What is the overall product water recovery and salt

Assignment Help Civil Engineering
Reference no: EM13552830

A city is considering a 3 stage membrane system to treat brackish groundwater at its water treatment plant, WTP (Qf=1000m^3/d, Cf=2000mg/L TDS). Each stage can perform 60 % water recovery (Qp/Cf) and 90% salt rejection (1-Cp/Cf)

A)What is the overall product water recovery and salt rejection

b)What is final product water flow rate (m^3/day) and quality in terms of TDS (mg/L).

c) how much concentrate needs disposal (m^3/d) and how salty is it (mg/L) ?

Reference no: EM13552830

Questions Cloud

What is the irreducible water saturation of this core plug : A chalk core plug having a pore volume of 17.0307 cm3 is fully saturated with reservoir brine. A synthetic oil flood is conducted on this plug. It is found that 12.25 cm3 of reservoir brine was displaced from this plug by the synthetic oil.
The chief of staff is preparing preliminary studies : The Chief of Staff is preparing preliminary studies for the DHS secretary.
Calculate the volumetric strains : A spherical drop of water has r = .1mm . If the surface tension of water is 72 dynes/cm, calculate the pressure difference across the interface. Express the answer in dynes/cm^2. (Tip: theta = 0 for perfect fluid spheres)
Journal entries to record establishment of the fund : Prepare journal entries to record establishment of the fund and reimbursement of the fund at the end of the current period - Identify the two events that cause a Petty Cash account to be credited in a journal entry.
What is the overall product water recovery and salt : A city is considering a 3 stage membrane system to treat brackish groundwater at its water treatment plant, WTP (Qf=1000m^3/d, Cf=2000mg/L TDS). Each stage can perform 60 % water recovery (Qp/Cf) and 90% salt rejection (1-Cp/Cf)
How long after the rope becomes taut until car b collides : The cars have equal mass. Car A is suddenly given velocity 4 m/s and the rope becomes taut. We know that 40 percent of the system’s kinetic energy is lost during the rope tensioning.
Whistleblower was justified in reporting the company : Decide whether or not the whistleblower was justified in reporting the company's actions. Provide a rationale for your response. I choose Ranbaxy Laboratories
What will be the manometer deflection : The pressure inside a 4 cm hose is 700 kPa. If the water exits through a 2 cm diameter nozzle, what velocity in m/s, can be expected inside the hose ?
Determine the maximum permissible torque tmax : The composite shaft is made of a steel sleeve, which is bonded to a brass core. The outer diameters of the two parts are d1 = 40 mm for the brass core and d2 = 50 mm for the steel sleeve.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the future worth of per year of each plan at age 85

Mike and Susan hope to retire a few years early, they decided to pay closer attention to the predicted amount of retirement benefits and do some analyses on the numbers.

  Determine whether the increased life of the steel bridge

Two bridge designs have been proposed for the new interstate highway to cross Detroit Michigan to Windsor, Ontario. A bridge constructed from wood will cost $6000 and will last for eight years.

  Determine the heat transfer rate from the compressor

In a refrigeration system Refrigerant 22 enters the compressor at 150 kPa and -10 C. It leaves the compressor at 1.0 MPa and 90 C. Assume the mass rate of flow through the compressor is 0.016 kg/s

  Calculating coefficient of permeability

The temperature was 200C, and the void ratio (e) of the soil was 0.43. Calculate the "Coefficient of Permeability" in "centimeters per second" (Given, k = (QL)÷(A Δh t)).

  Tighten the packing on a leaking argon valve

A worker needs to enter a confined space to tighten the packing on a leaking argon valve. Describe two procedures that could be used to isolate the argon line and valve prior to starting work.

  Compute the work done by the gas for the processes

Two pounds of an ideal gas are contained within a piston-cylinder arrangement. The initial volume and pressure are 1 ft3 and 75 psia respectively. The final volume is 3 ft3.

  What must be the standard deviation

A distance of 200 ft must be taped in a manner to ensure a standard deviation smaller than ± 0.03 ft. What must be the standard deviation per 100 ft tape length to achieve the desired precision?

  Determine the linear interpolation function of displacement

Consider a 2D triangular element with the three vertices at 1[1,1], 2[1,2] and 3[2,2]. the displacements at these t hree points are [0.1,0.1], [0.3,0.2] and [0.4, 0.3] mm for point 1,2,and 3 respectively

  How the gravel will be scoured by the flowing water

The trapezoidal channel has a slope of .004. The sides of the canal are sealed with a plastic membrane, which is protected by a 1 ft thick layer of 1 in diameter gravel. The bottom is a 6 in slab of rough concrete.

  Determine what is the anle of internal friction for the sand

a direct shear cell 25.4cm x 25.4 cm in plan is filled with dry sand. a normal load of 6kN is applied to the sample, and the shear failure is 3.5kN. What is the anle of internal friction for the sand

  Discuss the limitations of the monitoring approach

A passive dosimeter is to be designed for use in obtaining monthly average concentrations of atrazine in a stretch of river. Typical concentrations range from 10 to 50 g/L. Atrazine, a herbicide commonly found in runoff from agricultural lands.

  Determine the maximum deflection of collar b

Collar A is dropped 30 inches onto collar B, which is resting on a spring of constant k= 4 lb/in. Assuming perfectly plastic impact (coefficient of restitution e=0), determine the maximum deflection of collar B.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd