What is the pressure difference between two ends of pipe

Assignment Help Civil Engineering
Reference no: EM13297525

500 gpm of water flows through 300 ft of 6 in steel pipe at temperature of 100 oF.The pipe contains two 6 in steel elbows, two fully open gate valves, a fully open 90o angle valve, and a swing check valve. If the discharge end of the pipe is located 20 ft higher than the entrance, what is the pressure difference between the two ends of the pipe?

Reference no: EM13297525

Questions Cloud

Describe did the water depth increase or decrease : For each of the following transitions, draw E2,y2 on the specific energy chart and fully describe the reasoning. a. In a rectangular channel, there is a sudden drop in the channel bottom. Did the water depth increase or decrease
By what factor does the kayakers speed change : A kayaker paddles with a power output of 60.0 W to maintain a steady speed of 1.40 m/s, by what factor does the kayaker's speed change
Determine what is the depth of flow in the case of channel : Water is flowing in a trapezoidal channel with 10 ft bottom width and 2H/IV side slopes. The channel is running on a slope of 0.00778 ft/ft and the flow exerts a shear stress of 1.5 lbs/ft2 on the channel bed. What is the depth of flow in this cas..
Why are common borders and cultural similarities often : Why are common borders and cultural similarities often an additional factor to determine who trades most with whom and why? Use your knowledge of the gravity model to justify your answer through two suitable examples.
What is the pressure difference between two ends of pipe : The pipe contains two 6 in steel elbows, two fully open gate valves, a fully open 90o angle valve, and a swing check valve. If the discharge end of the pipe is located 20 ft higher than the entrance, what is the pressure difference between the two..
Determine the final speed of the black ball : A white billiard ball with mass mw = 1.48 kg is moving directly to the right with a speed of v = 3.05 m/s, what is the final speed of the black ball
What is the total equivalent through volume on the approach : An intersection approach volume is 1,500 veh/h and includes 12% left turns with a through-vehicle equivalent of 2.3 tvu's/left turn. What is the total equivalent through volume on the approach
What is the magnitude of the braking force : A 60 kg bicyclist rides his 9.8 kg bicycle with a speed of 16 m/s. What is the magnitude of the braking force
What is the girls velocity relative to the ice surface : A 45.2-kg girl is standing on a 143-kg plank. Both originally at rest on a frozen lake that constitutes a frictionless, What is the girls velocity relative to the ice surface

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate for the ground distance of the angular coverage 60

If an aerial photograph is taken with this camera tilted angle­­A=35° at an altitude 5000ft., calculate for the ground distance of the angular coverage 60°.

  How to derive the stiffnes of the cantilevered bean

a cantilevered bean has a lenght of L, a cross section area of A, and a flecural rigidity of EI. The free end is free to rotate and displace due to bending. derive the stiffnes of the cantilevered bean. Assume small deformations.

  Concentration of tracer in the reactor

What is the concentration of tracer in the reactor 1 h after tracer addition is terminated? The reactor had an initial concentration of tracer of 1.0 mg/L when tracer addition commenced.

  Find if vehicle is reasonable claim or a gross exageration

an average vehicle puts out nearly 20 lbm of carbon dioxide into the atmosphere for every gallon of gasoline it burns, thus one thing we can do to reduce global warming is to buy a vehicle with higher fuel economy.

  Explain opportunity cost associated with lower input level

As an agronomist you have been approached by a large pepper farmer who wishes to determine an appropriate"yield goal" fot this season. He provides you with yield data for ten year period which indicates that his production has been slowly decreasi..

  Establish a horizontal distance

a tape is calibrated and found to measure 100.04ft between the 0- and 100-ft marks. what measurements should be laid out to establish a horizontal distance of 682.25ft?

  Magnitudes of the additional loads

Determine the magnitudes of the additional loads that must be applied at B and F if the resultant of all six loads is to pass through the center of the mat.

  What is the cumulative depreciation through the end of year

Under the 200% DB depreciation, what is the cumulative depreciation through the end of year four? The useful life of the mixing tank is 9.5 years.

  Identify the risk factors

Tacoma Narrows Bridge. Conduct either a qualitive and quantitive risk assessment on this project. Identify the risk factors that you consider most important for the suspension bridge construction. How would you assess the riskiness of this project..

  Determine what is the volume needed along the road

A roadway is to be designed on a level terrain. The roadway is 500 ft. Six Cross Sections have been selected at 0 ft, 100 ft, 200 ft, 300 ft, 400 ft, and 500 ft. . The cross sections have areas of 130 ft2, 140 ft2, 70 ft2, 110 ft2, 80 ft2, and 25 ..

  Foundation raft of water tower

A circular rc girder for the foundation raft of water tower has dia 10m.the udl load transmittedby 8 coloumn on te girder being 300 kn/m.the width of the beam is 500 mm and the over depth.

  Depth of the sedimentation tank

A drinking water treatment plant will be designed to process a flow of 15,000 m3/d. The sedimentation tank will have a residence (detention) time of 4 hours and the overflow rate (Q/A) of 16 m 3 /m 2 -day. Estimate the required surface area (A), an..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd