A lunar module weights 1500 kg on earth where g = 9.75 mps2. On the surface of the moon where g = 1.70 mps2, what will be the force in Newtons required to accelerate the module at 10 mps2?

  What is the specific weight of the hexagonal mass

a rectangular prism box which is floating on water has a length L =1200mm, breadth = 800mm, height = 500mm and mass of 52kg. when the box is loaded with the suspended hexagonal mass, its immersion is 300mm, and when it the mass is placed inside th..

  Determine the horizontal and vertical components of reaction

The winch consists of a drum radius 4 in., which is pin connected at its center C. At its outer rim is a ratchet gear having a mean radius of 6 in. The pawl AB serves as a two-force member (short link) and keeps the drum from rotating.

  What will temperature rise of lead be if there is no cooling

Consider the steady-flow energy equation applied to the given extrusion process. Since the die is horizontal then there will be no change in potential energy from inlet to outlet. Hence the potential energy terms can be neglected.

  Determining axial load of a dense sand

A dense sand has an effective friction angle of 43 and c'=0. A dry, 2.8-inch diameter sample is tested in drained triaxial shear with a confining pressure of 2500 psf. What axial load, P (in pounds), will be required to fail the sample?

  What is the angular velocity of the carriers

If the outer ring rotates in the clockwise direction at 7 rpm and the inner ring rotates in the counterclockwise direction at 12 rpm, what is the angular velocity of the carriers and what is the velocity of C, the center of the top carrier.

  What are the basic differences between the afl as a labor

What are the basic differences between the AFL as a labor union and the CIO type of union?

  Finding the gallons of mercury

How many gallons of mercury (sg=13.54) would weight the same as 5 gallons of castor oil which has a specific weight of 56.69 pcf?

  Draw the shear diagram for the shaft

Draw the shear diagram for the shaft. The bearings at and exert only vertical reactions on the shaft

  Problem related to specific gravity of solids

A soil specimen has a water content of 18% and a wet unit weight of 118.5 lb/cu. ft. The specific gravity of solids is found to be 2.72. Find the:

  Determine length of the cable between the pulleys a and b

Cylinders C and D are attached to the end of the cable. if D has a mass of 600 kg, determine the required mass of C, the maximum sag h of the cable, and the length of the cable between the pulleys A and B.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd