What is the actual power produced by the motor

Assignment Help Electrical Engineering
Reference no: EM13230404

A single phase 1750 RPM moter operating at rated power has a power factor of 0.75 lagging. the line voltage is 208 VAC @60 Hz and the line current is 27A. Assuming 83% is a reasonable efficiency for moters of this size what is the actual power produced by the motor, in watts and horse power?

Reference no: EM13230404

Questions Cloud

What is the magnetic field intensity in the air gap : A coil having 1000 turns is wrapped on ferromagnetic core constructed of sheet steel. The core has a cross-sectional area of 0.0009 m^2 and an average flux path of 30.0 cm. The core also has a length of 2 mm. The flux density in the core and airga..
What is the tax on salvage value : Mars marginal tax rate is 40%, and it uses a 12% WACC to evaluate projects of this nature. The applicable depreciation rates are 20%, 32%, 19%, 12%, 11%, and 6%. If the machine costs $60,000,
Using a pld, develop an i/o port decoder : Using a PLD, develop an I/O port decoder that generates the following high-bank I/O strobes: 300DH, 300BH, 00B6H, and 00EEH.
Understanding of management and organisation issues : Discuss the numerous advances in the understanding of management and organisation issues which have come out of the motor vehicle industry.
What is the actual power produced by the motor : A single phase 1750 RPM moter operating at rated power has a power factor of 0.75 lagging. the line voltage is 208 VAC @60 Hz and the line current is 27A. Assuming 83% is a reasonable efficiency for moters of this size
Under what conditions might a firm favor a level production : In general, under what conditions might a firm favor a level production plan over a chase plan? A chase production plan over a level plan?
Explain work breakdown structure : Explain work breakdown structure. Why do resource constraints affect project results?
Which alternative should be chosen under maxi-max criterion : which alternative should be chosen under the maxi-max criterion - He is pessimistic about where the economy is headed, and so has assigned prior possibilities of 0.1, 0.5, and 0.4 respectively to these three scenarios
Identify the input and the output binary variables : Each of the four members of a "jukebox jury" is provided with a pushbutton; the button is pressed if the record played is a "hit" and is not pressed if the record played is a "miss". Design a digital logic system that lights a lamp

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the joint probability density function and sketch it

Two Random variables have a joint probability distribution function defined by F(x,y)=0 X 1y>1 A). Sketch this distribution function. B). Find the joint probability density function and sketch it.

  Determine k when two real poles break away from real axis

A closed-loop system has a hold circuit and process as shown below. Determine G(z) when T = 1 and Gp(s) = 2 / (s + 2). A sampled-data system such as that presented in the above problem has a sampling period T = 0.05s

  Design controller to operate separate sets of traffic light

The configuration is shown in Figure 6.5. Use six LEDs as shown in Table 6.1 to represent the outputs. The Time in This State can be met in several ways. One method is to use a debounced switch as input, another to input a 1 Hz clock.

  What are the prospects for offshore oil beds

Research about origin, formation process, and age of oil. What type of biota contributed to oil formation How is that linked to marine environment being conducive to oil formation What are the prospects for offshore oil beds

  Approximation of quarter circle using bezier curve

Approximation of quarter circle using Bezier curve, Determine the Bezier curve of order 3 that approximates a quarter circle centered at (0,0), (1,0), (0,1).

  How much the amplitude of envelope increases

Needs to oscillate 5 times per second. Amplitude envelope increases 25% every second. Amplitude is 1 at t =0. The derivative at t = 0 is 54.6371. the sinusoid has to be a cos(2*pi*5*t) for the exponential exp(at).

  How much power p is machine consuming from electrical system

A 600kVA, 600 V, 0.9-PF-leading, Y-connected synchronous motor has a synchronous reactance of 1.0 per unit and an armature resistance of 0.1 per unit. At the current time, EA = 1

  Determine the total current in each line of 3-phase motor

Three -phase motor is connected to a three-phase power source that has an abc phase sequence. the first load is a wye-connected, three-phase motor withdrawing a line current of 20A at a 0.8 lagging power factor.

  Determine the resistance of an aluminum wire having

Show that for wires of identical dimensions but made of different materials, such as copper and aluminum, the resistance is proportional to the resistivity of the material. the resistance of a certain copper wire is 1.5.

  Why does the instruction set include an inc instruction

why does the instruction set include an INC (DEC) instruction to increment (decrement) a memory byte when the same function could be accomplishe using an ADD (SUB) instruction

  Which configuration then would have higher input impedance

The input impedance of a JFET used in COMMON SOURCE configuration, is defined by two considerations: The JFET itself has a VERY HIGH INPUT IMPEDANCE, because the input is the GATE to SOURCE junction that is REVERSE biased

  What will be the step-angle for a hybrid stepper motor

If a stepper motor has a step-angle of 7.5? , what digital input rate is required to produce a rotation of 10 rev/sec What will be the step-angle for a hybrid stepper motor with eight stator windings and ten rotor teeth

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd