What is the range of water contents of the in-situ soil that

Assignment Help Civil Engineering
Reference no: EM13542225

1.At the instant shown particle A is traveling to the right at 5 m/s and has anacceleration of 1 m/s2. Determine the initial speed of v0 of particle B so that when itis fired at the same instant from the angle shown it strikes A. Also, at what speed does it strike A?

2.The specifications for a project specify that the in-situ soil must be compacted to 98% of its maximum Modified Proctor Density. What is the range of water contents of the in-situ soil that will meet this criteria?

Reference no: EM13542225

Questions Cloud

Volution and natural selection lab : Volution and Natural Selection Lab
Compute and plot the water surface profile upstream of the : A rectangular channel leading from an upstream lake has a bottom width of 20 ft, bottom slope of 0.0002, a Manning roughness factor of 0.016, a discharge of 403 cfs, and normal depth of 6.24 ft. Then at the downstream end the flow depth is 4.915 ft. ..
Determine the normal depth and the froude number : A trapezoidal channel lined with d50 = 10 cm has a bottom width of b = 1.2 m, side slopes of m = 3, and a longitudinal bottom slope of S0 = 0.008. Determine the normal depth and the Froude number for Q = 1.4 m3/s.
Define the logarithmic mean : Define the logarithmic mean c' of the input and output substrate concentrations - Show that the total rate of removal of substrate V satisfies the Michaelis-Menton reaction rate
What is the range of water contents of the in-situ soil that : The specifications for a project specify that the in-situ soil must be compacted to 98% of its maximum Modified Proctor Density. What is the range of water contents of the in-situ soil that will meet this criteria?
Draw the shear and bending-moment diagrams : For the beam and loading shown, 2) draw the shear and bending-moment diagrams, B) determine the maximum absolute values of the shear and bendnig moment.
The parallel resonant converter as a single-phase : The parallel resonant converter as a single-phase high-quality rectifier.It is desired to utilize a transformer-isolated parallel resonant dc-dc converter in a single-phase low-harmonic rectifier system
What stress on the structure will lead to its failure : A structure is designed with a factor of safety of 5.25 psi. If the allowable stress of the structure is 3000 psi. What stress on the structure will lead to its failure?
What will be the probability of error : Which hypothesis will she accept and what will be the probability of error?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the minimum required vehicle frequency

A light rail route has 2 terminals and 4 intermediate stations. The demand (passengers/hr) for morning peak hour is: North Terminal Station 1 Station 2 Station 3 Station 4 South Terminal

  Determine how much butane would be needed to burn

You have a contaminated air stream containing 1000 ppmV of toluene and you decided to incinerate to a DRE of 99.9%. You are using butane as fuel to reach the temperature and consider the lean toluene has no heating value.

  What is concentration of fe needed to maintain concentration

At a wastewater treatment plant, FeCl3 (s) is added to remove excess phosphate from the effluent. Assume the following reactions occur: FeCl3(s) Fe3+ + 3Cl- Fe3+ + PO4 (3-) FePO4 The equilibrium constant for the second reaction is 10^26.4.

  Factors of safety against sliding and against overturning

Determine the factors of safety against sliding and against overturning, and also the soil pressure at the heel and toe. Assume hydrostatic uplift varies uniformly from full hydrostatic head at the heel of the dam to zero at the toe. consider 1m l..

  Explain how to design for bending only using lrfd

A simply supported steel beam over a 24-ft span carries a uniformly distributed dead load of 2 k/ft, including an allowance for the self-weight, and a live load of 3.5 k/ft. The steel is A992, Grade 50.

  What will the ammonia concentration be 10 miles downstream

The concentration of ammonia is 6 mg/L at one point in the river. If the first - order decay coefficient for the conversion of ammonia to nitrate is 0.05 day-1, what will the ammonia concentration be 10 miles downstream.

  Determine what should be the diameter of each basin

A 4 mgd water treatment planet is being designed for an overflow rate of 0.5 gpm/ft^2. If two circular sedimentation basins will be used at al times, what should be the diameter of each basin

  How long will it take him to reach the same velocity the

For the free-falling patachutist with linear drag, assume a firstjumper is 70 kg and has a drag coefficient of of 12 kg/s. If a second jumper has a dragcoefficient of 15 kg/s and a mass of 75 kg, how long will it take him to reach the same velocity t..

  Determine the arrival rate assuming that it is unchanged

Determine the arrival rate assuming that it is unchanged over the duration of the observation period. An approach to a pretimed signal with a 60second cycle has nine vehicles in the queue at the beginning of the effective green.

  What is the dry unit weight the saturated unit weight

What is the dry unit weight, the saturated unit weight, and the buoyant unit weight, of a soil having a ratio of 0.5 and a value of Gs of 2.7

  Calculate the drawdown at the well

Calculate the drawdown at the well (use r which is the distance from the pumping well = 18 in) with total withdrawals from storage

  How to determine the two possible depths of flow

A 200 m wide natural stream, whose cross-section can be approximated by a rectangular cross-section, contains a dischargeof 80 cumecs. If the specific energy of the flow is 1.5 timesthe minimum specific energy

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd