Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
An hydraulic motor is connected with a hose to a pump and powers a conveyor on a harvesting machine. Oil flows in a 16 ft hydrualics hose from the pump to the motor. The oil propoerties are: 0.9 specific gravity, and 36.5 cS viscosity. Flow rate is 15 GPM and the inside diameter of the hose connected to the motor is 0.5 in. What is the pressure drop between the pump and the motor?
The rotor shafte of a helicopter drives the rotor blades that provide the lifting force and is subjected to a combination of torsion and axial loading. it is known that normal stress is 68 MPa and shear stress is -100 MPa.
What is the equivalency factor for the 14 kip single axle?
A solid steel shaft of circular cross section and diameter 6 inches in pure torsion under torque. If E=30x10^6 pse and max shear stress is 30 ksi, calculate the torque. If the shaft was hollow, with an innner diameter of 2 inches and outer diameter..
If the superelevation is .10 at the station of the PC is 17+35, what is the station of the PI and how much distance must be cleared from the center of the lane to provide adequate stopping sight distance
Water flows uniformly in a 6 m wide rectangular channel at a depth of 0.8m. The channel slope is 0.0015 and n=0.014. Find the flow rate in m3/s
Water leaves a reservoir at 0.05 m^3/s through a 200-mm riveted steel pipeline that protrudes into the reservoir and then immediately turns a 90º bend with a local (minor) loss coefficient equal to 0.3.
A distance of 200 ft must be taped in a manner to ensure a standard deviation smaller than ± 0.03 ft. What must be the standard deviation per 100 ft tape length to achieve the desired precision?
Suppose there were reason to believe that incomes in some population were normally distributed, with a mean of $47,000 per year, and a standard deviation of $5,500 per year.
A circular concrete pipe (n = 0.012) carries a discharge of 450 cfs with a slope of 0.008 and is designed to run no more than 60% full (by depth). What diameter pipe would you recommend
A river upstream of a brdige corssing is 3 meters deep and has an average velocity of 3 m/s. The bridge piers cause a constriction in the width of the flow by 12%.
A condition where there are no net external forces acting upon a particle or rigid body and the body remains at rest. ... forces acting upon a particle or rigid body and the body remains at rest or continues at a constant velocity.
The cycle has a thermal efficiency of 35%, and steam changes from saturated vapor at 300 C during the heat addition process. If the mass flow rate of the steam is 2kg/s, determine the net power (kw) output of this engine.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd