Identify the input and the output binary variables

Assignment Help Electrical Engineering
Reference no: EM13230400

Each of the four members of a "jukebox jury" is provided with a pushbutton; the button is pressed if the record played is a "hit" and is not pressed if the record played is a "miss". Design a digital logic system that lights a lamp when a majority of the jury thinks the record is a hit.

1. Identify the input and the output binary variables.

2. Construct a function table for this problem.

3. Develop a sum-Of-Products Logic Function from the function table you constructed above.

4. Use a K-map to minimize the logic function.

Reference no: EM13230400

Questions Cloud

What is the actual power produced by the motor : A single phase 1750 RPM moter operating at rated power has a power factor of 0.75 lagging. the line voltage is 208 VAC @60 Hz and the line current is 27A. Assuming 83% is a reasonable efficiency for moters of this size
Under what conditions might a firm favor a level production : In general, under what conditions might a firm favor a level production plan over a chase plan? A chase production plan over a level plan?
Explain work breakdown structure : Explain work breakdown structure. Why do resource constraints affect project results?
Which alternative should be chosen under maxi-max criterion : which alternative should be chosen under the maxi-max criterion - He is pessimistic about where the economy is headed, and so has assigned prior possibilities of 0.1, 0.5, and 0.4 respectively to these three scenarios
Identify the input and the output binary variables : Each of the four members of a "jukebox jury" is provided with a pushbutton; the button is pressed if the record played is a "hit" and is not pressed if the record played is a "miss". Design a digital logic system that lights a lamp
What should susan recommend : What should Susan recommend? Make or Buy? Why? Choose one.
Create a japplet that contains a jlabel and jbutton. : Create a JApplet that contains a JLabel and JButton. You'll create a JButton that will automatically change font typeface, style, and size when clicked by the user. Change the font typeface, style, and size on the JLabel.
What was the name of the first computer made by apple : What was the name of the first computer made by Apple that had a graphical interface?
Did microsoft invent the disk operating system : Did Microsoft invent the Disk Operating System? Briefly explain the deal Microsoft made with IBM concerning DOS.

Reviews

Write a Review

Electrical Engineering Questions & Answers

  Find the number of customers entering a department store

Suppose that the number of customers entering a department store in a day is a random variable with mean of 50 customers/day. Suppose that the amounts of money spent by each one of these customers are statistically independent.

  Determine what is the minimum sampling frequency

a) What is the minimum sampling frequency b) Specify the number of uniform quantization steps needed and the channel null bandwidth required, assuming that the peak signal-to-noise ratio at the receiver output needs to be at least 30 dB

  Simplify f by boolean algebra as much as possible

Consider the logic function f(a,b,c) = abc + ab'c + a'bc + a'b'c + a'bc'. (a) Draw the logic circuit for the function f given above. (b) Let the cost of a logic circuit be the total number of gates plus the total number of inputs to all gates

  How to implement the power factor correction scheme

A 60-Hz source supplies power to an industrial load through a transmission line of impedance (0.2+ j0.1) ohms. The load consumes 130 kW of power at line voltage VL= 440

  Find the surface temperature in k of the computer chip

For computer chip of 10mm (length), 5 mm(width) is operated by power of 0.645 watt, which surrounded by coolant material of temp of 80 F. Find the Surface Temperature in K of the computer chip during the heat transfer of convection.

  Why is there a thin region of one material type sandwiched

What are the names of the three regions of the bipolar junction transistor Why is there a thin region of one material type "sandwiched" between two layers of the opposite material type

  Find the applied voltage of an iron-core transformer

Find the applied voltage of an iron-core transformer if the secondary voltage is 240 v, and Np = 60 with Ns = 720

  Calculate motor power when the reel turns at 60rpm

A large reel of paper installed at the end of a paper machine. d1 = 2m, J = 1000kgm^2, n1 = 60rpm, Tension on Paper = 1000N. Calculate: a. Motor power when the reel turns at 60rpm. b. Torque to increase speed to 120 rpm in 10 seconds

  How many batteries are needed for the project

A student project is required to be portable and hand held. It requires 6 V DC power at a current of 150 mA. The batteries for the power supply must last for a minimum of 7 hours of continuous operation.

  Design the basic interface circuit for a temperature sensor

Design the basic interface circuit (using an op amp) for a temperature sensor that covers a range of 0 degrees to 70 degrees C if the output of the sensor is 2 mV/1C and the ADC voltage range is 0 to 4 V.

  Deduce expression for power in terms of the line voltage

Show that the power in a three-phase, three-wire system with balanced loads is constant at every instant. Deduce an expression for the power in terms of the line voltage, line current, and the power-factor.

  Draw a band diagram

Calculate the Fermi level position relative to conduction band (Ec-Ef) and relative to valence band (Ef-Ev).

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd