What is the kinetic energy in the system

Assignment Help Mechanical Engineering
Reference no: EM131378725

Figure P18.16 shows a 1000-kg mass being lowered by a cable at a uniform rate of 4 m/s from a drum of 550-mmdiameter weighing 2.5 kN and having a 250-mm-radius of gyration.

(a) What is the kinetic energy in the system?

(b) The uniform rate of descent is maintained by a brake on the drum which applies a torque of 2698 N m. What additional brake torque is required to bring the system to rest in 0.60 s?

143_68249d86-c457-4396-a9fb-03eb006468e8.png

Reference no: EM131378725

Questions Cloud

Will kruses slowness necessarily invalidate the contract : When he dropped out of school, he was in the eighth grade but was doing less than sixth grade-level work. Will Kruse's "slowness" necessarily invalidate the contract? Explain.
What did influences did hellenism have on the bactria people : What did influences did Hellenism have on the Bactria people and what did the Bactria people accept from Hellenism
Why firm in pure competition is considered to be price taker : Describe the profit maximizing (or loss minimizing) output for this firm. Explain why or why not there an accounting profit? Explain why a firm in pure competition is considered to be a "price taker."
Is it legally permissible to remove illegal part of contract : Is it legally permissible to remove the illegal part of a contract so that the court can uphold the legal part? Should the court sever the illegal clause in this case? Explain.
What is the kinetic energy in the system : The uniform rate of descent is maintained by a brake on the drum which applies a torque of 2698 N m. What additional brake torque is required to bring the system to rest in 0.60 s?
Why do you think the pso members reacted : Why do you think the PSO members reacted as they did - Is there anything inherently wrong with the matrix design? Is it inappropriate for psychiatric hospitals?
Why did appeals court overturn decision of the trial court : The case then went to the Second Circuit Court of Appeals, which decided that the trial court had made a mistake in dismissing the case. Why did the appeals court overturn the decision of the trial court? Explain.
Would the exculpatory clause be upheld by the courts : During the photo shoot, Audley was bitten on the head by the adult male lion with which she had been posing. Audley brought suit against Melton. Would the exculpatory clause be upheld by the courts? Explain.
What is social democracy : How are the problems that can develop with industrial capitalism related to Socialism and Social democracy. What is social democracy

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  What is the convection coefficient of water flowing in tube

Saturated liquid water at 30°C and 1.8 m/s enters a long brass (k = 108 W/m-K) condenser tube with inner diameter of 1.45 cm and outer diameter of 1.6 cm. The heat transfer coefficient for condensation at the outer surface of the tube is 12,232 W/m2-..

  Foreman favored higher reductions

The project engineer, the shop foreman, and a consultant met to discuss the problem. The consultant proposed applying forward and back tension during rolling, the project engineer suggested reducing the reduction per pass, and the shop foreman fav..

  Determine the radiation heat flux

Determine the radiation heat flux when a very thin layer of high-emissivity paint, sp = 0.98, is applied to both surfaces - Determine the radiation heat flux when the paint layers

  Which fin has the largest heat transfer rate

For fins of equal length and therefore equal mass, which fin has the largest heat transfer rate? Assume the gas properties are those of air at T = 350 K.

  After 10 lbhr of the oil is removed from the potato chips

after 10 lbhr of the oil is removed from the potato chips in the separation unit what is the mass fraction of oil on

  For the same number of air-conditioning units and the same

a room that normally contains 40 people is to be air-conditioned with window air- conditioning units of 5-kw cooling

  Find the travel speed of the table at the operating speed

A leadscrew connected directly to a DC servomotor is the drive system for a positioning table. The leadscrew pitch = 4 mm. The optical encoder attached to the leadscrew emits 250 pulses/rev of the leadscrew.

  Determine for the steam exiting the tank-mass flow rate

Three return steam lines in a chemical processing plant enter a collection tank operating at steady state at 1 bar. Steam enters inlet 1 with flow rate of 0.8 kg/s at 200 C. Steam enters inlet 3 with flow rate of 1.2 kg/s at 95 C. Steam exits the tan..

  Determine the savings associated with application

Determine the savings associated with application of a 10-mm-thick coating of urethane insulation (k = 0.026 W/m · K) to the outer surface of the pipe.

  Gauge pressure at the oil-water interface

A barrel contains a 0.120-m layer of oil floating on water that is 0.250 m deep. The density of the oil is 600 kg/m.

  Seven kilograms of air is contained in a constant

Four kilograms of water initially at 200 degree Celsius and 0.5 MPa undergo an isothermal, internally reversible compression process to the saturated liquid state. Determine the work and heat transfer involved in the process (in kJ). Sketch the proce..

  Determine the rate of heat transfer

A section of a composite wall with the dimensions shown below has uniform temperatures of 200°C and 50°C over the left and right surfaces, respectively. If the thermal conductivities of the wall materials are: kA = 70 W/(m K), kB = 60 W/(m K), kc ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd