What is the so2 concentration caused only by second plant

Assignment Help Civil Engineering
Reference no: EM13305462

An existing power plant has been found to produce SO2 concentration of 20µg/m3 at a distance of 800m directly downwind from the stack when the wind is 4m/s from the north during a class C stability situation. At a later date, another plant is built 200m to the west of the original power plant. It burns 8000kg/hr of fuel oil that contains 0.5% sulfur. The second plant has an effective stack height of 60m and has no SO2 emission controls. For the same atmospheric conditions A)What is the SO2 concentration caused only by the second plant? B)estimate the percent increase in SO2 concentrations at the downwind site due to the second plant.

Reference no: EM13305462

Questions Cloud

Determine horizontal component of reaction that pin exert : Determine the horizontal component of reaction that the pin A exerts on the two-member frame. Set F = 500 (Find Ax) Determine the vertical component of reaction that the pin A exerts on the two-member frame.
What is the lowest resonant frequency of this string : A 121 cm length of string has a mass of 2.40 g. It is stretched with a tension of 6.80 N between fixed supports. What is the lowest resonant frequency of this string
The delivery of quality healthcare : How has the physician-patient relationship changed over the past century? Are the changes good or bad for the delivery of quality healthcare?
How many elements would we find in nature : If the principal quantum number n were limited to the range from 1 to 5, how many elements would we find in nature
What is the so2 concentration caused only by second plant : An existing power plant has been found to produce SO2 concentration of 20µg/m3 at a distance of 800m directly downwind from the stack when the wind is 4m/s from the north during a class C stability situation.
Determine the frequency of the dampened oscillation : A 8.90 kg object oscillates at the end of a vertical spring that has a spring constant of 1.95 multiply.gif 104 N/m. Calculate the frequency of the dampened oscillation
Determine the velocity of each ball after impact : Two identical pool balls of 57.15 mm diameter may move freely on a pool table. Ball B is at rest and ball A has an initial velocity v=v0i. (a) knowing that b=50 mm and e=0.7, determine the velocity of each ball after impact.
Case study-strategy at virgin group : Analyse possible alternative strategies relating to substantive growth, limited growth or retrenchment A
Compute the speed of the bird : A bird is flying directly toward a stationary bird-watcher and emits a frequency of 1230 Hz, What is the speed of the bird

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the load p if the total elongation of the system

A 0.25 in diameter copper rod BC is securely attached between two identical 1 in diameter steel rods (AB and CD). Find the load P if the total elongation of the system is measured to be 0.0312 in. Esteel= 29,000ksi, Ecopper=17,000ksi.

  Design a simply supported one-way reinforced concrete slab

Design a simply supported one-way reinforced concrete floor slab to span 10 ft and carry a service live load of 175 psf and a service dead load of 25 psf. Use fc' = 3000 psi and fy = 60,000 psi.

  Determine the maximum and minimum stress intensities

Determine the maximum and minimum stress intensities in the section.

  Determine the maximum power output of the pelton wheel

The Pelton wheel is 3.0 m in diameter, and the nozzle exit is 0.2 m in diameter. Determine the maximum power output of the Pelton wheel. Is a Pelton wheel the appropriate turbine type for this application

  What is the factor of safety against sliding

a concrete dam retaining water has a specific weight of concrete of 23.5kn/m3, what is the factor of safety against sliding & overturning and pressure intensity on the base if coefficient of friction is 0.45.

  Determine what minimum diameter piston is required

A hydraulic cylinder must produce a minimum force of 3 kN for a pressure of 800 kPa. What minimum diameter piston is required

  Angular acceleration of the spool

determine the angular acceleration of the spool and the acceleration of the trailer. The wheels have negligible mass and are free to rotate.

  Temperature and velocity of the air-adiabatic nozzle

Air at 200 kPa and 950 K enters an adiabatic nozzle at low velocity and is discharged at a pressure of 80 kPa. If the isentropic efficiency of the nozzle is 92%, determine the temperature and velocity of the air at the exit.

  What is the lenght of the critical exterior flaw in the bar

A hot-rolled 7-mm-diameter steel rod is axially loaded at room Temp under a fully reversed cyclic loading. under the rotating beam test, the endurance limit for this steel is 470 MPA, under static loading the ultimate strenght is 1200 MPA.

  How many inches of rain can fall over the entire barge

A barge measures 10 ft (depth) by 35 ft by 120 ft and weighs 100 U.S. tons. The barge floats in fresh water (specific weight = 62.4 lb/ft3) and is evenly filled with 38,000 bushels of corn (60 lb/bushel).

  Determine what portion of the tube needs to be reinforced

The copper pipe has an outer diameter of 2.50 in. and an inner diameter of 2.30 in. if the allowable shear stress in the pipe is 2 ksi, what portion of the tube needs to be reinforced

  Determine what is the euac for a 10-year period

Zwango Plus Manufacturing experts that fixed costs of keeping its Zephyr Hills Plant operating will be $1.4M this year. If the fixed costs increase by $100,000 each year, what is the EUAC for a 10-year period Assume the interest rate is 12%.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd