What is the biomass concentration in aeration tank

Assignment Help Civil Engineering
Reference no: EM13546907

A small community wishes to construct an activated sludge wastewater treatment plant to treat their wastewater. the wastewater from the community has an average flow rate of 0.0022 m^3/s (190 m^3/day) and an influent substrate concentration of 250 mg/L as COD and all of them are essentially soluble. for sizing the syst em, the mean cell residence time is selected to be 5 days. the reactoer kinetic constants are u max= 2.4 d^-1 (1/day), Ks=75 mg/L as COD, Y=0.4 VSS/g COD and Kd=0.096 d^-1(1/day)

the design engineer propsed a fully mixed tank with a volume of 25 m^3. you have asked to evaluate this design and the follow parameters have to be calculated.

1. what is the hydraulic residence time of this reactor?

2. what is the COD removal efficiency of this system?

3. what is the biomass concentration in aeration tank?

4. what is the F/M ratio?

5. what is the sludge production rate?

Hint: K= u max/ Y ( maximum substrate utilization rate) 

Reference no: EM13546907

Questions Cloud

Financial analyses for marketing decision making : I: Financial Analyses for Marketing Decision Making
Products or services to the u.s. government : your company is selling its products or services to the U.S. government
National cranberry cooperative : National Cranberry Cooperative
What is the frequency of simple harmonic motion : A 96 pound mass is attached to a spring. If the fre- quency of simple harmonic motion is 13/pi cycles/s, what is the spring constant k? What is the frequency of simple harmonic motion if the original mass is replaced with an 288 pound mass?
What is the biomass concentration in aeration tank : A small community wishes to construct an activated sludge wastewater treatment plant to treat their wastewater. the wastewater from the community has an average flow rate of 0.0022 m^3/s (190 m^3/day) and an influent substrate concentration of 250 mg..
How much calcium and or magnesium should be removed by the : The given groundwater shows the following chemical composition: Sodium =7 mgIL, Calcium = 70 mg/L, Magnesium = 35 mg/L, Potassium = 1 mgIL Bicarbonate = 200 mg/L, Sulfate = 30 mgIL, pH = 7.5 Atomic mass unit: sodium (23), calcium (40), magnesium (24...
Research the online for at least two articles dealing : Research the Online for at least two articles dealing with Business Sustainability. Summarize the articles. Make sure to include a citation for each. Then explain, whether businesses would practice sustainability, if not forced to?
Determine the specific energy for this flow condition : A trapezoidal channel has a bottom width of 5 feet, a slideslope (horizontal:vertical) of 2, and a depth of flow of 4 feet. The elevation of the channel bottom drops 2 feet every 1000 feet of horizontal distance traveled. The discharge in the channel..
What is the maximum value of z possible with no increase : The flowrate in a rectangular channel is 20 m3/s. The width of the channel is 4 m and the depth of flow is 5 m. If there is an increase in the channel bottom elevation (?z) with NO energy loss, what is the maximum value of ?z possible with no increas..

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the rate of water rise in the lake in one day

A river discharges at a rate of 500 cfs into a lake. The water is drawn from the lake at a rate of 200 cfs. The surface area of the lake is 60 acres (1 acre = 43, 560 ft2). What is the rate of water rise in the lake in one day

  What is h2co3-hco3-co3 2 and partial pressure of co2

The total dissolved inorganic carbon (TIC) of a sample of groundwater is 8.33 mM. The temperature of the aquifer is 15C, the pH is 7.5, and the ionic strength is 0.05 M. What is the H2CO3, HCO3-, CO3 2-, and the partial pressure of CO2

  Calculate the discharge through the flume

A long throated flume is built in a rectangular 1 m widechannel having a throat width of 0.5m. The upstream head is 0.6 m.Assume a Cd of 1.0.

  What is the diameter d of the smallest -size particles

in a hydrometer test , the results are as follows:Gs =2.60 , temperature of water=24c ,and R=43at 60 min after the start of sedimentation . what is the diameter , D, of the smallest -size particles

  The first one is a plug flow reactor with a residence time

Plot the concentration of tracer at the outlet of the each of the two reactors during the first 24 hours of the tracer study. (Hint: You may need to use mass balances to obtain equations that predict the concentration of tracer as a function of time)

  What distance do move in 3 sec and what is tension in cord

Body A and body B are connected by an inextensible cord. If both bodies are released simultaneously from rest, what distance do they move in 3 sec and what is the tension in the cord. The weight of A is 50 lb and the weight of B is 10 lb.

  Find the minimum downstream do that could be expected

For the following waste and river characteristics just upstream from the outfall, find the minimum downstream DO that could be expected

  Identify the risk factors

Tacoma Narrows Bridge. Conduct either a qualitive and quantitive risk assessment on this project. Identify the risk factors that you consider most important for the suspension bridge construction. How would you assess the riskiness of this project..

  What is the rockets acceleration in meters per square

At a certain altitude and time, a rocket's acceleration is 2.5 g. One gravity (g) is equivalent to 32.2 ft/s^2. What is the rocket's acceleration in meters per square second

  Will such a procedure produce a greater flowrate

A 12in diameter water main in your city has become very rough due to rust and corrosion, it has been suggested that the flowrate through the this pipe can be increased by inserting a smooth plastic liner into the pipe.

  Determine the design a typical joint 50mm wide

A floor is to be supported on hardwood timber joists that are spaced at 0.5m centres and span 5.0m. The joists support flooring 20mm thick and an applied live load of 2kN/m2 Design a typical joint 50mm wide

  Determine the velocity of the steam at the nozzle outlet

Helium enters an adiabatic steady-state nozzle at 200kPa and 124 degrees Celsius and 10m/s. At the nozzle exit the temperature of the helium is 100 degrees Celsius and the pressure = 150 kPa.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd