What is the maxi-mum permissible upward gradient

Assignment Help Civil Engineering
Reference no: EM131165078

The foundation soil at the toe of a masonry dam has a porosity of 41% and a p, of 2.68 Mg/m3. To assure safety against piping, the specifications state that the upward gradient must not exceed 25% of the gradient at which a quick condition occurs. What is the maxi-mum permissible upward gradient? (After Taylor, 1948.)

Reference no: EM131165078

Questions Cloud

Compute the coefficient of permeability of the sand : The test temperature was 26°C. Compute the coefficient of permeability of the sand for a void ratio of 0.70 and the standard temperature of 20-C. (Ariel A. Casagiantle.)
Find rab for the circuit : Find Rab for the Circuit in figure 1.- Find Req and io in the circuit of fig 2.- Determine the Voltages at the nodes in fig 3.
Primary and secondary target markets : Complete an analysis on the primary and secondary target markets served by your project company. Describe each target group, demographic profile and provide data on the size of the market.
Arranging for private companies to on certain jobs : According to the text privatization is "arranging for private companies to on certain jobs and functions formerly done by government." (Burger, 15) Many of these private companies save money by hiring non union workers. These private companies do thi..
What is the maxi-mum permissible upward gradient : What is the maxi-mum permissible upward gradient? (After Taylor, 1948.)
What steps would you take to collect the physical evidence : What evidence could be immediately available to the investigators? What evidence may be found later when the suspect is identified and arrested? Should a sketch be created while documenting the crime scene? What steps would you take to document the p..
Monopolist produces product which has high investment cost : A monopolist produces a product which has high investment cost. The marginal cost of the product is very small ( negligible ) . The monopolist has a patent for the product. a. Show in a chart the price of goods that would arise if the company is unre..
Most effective and ineffective ways : In your opinion, what're the most effective and ineffective ways for managers to motivate employees?
Government policies to manage external effects effective : What are the external effects ( externalities ) and why they can lead to inefficiencies and government intervention in the markets . Why are some government policies to manage external effects effective ( efficient ) while others are inefficient ( in..

Reviews

Write a Review

Civil Engineering Questions & Answers

  How many pounds of concrete must be attached to beam

How many pounds of concrete (γ=150 lb/ft3) must be attached to a beam having a volume of 4.0 ft3(s.g.=0.65) to cause both to sink?

  Determine the rate at which heat must be transferred to the

Saturated liquid water at 1.0 MPa is throttled adiabatically to a pressure of 0.4 MPa. If the change is kinetic energy is negligible, what percentage of the water evaporates during this throttling process?

  At what speed in stillwater will cavitation first occur

A sphere L ft in diameter is moving horizontally at a depth of 12 ft below a water surface where the water temperature is 50°F. v max = 1.5 V0. where V0. is the free stream velocity and occurs at the maximum sphere width.

  Horizontal motion of plunger and shaft

The horizontal motion of plunger and shaft is arrested by resistance of the attached disk which moves through the oil bath. If the velocity of plunger is v.

  How to design the slab for minimum overall thickness

A one-way solid concrete slab is to be used for a simple span of 16 ft. In addition to its own weight, the slab carries a superimposed dead load of 50 psf and a live load of 75 psf.

  Determine the corresponding normal stress in the wire

An 18-m-long steel wire of 5-mm diameter is to be used in the manufacture of a pretested concrete beam.It is observed that the wire stretches 45 mm when a tensile force P is applied.

  Calculate volume of thickened sludge with solids recovery

A gravity thickener receives 33.000 Lpd of wastewater sludge and increases the solids content from 3.0% to 7.0% with 90% solids recovery. Calculate the volume of thickened sludge.

  Calculate the increase in vertical stress at a depth 1 m

each wire has a tension of 1kN and is inclined at 45 degree to the vertical. calculate the increase in vertical stress at a depth 1 m below the surface and the amount of elastic settlement below the axis of the pole if E = 40 Mpa and v=0.45

  Determine its velocity after it has traveled 10 meters

An offshore drilling rig is being towed out to sea. What is the maximum distance away that the navigation lights can still be seen by an observer standing at the shoreline? The observer's eye height is 5'8", and the uppermost navigation light is 130 ..

  Determine what is the ice point of water in the scale

Devise an absolute temperature scale where the boiling point of water at 1 atmosphere (101 kPa) pressure = 100 degrees in your scale. What is the ice point of water in your scale

  Determine the discharge coefficient for the nozzle meter

An unknown fluid flows through a horizontal 35-mm-diameter pipe with a Reynolds number of 100,000 and a density of 680 kg/m3. The pressure drop across a 21-mm-diameter nozzle meter placed in the pipe is 4.2 kPa.

  Aerotron electronics is considering purchasing a water filtr

Aerotron Electronics is considering purchasing a water filtration system to assist in circuit board manufacturing. The system costs $40,000. It has an expected life of 7 years, at which time its salvage value will be $7,500. Operating and maintenance..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd