What is the pressure difference measured by the manometer

Assignment Help Civil Engineering
Reference no: EM13315508

The "U"-tube manometer containing mercury of density 13600 kg/cubic meters is used to measure the pressure drop along a horizontal pipe. If the fluid in the pipe has a relative density of 0.8 and the manometer reading is 0.6 meters, what is the pressure difference measured by the manometer (kN/cubic meter)?

Reference no: EM13315508

Questions Cloud

Determine what tensile force should be applied to the bar : Suppose that in an apparatus it is necessary to maintain precisely the cross section of a 20mm circular nickel steel bar. If this bar is heated to 200 deg Celcius, what tensile force should be applied to the bar to maintain its cross sectional dim..
What temperature will the top of the hood reach : Assume the steel in the body of an automobile has an emissivity of 0.3 and a specific heat of 450 J/Kg-degree C. What temperature will the top of the hood reach
Determine the increase in diameter caused by applied force : A cast brass rod 60mm in diameter and 150mm long is compressed axially by a uniformly distributed force of 200kN. Determine the increase in diameter caused by the applied force, E=85GPa; poisson's rato=.30
What is the kinetic energy of the electron : An electron is released from rest at the negative plate of a parallel plate capacitor and accelerates to the positive plate, What is the kinetic energy of the electron just as it reaches the positive plate
What is the pressure difference measured by the manometer : The "U"-tube manometer containing mercury of density 13600 kg/cubic meters is used to measure the pressure drop along a horizontal pipe. If the fluid in the pipe has a relative density of 0.8 and the manometer reading is 0.6 meters
What are the interface design boundaries and issues : what are the interface design boundaries and issues for the design and installation of a new toilet for a building
Small game development : Small game development - the development has to be done in PROLOG LANGUAGE.
Determine lengths l1 and l2 so the two materials elongate : a solid cylinder of 50 mm diameter and 900 mm length is subjected to a tensile force of 120kN. One part f the cylinder L1 long is of steel, the other part, fastened to steel, is aluminum and is L2 long.
What is the percentage error in the bulk unit weight : What is the percentage error in the bulk unit weight if the soil is the percentage error in the bulk unit weight if the soil is 95% saturated but assumed to be 100% saturated

Reviews

Write a Review

Civil Engineering Questions & Answers

  Conduiting with a roughness coefficient

Given an 18-in. concrete conduit with a roughness coefficient of n = 0.013, s = 0.02, and a discharge capacity of 15 cfs, what diameter pipe is required to triple the capacity?

  Determine how much did the entropy increase

A computer CPU chip consists of 50 g silicon,20g copper, and 50 g polyvinyl chloride (plastic). It heats from 15?C to 75?C as the computer is turned on. How much did the entropy increase

  Factor of safety with respect to tensile failure

The maximum gage pressure is known to be 8MPa in a spherical steel pressure vessel having a 250mm diameter and a 6mm wall thickness. Knowing that the ultimate stress in the steel used is (sigma u)= 400MPa, determine the factor of safety with respe..

  Determine the direction of the resultant force measured

If F_1=470N and theta=26 degrees, determine the magnitude of the resultant force of the three forces acting on ring A. Determine the direction of the resultant force measured counterclockwise from the positive x-axis.

  Determine the deflection of a simple uniformly loaded

Determine the deflection of a simple uniformly loaded beam by the Ritz method,using first one term, then two terms, adn finally three terms in a sine series. Why does the coefficient of sin2piex/L vanish?

  Determine the detention time within the tubes in minutes

Consider a high-rate sedimentation basin with tube settlers. The basin is 120 feet long and 30 feet wide. The length of the basin covered by tube settlers is 90 feet. The water depth is 15 feet.

  Find the maximum principal effective stress at failure

Given the initial effective stress state at a point within a soil mass (s_y=2.5 daN/cm2, s_x=1.5 daN/cm2, t_xy=t_xy=0.4 daN/cm2) and effective soil shear strength parameters at the same point

  Determine the length of the tangent of the curve

The proposed highway has two tangents of bearings N 45Degrees 54' 36" E and N 1 Degree 22' 30" W. The highway design engineer, attempting to obtain the best fit for the simple circular curve join these tangents, decides that the external is to be ..

  Determine what is the saturation temperature of the system

The aluminum bar has an electrical coil imbedded in it, so that known amounts of heat can be transferred to it. Aluminum has a specific gravity of 2.70 and a specific internal energy given by the formulaU (kJ/kg)=0.94T(C).

  Explain how to determine the power output of the turbine

The water enters at 1 atm at 10 C and the flow rate through the turbine is 40 m3/s. The water is discharged from the turbine 200 m below the intake at 1 atm and the temperature of the water at the discharge is 10.2 C.

  What were the magnitude and the direction of the velecity

If friction between the cars and the rails is neglected, what were the magnitude and the direction of the velecity of the cars after the collision?

  Compute nominal and effective annual interest rate

A bank is offering to sell 6-month certificates of deposit for $9800. At the end of 6 months, the bank will pay $10,000 to the certificate owner. Compute the nominal annual interest rate and the effective annual interest rate

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd