What is the head loss due to friction per 1000 m of pipe

Assignment Help Civil Engineering
Reference no: EM13322666

Water flows through a 250-mm diameter steel (C=120) pipe at a a velocity, V = 1.5 m/s. Using the Hazen-Williams equation, what is the head loss due to friction per 1000 m of pipe? What is the head loss that would occur through a 45 degree elbow?

Reference no: EM13322666

Questions Cloud

Name and briefly describe each of these categories : Streaming video can systems can be classified into three categories. Name and briefly describe each of these categories?
What is the average force on the rope during the tow : The 5.5 Mg humpback whale is stuck on the shore due to changes in the tide. In an effort to rescue the whale, a 12-Mg tugboat is used to pull it free using an inextensible rope tied to its tail.
Explain combustion of the alternative fuel and hydrogen gas : The combustion of the alternative fuel, hydrogen gas, released 286 kj per mole of hydrogen gas combusted. if 10.0 l of hydrogen gas at STP was burned to produce electricity, how long would it power a 100 watt light bulb. assume no energy is lost t..
Modify the test scores program : Also print a report of the each student's test grades, average and final grade as a table, and then print the averages of each Test and overall Test Average, as well as highest Test Grade of all Tests and the student with thehighest class grade.
What is the head loss due to friction per 1000 m of pipe : Water flows through a 250-mm diameter steel (C=120) pipe at a a velocity, V = 1.5 m/s. Using the Hazen-Williams equation, what is the head loss due to friction per 1000 m of pipe
What is the centerline uniform water depth in the channel : A 2-ft diameter circular pipe has a Manning's n of 0.013 and a bed slope of 2.0 X 10^-3. What is the uniform flow rate in this pipe if it is completely full (Qf) in ft^3/s
State what effect on the value of ca(oh)2''s ksp : What effect on the value of Ca(OH)2's Ksp (6.5x10^-6 ) would sucking up some suspended calcium hydroxide solid have. Would the Ksp value be higher or lower than the normal value. Why
Outline the major influences on business buyers : Outline the major influences on business buyers. Why is it important for the business-to-business buyer to understand these major influences?
What it is role is in the overall program : Improve the program's functionality by utilizing at least 5 of the concepts from the list below. Document how the game works, including how you utilized each of the chosen concepts and what it's role is in the overall program.

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is difference in the density and specific weight of air

What is the difference in the density and specific weight of air if pressure increases from 1 to 50 atmospheres if temperature is kept at 4 degrees Celsius

  What total allowable bod kg per day could be discharged

A 5000 m3/day wastewater treatment plant discharges to a river with a minimum drought flow of 140 m3/min (upstream of outfall) a)What total allowable BOD (kg/day) could be discharged by the plant if the BOD in the river after initial dilution must ..

  What is the exit pressure p2 if friction head loss is 350 ft

Water ?ows at 6 ft/ s through a pipe 500 ft long with diameter 1 in. The inlet pressure p1= 200 psig, and the exit section is 100 ft ft higher than the inlet.

  Discuss the limitations of the monitoring approach

A passive dosimeter is to be designed for use in obtaining monthly average concentrations of atrazine in a stretch of river. Typical concentrations range from 10 to 50 g/L. Atrazine, a herbicide commonly found in runoff from agricultural lands.

  Usage rates if the community has a declining growth rate

Determine how many years from now the consumption will reach its design capacity with current usage rates if the community has a declining growth rate.

  What is the percentage error in the bulk unit weight

What is the percentage error in the bulk unit weight if the soil is the percentage error in the bulk unit weight if the soil is 95% saturated but assumed to be 100% saturated

  Determine the required area of the members

The truss is to be constructed of members with equal cross-sectional areas and using a material with yield stress 700 MPa. The structure must be designed to support a mass (m) of 3400 kg with a factor of safety of 3.

  Determine diameter of the shaft at allowable shear stress

The pulley at B is connected to a motor that is driving the system. The other three pulleys are consuming the power delivered by Pb . Pa = 20kW, Pb = 75kW, Pc = 30kW, and Pd = 25kW and the shaft is rotating at 120rpm.

  Find an expression for the pressure gradient in x-direction

A frictionless, incompressible steady flow field is given by V=2xyi-y^2j in arbitrary units. Let the density be ρ_0=constant and neglect gravity. Find an expression for the pressure gradient in the xdirection.

  Determine what is the angular velocity of the pendulum

A pendulum consists of a slender rod, AB, of weight Wr= 8.60 lb and a wooden sphere of weight Ws= 21.7 lb .(Figure 1) The length of the rod is d = 7.70 ft and the radius of the sphere is R = 0.500 ft .

  Design a curve for highway by stationing of the pc and pt

A horizontal curve is being designed for a new two-lane highway(12-ft lanes). The PI is at station 250 + 50, the design speed is 65 mi/h, and a maximum superelevation of 0.07 ft/ft is to be used.

  Determine what is the void ratio of the soil

In its natural state, a moist soil has a volume of 0.33 ft3 and weighs 42.55 lb. The oven-dried weigth of the soil is 35.56 lb. If Gs = 2.63, what is the void ratio of the soil

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd