What is the effective resistance of the combined four lamps

Assignment Help Electrical Engineering
Reference no: EM13289545

Four 18W lamps are connected in parallel across 6V. Draw circuit. What is the current though each lamp? What is the resistance of each? What is the effective resistance of the combined four lamps?

Reference no: EM13289545

Questions Cloud

Define temperature of the sodium is not to increase : Liquid sodium is being considered as an engine coolant. How many grams of liquid sodium (minimum) are needed to absorb 4.00 MJ of energy (in the form of heat) if the temperature of the sodium is not to increase by more than 10.0 °C? Use CP = 30.8 ..
Describes a framework to address right post-tender : Describes a framework to address right post-tender negotiation process based on documentation and justification of why you decided to start with PTN.
Calculate the charge dq lying on the circular strip : An hemisphere shell of radius R has a uniform surface charge density σ. The shell spins about its axis at angular frequency ω. Calculate the charge dq lying on the circular strip θ--> θ + dθ at radius R and colatitude θ.
Calculate the npv of the assembler : ABC Service can purchase a new assembler for $15,052 that will provide an annual net cash flow of $6,000 per year for five years. Calculate the NPV of the assembler if the required rate of return is 12%. (Round your answer to the nearest $1.)
What is the effective resistance of the combined four lamps : Four 18W lamps are connected in parallel across 6V. Draw circuit. What is the current though each lamp What is the resistance of each What is the effective resistance of the combined four lamps
Explain what is the specific heat of the gas : During this process, 346 J of work was done by the system and its internal energy increased by 6275 J. What is the specific heat of the gas
Find the resistance of an electric light bulb for a current : 1.) Find the resistance of an electric light bulb if there is a current of a 0.8 A and a voltge potential diference of 120V. 2.) A light bulb uses 1.2A when connected across a 120Vsource. What power is used by the bulb
Develop a state diagram and table for the circuit : Develop a logic circuit whose output is high when the input has had three consecutive ones to the input. Overlapping threes are allowed. (e.g., x=011110110 then the output z=000110000 assuming starting state was 0).
Difference between stratified and random sampling : What is the difference between stratified and random sampling and what were the similarities and differences between oneperquad and twoperquad? Be sure to explain pattern, dispersion, and density.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find what is the polarization of the reflected beam

A collimated light beam from a helium-neon laser at 632.8 nm wavelength impinges on a dielectric film of refractive index of 2.0 at an angle of 75 degrees to normal, with a polarization at 45 degrees to the plane of incidence.

  Find equivalent impedance of transformer of low-voltage

A 3-phase 230 V, 9 kVA, 0.9 PF (lagging) load is supplied by 10 kVA, 1330/230 V, 60 Hz three-phase transformer connected in Y-?. The equivalent impedance of transformer referred to the low-voltage side is 0.12 + j0.25.

  Design a circuit that can perform bcd addition on two digits

Design a circuit that can perform BCD addition on two decimal digits. You don't have to design any of the major components you may use (such as adders, comparators, etc.). Assume all those components are available.

  Calculate the rated armature current

A 240kW 500V 1750 r/min separately excited dc generator has an overall efiiciency of 94%. The shunt field resistance is 60 ohms and the rated current is 5A. The I^2 R loss in the armature is 0.023 pu.

  Find the power available from the black box

given a "black box" with two terminals. You play around with the box for awhileand make the following observations: (i) The output voltage from the box is sinusoidal. (ii) The peak magnitude of the open-circuit voltage at the terminals is 5 V.

  Calculate required armature voltage at rated flux density

A DC motor is driving a load given by TL = 3 + 0.02ωLNm , where ωL is the speed in rad/sec. The armature resistance of the motor, Ra = 2Ω . The machine constants at rated flux density, kE=kT=0.4 (inSIunits).

  What is the range of phase shifts induced by the modulator

Make sure to mark significant points in your figure (amplitude, offset, time, etc.). How could a device be modified to work as an electro-optic phase modulator? If we apply signal V, what is the range of phase shifts induced by this modulator.

  How does it take for light incident perpendicular to glass

A 5.00 cm thick layer of oil is sandwiched between 1.00 cm thick sheet of glass and a 2.00 cm thick sheet of polystyrene plastic. How long (in nano-seconds) does it take for light incident perpendicular to the glass to pass through this 8.00 cm th..

  Determine efficiency of transformer for secondary current

A single-phase, 100-kVA, 1000:100-V, 60-Hz transformer has the following test results: Open-circuit test (FIV side open): 100 V, 6 A, 400 W Short-circuit test (LV side shorted): 50 V, 100 A, 1800 W 1)Determine the voltage regulation at 75% of the rat..

  Calculate the average torque and maximum torque

When the two windings are connected to a a.c supply of 50hz, the field current is 0.1A, the armature current is 100A and the phase difference between them is 60 degree. calculate the average torque and maximum torque.

  What is capacitance of the capacitor after slab is inserted

A 15μF capacitor is connected to a 50 V battery andbecomes fully charged. The battery is removed and a slab ofdielectric that completely fills the space between the plates isinserted. If the dielectric has a dielectric constant of 5.0,

  Determine the inverse of b by using computational method

Given the following: i) The column vectors: X1=[2 4 6]'; X2=[4 5 7]'; X3=[7 8 3]' % Note the above are column vectors (% In Matlab, ' means Transpose). ii) The matrix: A=[X1 X2 X3]. 1)B=A'; % In Matlab, ' means Transpose. This defines B.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd